HONOR FLA-B19 Smart Bracelet User Guide

: June 9, 2024
: Honor

Table of Contents

FLA-B19 Smart Bracelet
Blasting Caps and Areas
Operation and safety
Disposal and recycling information
FCC Regulatory Compliance
FCC statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FLA-B19 Smart Bracelet
User Guide

FLA-B19 Smart Bracelet

HONOR FLA-B19 Smart Bracelet - fig 1

Before using the device, review and download the latest Quick Start Guide at https://www.hihonor.com/global/support/.
Please go to Settings > About > Regulatory Information on the device to view the E-label screen.
Downloading app
Scan the QR code to download and install the app for managing the device.

https://appmarket-gw-dre.hispace.hihonorcloud.com/honorhealth/appdownload

Blasting Caps and Areas

Turn off your mobile phone or wireless device when in a blasting area or in areas posted turn off “two-way radios” or
“electronic devices” to avoid interfering with blasting operations.
Areas with flammables and explosives
Do not use the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for
example). Using your device in these environments increases the risk of explosion or fire. In addition, follow the
instructions indicated in text or symbols. Do not store or transport the device in containers with flammable liquids,
gases, or explosives.

Operation and safety

Ideal temperatures are -20°C to +45°C.
Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators. Do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects into it, submerge it in liquids, or expose it to external force or pressure, as this may cause it to leak, overheat, catch fire, or even explode.
The device has a built-in, non-removable battery, do not attempt to remove the battery, otherwise the device may be damaged.
When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible.
Please consult your doctor and the device manufacturer to determine if operation of your device may interfere with the operation of your medical device.
This product is not designed to be a medical device, and is not intended to diagnose, treat, cure or prevent any disease. All data and measurements should be used for personal reference only.
If you experience skin discomfort when wearing the device, take it off and consult a doctor.
Wipe the charging port dry before charging.

Disposal and recycling information

The symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection points designated by local authorities at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials and protects human health and the
environment. For more information, please contact your local authorities, retailer, or household waste disposal service or visit the website https://www.hihonor.com/.
EU regulatory conformance
Hereby, Honor Device Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
The full text of the EU declaration of conformity and most recent information about accessories & software are available at the following internet address: https://www.hihonor.com/global/legal/certification/.
RF exposure requirements
Your device is a low-power radio transmitter and receiver. As recommended by international guidelines, the device is designed not to exceed the limits established by the European Commission for exposure to radio waves.

FCC Regulatory Compliance

RF exposure requirements
Important safety information regarding radio frequency (RF) radiation exposure: RF exposure guidelines require that the device should be used for wrist. Failure to observe this guideline may result in RF exposure exceeding limits.

FCC statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Any changes or modifications to this device not expressly approved by Honor Device Co., Ltd. for compliance could void the user’s authority to operate the equipment.