EVOKO EMC1001 Delo Connection Manager Instruction Manual

: June 9, 2024
: evoko

Table of Contents

EVOKO EMC1001 Delo Connection Manager
FCC and ISED Canada Compliance
Getting started
Guarantee terms
ASSEMBLY INSTRUCTIONS
LIST OF PARTS
INSTALLATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EVOKO EMC1001 Delo Connection Manager

CAUTION! Do not insert objects through the venting holes. This may damage the product. Should this still happen, there is no risk to cause injury due to the low voltages inside and the over current protection.
CAUTION! Do not insert objects other than applicable cable contacts into the terminals. This may damage the product. Should this still happen, there is no risk to cause injury due to the low voltages inside and the over current protection.
The product is intended for indoor use in a ventilated area with normal temperatures and humidity (5°C to 40 °C and max 90%RH). Avoid dripping water, condense water etc. Avoid direct sunlight. The product is to be mounted by an instructed person. No servicable parts inside. Only to be opened by skilled service technician.

FCC and ISED Canada Compliance

This device complies with part 15 of the FCC Rules and ISED Canada licence- exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Before using Delo connection manager, review the Delo connection manager User Guide at support.meetevoko.com. Retain documentation for future reference.

Getting started

Follow the mounting instructions to install your Delo connection manager. For instructions on how to configure and use your device see the online see the User Guide at:
www.meetevoko.com/quick-guides/evoko-delo

Safety and Handling
See “Safety, handling, and support” in the Delo connection manager user guide

Guarantee terms

SMS Evoko Group AB guarantees that a product that SMS Evoko Group AB regards as faulty, due to manufacturing defects or defective materials, will be repaired or replaced, if necessary, free of charge, providing that a claim is lodged within the guarantee period, which is two years. The guarantee expressly excludes normal wear.
If a claim is made under the guarantee, the product and the original copy of the receipt/bill of sale are to be returned to SMS Evoko Group AB or to the reseller. The supplier’s name and the date of purchase must be clearly legible on the receipt. The owner is to defray the cost of dispatch, while SMS Evoko Group AB pays the cost of returning the product.
SMS Evoko Group AB’s guarantee does not apply: If the product has been installed and/or used in a manner that does not comply with the user instructions, or has been fitted with unsuitable materials. If the product has been modified or repaired by personnel other than a SMS Evoko Group AB employee or service personnel authorized by SMS Evoko Group AB. If the defect has occurred as a result of external circumstances not related to the product, such as lightning, water leakage, fire, friction, storage in extreme temperatures, weather conditions, solvents, corrosive product, incorrect utilization or neglect.

EU Compliance
Hereby, SMS Evoko Group AB, declares that Delo connection manager ECM1001EU/UK/US is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is availiabe at the following internet address: meetevoko.com/downloads/

Recycling
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

Type approval label
The label can be found on the bottom side of the device.