LG 49XS2E Digital Signage Monitor User Manual
- June 9, 2024
- LG
Table of Contents
49XS2E Digital Signage Monitor
OWNER’S MANUAL
LG Digital Signage
(MONITOR SIGNAGE)
Please read this manual carefully before operating your set and retain it for
future reference.
49XS2E 55XS2E
www.lg.com Copyright © 2018 LG Electronics Inc. All Rights Reserved.
ENGLISH
2
TABLE OF CONTENTS
SAFETY PRECAUTION ………………3
– Precautions In Installing the Product…………………3 – Precautions to the AC
Adapter and Electrical
Power …………………………………………………………………………..5 – Precautions In Moving the Product
……………………7 – Precautions In Using the Product ……………………….7 – Mounting on a
Wall…………………………………………………8
LICENSES …………………………………9
ASSEMBLY AND PREPARATION………………………. 10
– Optional Accessories…………………………………………….10 – Parts and
Buttons…………………………………………………11 – Portrait Layout……………………………………………………….12 –
Attaching and removing the LG
Logo Bracket …………………………………………………………..12 – Installing on a
Wall………………………………………………..14 – Safety and Precaution Guide for
Installation ……………………………………………………………….17
REMOTE CONTROL ……………….. 18
MAKING CONNECTIONS……….. 20
– Connecting to a PC……………………………………………….20 – External Device
Connection……………………………….20 – Connecting Multiple Monitors…………………………..22 – Using
the Input List ………………………………………………22
TROUBLESHOOTING……………… 23
PRODUCT SPECIFICATIONS…… 26
ENGLISH
3
WARNING: This equipment is compliant with Class A of CISPR 32. In a
residential environment this equipment may cause radio interference.
SAFETY PRECAUTION
Please read these safety precautions carefully before using the product.
WARNING
If you ignore the warning message, you may be seriously injured or there is a
possibility of accident or death.
CAUTION
If you ignore the caution message, you may be slightly injured or the product
may be damaged.
WARNING
· Indoor Use Only.
Precautions In Installing the Product
WARNING
· Keep away from heat sources like electrical heaters. – Electrical shock,
fire, malfunction, or deformation may occur.
· Keep the packing anti-moisture material or vinyl packing out of the reach of
children. – Anti-moisture material is harmful if swallowed. If swallowed by
mistake, force the patient to vomit and visit the nearest hospital.
Additionally, vinyl packing can cause suffocation. Keep it out of the reach of
children.
· Do not put heavy objects on the product or sit upon it. – If the product
collapses or is dropped, you may be injured. Children must pay particular
attention.
· Do not leave the power or signal cable unattended on the pathway. – The
passerby can trip or fall, which can cause electrical shock, fire, product
breakdown, or injury.
· Install the product in a neat and dry place. – Dust or moisture can cause
electrical shock, fire or product damage.
· If you can smell smoke or other odors or hear a strange sound unplug the
power cord and contact the service center. – If you continue to use without
taking proper measures, electrical shock or fire can occur.
· If you dropped the product or the case is broken, turn off the product and
unplug the power cord. – If you continue to use without taking proper
measures, electrical shock or fire can occur. Contact the service center.
· Do not drop an object on or apply impact to the product. Do not throw any
toys or objects on the product screen. – It can cause injury to human, problem
to product and damage the display.
ENGLISH
4
· Do not let the product fall or drop when connecting it with an external
device. – This may cause injury and/or damage to the product.
· When connecting it to a game device, keep a distance of four times the
diagonal measurement of the screen from the device. – If the product falls
because of the short cable, this may cause injury and/or damage to the
product.
· Leaving a fixed image on the screen for a long time may cause damage to the
screen and cause image burn-in. To use the product for a long period of time,
use a screen saver on the PC or utilize the residual image prevention function
on the product, and when the product is not used, turn off the power. Burn-in
and related problems are not covered by the warranty on this product.
· Do NOT install this product on a wall where there is high risk of exposure
to oil fumes or mist. – This may damage product and cause it to fall.
CAUTION
· Make sure the product ventilation holes are not blocked. Install the product
in a suitably wide place (more than 100 mm from the wall). – If you install
the product too close to the wall, it may be deformed or fire can break out
due to internal heat.
· Do not block the ventilation hole of the product by a tablecloth or curtain.
– The product can be deformed or fire can break out due to overheating inside
the product.
· Install the product on a flat and stable place that has no risk of dropping
the product. – If the product is dropped, you may be injured or the product
may be broken.
· Install the product where no EMI occurs. · Keep the product away from direct
sunlight.
– The product can be damaged. · If you install the product in a place that
does not meet the recommended conditions, this may cause serious damage
to the product’s picture quality, life cycle, and appearance. Please check
with LG or a qualified installer before installing. This caution applies to a
place where there is an abundance of fine dust or oil mist, chemical
substances are used, the temperature is very high or low, the humidity is very
high, or the product is likely to remain turned on for a long period of time
(airport and train station), failure to do so will invalidate the warranty. ·
Do not install the product in an area with poor ventilation (e.g.on a
bookshelf, in a closet) or outside and avoid placing on cushions or carpets. ·
In addition, do not install it where there are heating objects such as
lighting equipment.
ENGLISH
5
Precautions to the AC Adapter and Electrical Power
WARNING
· If water or any foreign substance goes inside the product (TV, monitor,
power cord, or AC adapter), disconnect the power cord immediately and contact
the service center. – Otherwise, this may cause a fire or electric shock due
to damage to the product.
· Do not touch the power plug or AC adapter with wet hands. If the pins of the
plug are wet or dusty, wipe and dry them before use. – Otherwise, this may
cause a fire or electric shock.
· Make sure to completely insert the power cord into the AC adapter. – If
loosely connected, the poor connection may cause a fire or electric shock.
· Be sure to use power cords and AC adapters provided or approved by LG
Electronics, Inc. – The use of non-approved products may cause a fire or
electric shock.
· When unplugging the power cord, always pull it by the plug. Do not bend the
power cord with excessive force. – The power line can be damaged, which may
cause electric shock or fire.
· Be careful not to step or place heavy objects (electronic appliances,
clothing, etc.) on the power cord or AC adapter. Be careful not to damage the
power cord or AC adapter with sharp objects. – Damaged power cords may cause a
fire or electric shock.
· Never disassemble, repair or modify the power cord or AC adapter. – This may
cause a fire or electric shock.
· Make sure to connect the power cable to the grounded current. – You may be
electrocuted or injured.
· Use the rated voltage only. – The product can be damaged, or you may be
electrocuted.
· In the presence of thunder and lightning, never touch the power cord and
signal cable because it can be very dangerous. – It can cause electric shock.
· Do not connect several extension cords, electrical appliances, or electrical
heaters to a single outlet. Use a power strip with a grounding terminal
designed for exclusive use with the computer. – A fire can break out due to
overheating.
ENGLISH
6
· Do not touch the power plug with wet hands. Additionally, if the cord pin is
wet or covered with dust, dry the power plug completely or wipe dust off. –
You may be electrocuted due to excess moisture.
· If you don’t intend to use the product for a long time, unplug the power
cable from the product. – Covering dust can cause a fire, or insulation
deterioration can cause electric leakage, electric shock or fire.
· Fix the power cable completely. – If the power cable is not fixed
completely, a fire can break out.
· Do not insert a conductor (like a metal chopstick) into one end of the power
cable while the other end is connected to the input terminal on the wall.
Additionally, do not touch the power cable right after plugging into the wall
input terminal. – You may be electrocuted.
· The appliance coupler is used as the disconnect device. · Please make sure
the device is installed near the wall outlet to which it is connected and that
the outlet is easily
accessible. · As long as this unit is connected to the AC wall outlet, it is
not disconnected from the AC power source even if the
unit is turned off.
CAUTION
· Be sure to keep the outlet, AC adapter, and pins of the power plug clean
from dust and etc. – This may cause a fire.
· Do not unplug the power cord while the product is in use. – Electrical shock
can damage the product.
· Use only the power cord supplied with the unit. If you use another power
cord, make sure that it is certified by the applicable national standards when
not provided by the supplier. If the power cable is faulty in any way, please
contact the manufacturer or the nearest authorized repair service provider for
a replacement.
ENGLISH
7
Precautions In Moving the Product
WARNING
· Make sure to turn off the product. – You may be electrocuted or the product
can be damaged.
· Make sure to remove all cables before moving the product. – You may be
electrocuted or the product can be damaged.
· Make sure the panel faces forward and hold it with both hands to move. If
you drop the product, the damaged product can cause electric shock or fire.
Contact an authorized the service center for repair.
· Make sure the product is turned off, unplugged, and all cables have been
removed. It may take 2 or more people to carry larger apparatus. Do not press
against or put stress on the front panel of the apparatus.
CAUTION
· Do not shock the product when moving it. – You may be electrocuted or the
product can be damaged.
· Do not dispose the product-packing box. Use it when you move.
Precautions In Using the Product
WARNING
· Do not disassemble, repair or modify the product at your own discretion. –
Fire or electric shock accident can occur. – Contact the service center for
check, calibration or repair.
· When the display is to be left unattended for an extended period of time,
unplug it from the wall outlet. · Keep the product away from water.
– Fire or electric shock accident can occur. · Do not shock or scratch the
front and sides of the screen with metallic objects.
– Otherwise, it may cause damage to the screen. · Avoid high temperatures and
humidity.
ENGLISH
8
CAUTION
· Do not put or store inflammable substances near the product. – There is a
danger of explosion or fire due to careless handling of the inflammable
substances.
· When cleaning the product, unplug the power cord and scrub gently with a
soft cloth to prevent scratching. Do not clean with a wet cloth or spray water
or other liquids directly onto the product. An electric shock may occur. (Do
not use chemicals such as benzene, paint thinners, or alcohol.)
· Take a rest from time to time to protect your vision. · Keep the product
clean at all times. · Take a comfortable and natural position when working
with a product to relax the muscles. · Take a regular break when working with
a product for a long time. · Do not press strongly upon the panel with a hand
or sharp object such as nail, pencil, or pen, or make a scratch on it. · Keep
the proper distance from the product.
– Your vision may be impaired if you look at the product too closely. · Set
the appropriate resolution and clock by referring to the User’s Guide.
– Your vision can be impaired. · Use authorized detergent only when cleaning
the product. (Do not use benzene, thinner, or alcohol.)
– Product can be deformed. · Do not expose to dripping or splashing and do not
place objects filled with liquids, such as vases, cups, etc. on or over
the apparatus (e.g. on shelves above the unit). · Batteries should not be
exposed to excessive heat. For example, keep away from direct sunlight, open
fireplace, and
electric heaters. · Do NOT place non-rechargeable batteries in charging
device. · Using headsets (earphones) for a long time or listening loudly can
cause damage to your hearing. · Spray water onto a soft cloth 2 to 4 times,
and use it to clean the front frame; wipe in one direction only. Too much
moisture may cause staining.
WATER
CHEMICALS
· Do not use products using high voltage around the Monitor. (e.g., a bug
zapper) – Monitor may have malfunction as its electrical shock.
Mounting on a Wall
· Do NOT install this product by yourself as you may injure yourself or cause
damage to product. Please contact service personnel authorised by
manufacturer.
ENGLISH
9
LICENSES
Supported licenses may differ by model. For more information of the licenses,
visit www.lg.com.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress
and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby
Vision IQ, Dolby Audio, Dolby Atmos, and the double-D symbol are trademarks of
Dolby Laboratories Licensing Corporation.
For DTS patents, see http://patents.dts.com. Manufactured under license from
DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together, DTS 2.0
Channel, DTS 2.0+Digital Out, DTS-HD, and DTS Virtual:X are registered
trademarks or trademarks of DTS, Inc. in the United States and/or other
countries. © DTS, Inc. All Rights Reserved.
ENGLISH
10
ASSEMBLY AND PREPARATION
CAUTION
· Always use genuine components to ensure safety and product performance. ·
The product warranty will not cover damage or injury caused by the use of
counterfeit components.
NOTE
· The accessories provided with your product may vary depending on the model
or region. · Product specifications or contents in this manual may be changed
without prior notice due to upgrade of product
functions. · SuperSign Software & Manual
– Downloading from the LG Electronics website. – Visit the LG Electronics
website (http://partner.lge.com) and download the latest software for your
model. · The warranty will not cover any damage caused by using the product in
an excessively dusty environment.
Optional Accessories
Without prior notice, optional accessories are subject to change to improve
the performance of the product, and new accessories may be added. The
illustrations in this manual may differ from the actual product and
accessories.
Wi-Fi Dongle kit
AN-WF500
Pixel sensor kit
KT-SP0
NOTE
· Optional accessories are available for some models. If necessary, please
purchase them separately. · Please turn off the power before connecting or
removing the Wi-Fi dongle kit. · Pixel sensor is sold separately. You can
obtain additional accessories from your local retail store.
ENGLISH
11
Parts and Buttons
The image may be different according to the model.
Screen Buttons Adjusts up and down. Moves left and right. Displays the current
signal and mode. Accesses the main menus, or saves your input and exits the
menus. Change the input signal. Turns the power on or off.
NOTE
· You can adjust the volume by using the remote control.
ENGLISH
12
Portrait Layout
When installing in a portrait layout, rotate the monitor clockwise 90 degrees
(when facing the screen).
Attaching and removing the LG Logo Bracket
Removing the LG Logo Bracket 1 Lay a clean cloth on the floor, and then put
the monitor on it with the screen face down. Using a screwdriver,
remove the screw that secures the LG Logo Bracket to the bottom rear of the
monitor.
LG Logo Bracket 2 After removing the screw, remove the LG Logo Bracket. When
re-attaching the LG Logo Bracket, repeat the process
in reverse order.
ENGLISH
13 Attaching the LG Logo Bracket on the left side 1 Lay a clean cloth on the
floor, and then put the monitor on it with the screen face down. Using a
screwdriver,
remove the screw that secures the LG Logo Bracket to the bottom rear of the
monitor.
2 After removing the screw, remove the LG Logo Bracket. Align with the hole on
the left side to attach the LG Logo Bracket with a screw.
14
Installing on a Wall
For proper ventilation, allow a clearance of 100 mm on each side and from the
wall. Detailed installation instructions are available from your dealer, see
the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
ENGLISH
100 mm
100 mm
100 mm 100 mm 100 mm
To install your monitor on a wall, attach a wall mounting bracket (optional
part) to the back of the monitor. Make sure that the wall mounting bracket is
securely fixed to the monitor and to the wall.
1 Use only screws and wall mounting brackets that conform to VESA standards. 2
Screws which are longer than standard length may damage the inside of the
monitor. 3 A non-VESA standard screw may damage the product and cause the
monitor to fall. LG Electronics is not liable for
any accidents related to the use of non-standard screws. 4 Please use VESA
standard as below. · 785 mm and above
- Fixing screws: Diameter 6.0 mm x Pitch 1.0 mm x Length 12 mm
785 mm
ENGLISH
15
CAUTION
· Disconnect the power cord before moving or installing the monitor to avoid
risk of electric shock. · If you install the monitor on a ceiling or slanted
wall, it may fall and result in injury. Use an authorized LG wall mount
and contact your local dealer or qualified personnel to assist with the
installation. · Do not over tighten the screws as this may damage the monitor
and void your warranty. · Use only screws and wall mounting brackets that meet
the VESA standard. Any damage or injuries caused by misuse
or use of improper accessories are not covered by the warranty. · To prevent
injury, this apparatus must be securely attached to the wall in accordance
with the installation instructions.
(This pertains only to Australia and New Zealand.)
NOTE
· The wall mount kit includes the installation guide and all necessary parts.
· The wall mounting bracket is optional. You can obtain additional accessories
from your local dealer. · The length of screws required may differ depending
on the wall mount. Be sure to use the correct length. · For more information,
please refer to the guide provided with the wall mount. Securing the monitor
to a wall (optional)
1 Insert and tighten the eyebolts, or brackets and bolts on the back of the
monitor. – If there are already bolts inserted in the eyebolts’ position,
remove the other bolts first.
2 Mount the wall brackets with the bolts to the wall. Match the location of
the wall bracket and the eyebolts on the rear of the monitor.
3 Connect the eyebolts and wall brackets tightly with a sturdy cord. Make sure
the securing cord is horizontal with the flat surface.
ENGLISH
16
WARNING
· If the monitor is not positioned in a sufficiently stable location, there is
a danger that it will fall. Many injuries, particularly to children, can be
avoided by taking simple precautions such as: – Using cabinets or stands
recommended by the manufacturer. – Only using furniture that can safely
support the monitor. – Ensuring the monitor is not overhanging the edge of the
supporting furniture. – Not placing the monitor on tall furniture (for
example, cupboards or bookcases) without anchoring both the furniture and the
monitor to a suitable support. – Not placing cloth or other materials between
the monitor and supporting furniture. – Educating children about the dangers
of climbing on furniture to reach the monitor or its controls.
CAUTION
· Make sure that children do not climb on or hang from the monitor.
NOTE
· Use a platform or cabinet that is large and strong enough to support the
monitor securely. · Brackets, bolts, and cords are sold separately. You can
obtain additional accessories from your local retail store. · The illustration
shows a general example of installation and may look different from the actual
product.
ENGLISH
17
Safety and Precaution Guide for Installation
Direct Sunlight · Make sure to keep sufficient space between the product and
the window glass. (100 mm or more) · Do not expose to direct sunlight for a
prolonged period. · Attach a film with UV-blocking properties to the window
glass.
– Protect the display with cloth or a box when storing the device after it has
been powered off. – This can prevent faults such as black spots, creases, and
yellowing.
Temperature · Make a cooling system for the enclosure so that the operating
temperature of the product can be maintained.
– 0 °C ~ 40 °C (without Direct Sunlight) – 0 °C ~ 30 °C (Direct Sunlight)
-
A >100 mm * B 30
A -
A >100 mm * B 30
A
B
B
ENGLISH
18
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully to use the monitor correctly. To
install batteries, open the battery cover, place batteries (1.5 V AAA)
matching and
terminals to the labels inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse. The
illustrations may differ from the actual accessories.
CAUTION
· Do not mix old and new batteries, as this may damage the remote control. ·
Be sure to point the remote control toward the remote control sensor on the
monitor. · Some features of the remote control may not be supported in certain
models.
(POWER) Turns the monitor on or off. Turns the monitor on. Turns the monitor
off. Adjusts the brightness of the picture to reduce
energy consumption. (INPUT) Selects the input mode. Used for viewing 3D
videos. Toggles between numerical and alphabetical.
Number and Alphabet buttons Enters numerical or alphabetical characters
depending upon the setting.
Deletes the entered numerical or alphabetical character. Volume Up/Down Button
Adjusts the volume.
Selects the Aspect Ratio mode. Automatically adjusts picture position and
minimizes image
instability (available for RGB input only). (MUTE) Mutes all sounds. Adjusts
the brightness of the display. function is not supported in this model.
ENGLISH
19
Selects the Picture Mode. (HOME) Activates the Launcher.
Enters the White Balance menu. (SETTINGS) Accesses the main menus or saves
your input and exit menus.
SuperSign menu key. Navigation Buttons Scrolls through menus or options.
Selects menus or options and confirms your input. (BACK) Allows you to move
back one step in the user interaction function.
Quit all OSD tasks and applications. Allows you to control various multimedia
devices to enjoy
multimedia simply by using the remote control through the SimpLink menu.
Selects the TILE Mode. When the Picture ID number matches the Set ID number,
you can control whichever monitor you want in multi-display format. USB Menu
Control Buttons Controls media playback.
ENGLISH
20
MAKING CONNECTIONS
You can connect various external devices to your monitor. Change the input
mode and select the external device you want to connect. For more information
about external device connections, see the user manual provided with each
device.
Connecting to a PC
Some of the cables are not provided. This monitor supports the Plug and Play
feature. Plug and Play: a feature that enables a PC to recognize devices
attached by the user without device configuration or
user intervention when powering up.
External Device Connection
Connect a HD receiver, DVD, or VCR player to the monitor and select an
appropriate input mode. Some of the cables are not provided. For the best
picture and sound quality, connecting external devices to your monitor using
HDMI cables is recommended.
ENGLISH
21
NOTE
· For the best image quality, using the monitor with HDMI connection is
recommended. · To comply with the standard specifications of the product, use
a shielded interface cable with a ferrite core, such as a
DVI-D cable. · If you turn the monitor on when the set is cold, the screen may
flicker. This is normal. · Sometimes red, green, or blue spots may appear on
the screen. This is normal. · Use a High Speed HDMI®/TM cable. · Use a
certified cable with the HDMI logo attached. If you do not use a certified
HDMI cable, the screen may not
display or a connection error may occur. · Recommended HDMI Cable Types
– High Speed HDMI®/TM Cable – High Speed HDMI®/TM Cable with Ethernet · If you
cannot hear any sound in HDMI mode please check your PC settings. Some PCs
require you to manually change the default audio output to HDMI. · If you want
to use HDMI-PC mode, you must set your PC/DTV to PC mode. · You may experience
compatibility issues if you use HDMI-PC mode. · Make sure the power cable is
disconnected. · If you connect a gaming device to the monitor, use the cable
provided with the gaming device. · It is recommended to use the speakers that
are provided as optional accessories. · High Speed HDMI®/TM cables transmit a
HD signal up to 1080p and higher.
CAUTION
· Connect the signal input cable and tighten it by turning the screws
clockwise. · Do not press the screen with your finger for a prolonged period
as this may result in temporary distortion on the
screen. · Avoid displaying static images on the screen for a long period of
time to prevent image burn. Use a screensaver if
possible. · A wireless communication device near your monitor can affect the
image.
22
Connecting Multiple Monitors
To use different products connected to each other, connect one end of the
signal input cable (DP Cable) to the DP Out connector of Monitor 1 and connect
the other end to the DP In connector of the other product.
ENGLISH
MONITOR 1
MONITOR 2
MONITOR 3
MONITOR 4
NOTE
· If you set the tile mode using DVI-D or HDMI, you will not be able to watch
HDCP-encrypted content. · If the signal cable between the product and your PC
is too long, make sure to use the Booster or optical cable. · DP Cable – Use a
DP cable that is certified to DP 1.1a standard or higher.
Using the Input List
(HOME) · HDMI1 HDMI2 DISPLAYPORT DVI-D
23
TROUBLESHOOTING
ENGLISH
No image is displayed.
Problem Is the product power cord connected? Does the “Invalid Format” message
appear?
Does the “No Signal” message appear?
Action
· Check if the power cord is correctly plugged into the power outlet. · The
signal from the PC (Graphics card) is out of the vertical or
horizontal frequency range of the product. Adjust the frequency range by
referring to the Specifications in this manual. · The signal cable between PC
and product is not connected. Check the signal cable. · Access the input menu
to check the input signal.
The Unknown Product message appears when the product is connected.
Problem Did you install the driver?
Action · Check if the Plug and Play function is supported by referring to the
graphics card user manual.
The screen image looks abnormal. Problem
Is the screen position wrong?
The screen is displayed abnormally.
Action
· Check if the graphics card resolution and frequency are supported by the
product. If the frequency is out of range, set to the recommended resolution
in the [Control Panel] [Display] [Setting] menu. (The settings may differ
depending on your operating system.)
· The proper input signal is not connected to the signal port. Connect the
signal cable that matches with the source input signal.
24
ENGLISH
After-image appears on the product.
Problem
After-image appears when the product is turned off.
Action
· If you use a fixed image for a long time, the pixels may be damaged. Use the
screen-saver function.
· When a dark image is displayed on the screen after an image with high
contrast (black and white or gray), this may cause image sticking. This is
normal for LCD screen products.
The audio function does not work.
No sound?
Problem
Sound is too dull. Sound is too low.
Action
· See if the audio cable is connected properly. · Adjust the volume. · See if
the sound is set properly. · Select the appropriate equalizer sound. · Adjust
the volume.
Screen color is abnormal.
Problem Screen has poor color resolution (16 colors).
Screen color is unstable or mono-colored.
Do black spots appear on the screen?
Action
· Set the number of colors to more than 24 bits (true color). Select [Control
Panel] [Display] [Settings] [Color Table] in Windows. (The settings may differ
depending on your operating system.)
· Check the connection status of the signal cable. Or, re-insert the PC
graphics card.
· Several pixels (red, green, blue, white, or black color) may appear on the
screen, which can be attributable to the unique characteristics of the LCD
panel. This is not a malfunction of the LCD.
The operation does not work normally.
Problem The power suddenly turned off.
Action
· Is the Timer set? · Check the power control settings. Power interrupted.
ENGLISH
25
CAUTION
· Image sticking does not occur when using constantly changing images but may
occur when using a fixed image for an extended period of time. Therefore, it
is recommended that you use the instructions below to decrease the likelihood
of image sticking occurring when using a fixed image. It is recommended that
you change the screen at least once every 12 hours at the very minimum; if
done more frequently, the prevention of image sticking is more effective.
Recommended operating conditions
1 Change the background and the character colors using the same time interval.
ID: UPM 123 PW: ****
ID: UPM 123 PW: ****
When changing colors, using complementary colors helps to prevent image sticking.
BM CF
Glass
BM
CF
CF
OC PI
LC
PI TFT Layers
Glass
BM CF
ITO or MoTi Pixel Layer
2 Change the image using the same time interval.
Make sure that the characters or images before changing the image remain in
the same location after changing the image.
What is image sticking?
When the LCD panel displays a static image for an extended period of time, it
can cause a voltage difference between the electrodes that operate the liquid
crystals. When the voltage difference between the electrodes builds up over
time, liquid crystals have a tendency to remain aligned in one direction.
During this process, a previously displayed image remains visible. This
phenomenon is referred to as image sticking.
ENGLISH
26
PRODUCT SPECIFICATIONS
The product specifications below may be changed without prior notice due to upgrade of product functions. ” ” refers to alternating current (AC), and ” ” refers to direct current (DC).
LCD screen
Screen type
Video signal
Maximum resolution
Recommended resolution
Horizontal frequency Vertical frequency Synchronization Input / Output ports
Thin Film Transistor (TFT) Liquid Crystal Display (LCD) Screen 1920 x 1080 @
60 Hz – This may not be supported on some OS or graphics card types. 1920 x
1080 @ 60 Hz – This may not be supported on some OS or graphics card types.
HDMI / DVI-D / DISPLAYPORT: 30 kHz to 83 kHz
HDMI / DVI-D / DISPLAYPORT: 56 Hz to 60 Hz
Digital
Embedded battery
Applied
27
ENGLISH
LCD screen Power
Pixel pitch Rated power Power consumption
Environmental Conditions
Operating Temperature
Operating Humidity Storage Temperature Storage Humidity Installation site Dimensions (Width x Height x Depth) / Weight
49XS2E
0.5593 mm (H) X 0.5593 mm (V) AC 100-240 V ~ 50/60 Hz 2.3 A
On Mode: 200 W (Typ.) Sleep Mode: 0.5 W Standby Mode: 0.5 W 0 °C to 45 °C
(Without Direct Sunlight) 0 °C to 35 °C (Direct Sunlight)
10 % to 80 % -20 °C to 60 °C
5 % to 85 %
Indoor
1092.8 mm x 626.4 mm x 83.5 mm / 20.2 kg
LCD screen Power
Pixel pitch Rated power Power consumption
Environmental Conditions
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Installation site
Dimensions (Width x Height x Depth) / Weight
55XS2E
0.630 mm (H) X 0.630 mm (V) AC 100-240 V ~ 50/60 Hz 2.6 A
On Mode: 240 W (Typ.) Sleep Mode: 0.5 W Standby Mode: 0.5 W 0 °C to 45 °C
(Without Direct Sunlight) 0 °C to 35 °C (Direct Sunlight)
10 % to 80 % -20 °C to 60 °C
5 % to 85 %
Indoor
1235.4 mm x 709.4 mm x 85.4 mm / 24.7 kg
28
ENGLISH
HDMI / DVI-D / DISPLAYPORT (PC) Support Mode
Resolution 800 x 600 1024 x 768 1280 x 720 1366 x 768 1280 x 1024 1680 x 1050 1920 x 1080
Horizontal frequency (kHz) 37.879 48.363 44.772 47.712 63.981 65.290 67.5
Vertical frequency (Hz) 60.317 60 59.855 60 60.02 59.954 60
HDMI / DISPLAYPORT (DTV) mode
Resolution 480/60p 576/50p 720/50p 720/60p 1080/50i 1080/60i 1080/50p 1080/60p
Horizontal frequency (kHz) 31.5 31.25 37.5 45 28.1 33.75 56.25 67.5
Vertical frequency (Hz) 60 50 50 60 50 60 50 60
NOTE
· PC resolutions available for the Input Label option in HDMI / DVI-D /
DISPLAYPORT input modes: 1280 x 720/60 Hz, 1920 x 1080/60 Hz; 480p, 720p, and
1080p DTV resolutions.
· Vertical frequency: The product display functions by the screen image
changing dozens of times every second like a fluorescent lamp. The vertical
frequency or refresh rate is the number of image displays per second. The unit
is Hz.
· Horizontal frequency: The horizontal interval is the time taken to display
one horizontal line. When 1 is divided by the horizontal interval, the number
of horizontal lines displayed every second can be tabulated as the horizontal
frequency. The unit is kHz.
Make sure to read the Safety Precautions before using the product.
The model and serial numbers of the SET are located on the back and one side
of the SET. Record it below should you ever need service.
MODEL SERIAL
Temporary noise is normal when powering ON or OFF this device.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>