atomi Power Pad Qi 30W Wireless Charge Pad User Manual
- June 9, 2024
- atomi
Table of Contents
atomi Power Pad Qi 30W Wireless Charge Pad User Manual
Introduction
Thank you for purchasing the atomi Power Pad Qi
The atomi Power Pad Qi is optimized to work with iPhone® 8, iPhone® 8 Plus and
iPhone® X, but it also charges any devices with Qi wireless charging.
Featuring Qi charging technology, you can charge up to three Qi suppoed
devices quickly and wirelessly at the same time.
NOTE: If a device is not Qi compatible, you will need a Qi receiver to charge the device.
Safety Information
Taking care of your Power Pad Qi will protect your warranty coverage. Here is how to properly care for your atomi Power Pad Qi:
- Keep it dry—any moisture, including humidity, can corrode electronic circuits.
- Do not use your Power Pad Qi if it gets wet. Wait until it dries.
- If the Power Pad Qi is damaged in any way, do not use it.
- Keep it free from dust—dust can damage pats and electronic components.
- Do not store in cold temperatures as moisture can form inside the pad when it warms up to room temperature/charge.
- Do not modify the Power Pad Qi in any way.
- Never drop, knock or shake the Power Pad Qi. This could break internal circuit boards and mechanics.
- Always clean your pad with a sot, clean dry cloth.
What’s Inside
- Power Pad Qi
- 5ft power supply
- User guide
Specifications
- Input: 9V 3.5A
- Output A: 5V1A, 9V 1A
- Output B: 5V1A, 9V 1A
- Output C : 5V1A, 9V 1A Each charging pad provides 10W of power
Compatible with any Qi-enabled device
The Power Pad Qi can provide a charge to any device with integrated Qi
functionality, including the iPhone® 11/11 Pro/11 Pro Max, iPhone® XS, iPhone®
XS Max, iPhone® XR, iPhone® X, iPhone® 8, 8 Plus, Galaxy® S10e/S10/S10+,
Galaxy® S9/S9+, Galaxy® S8/S8+, Galaxy® Note10/10+, Galaxy® Note9, Galaxy®
Note8, LG® G8 ThinQ™, LG® G7 ThinQ, LG® V30 Thin Q.
Watches are not recommended to be charged on this item as the charger may get hot and damage the watch.
Charging Your Wireless Device
-
Connect the power supply to the wall outlet and to the charging base.
-
Place the devices on the center of your Power Pad Qi. Make sure the device is aligned over the center of the charging base. Charging will begin on contact.
Indicator lights and what they mean
- Blue light: Your device is charging.
- Green light: Your device is fully charged and is in standby mode
NOTE: For iOS devices, the green light indicating a full charge will not turn on.
Attention
Pats of the Power Pad Qi are magnetized. Do not put credit cards or other magnetic storage devices near the Power Pad Qi as information may be erased. Caution: If you have an implanted medical device, including pacemaker, implanted cardioveter defibrillator, etc., you should:
- Keep the Power Pad Qi more than 6 inches away from the medical device.
- Unplug the Power Pad Qi if you think it is intetering with your medical device.
- Follow the directions that came with your medical device.
For questions or concerns, email us at [email protected] Manufactured and marketed by Atomi, Inc. 10 West 33rd St., New York, NY 10001 atomi™ is a trademark of Atomi, Inc. Designed by atomi in New York. Made in China One-year limited warranty from date of purchase against defects in material and workmanship
/atomismatinc
/atomi_smat
@atomi.smat
Support
Call 1-800-757-1440
Mon-Fri 9:00 a.m. – 5:00 p.m. EST (U.S.) or email us at
[email protected]