SUNCO LIGHTING 33319 LED PL Hybrid Lamps Owner’s Manual
- June 9, 2024
- Sunco Lighting
Table of Contents
Item#:
33319
LED PL HYBRID LAMPS
TWO PIN-BASE REPLACEMENT LAMP FOR CFLS
FEATURES
Simple rewiring installation allows lamps to run on the main or use it with a
magnetic ballast as a plug and go.
DIRECT WIRE OR PLUG & GO™
- Exceptional efficacy
- Universal voltage using direct wire
- For use on 13w CFL GX23 2-pin magnetic ballasts* (See note on page 2.)
APPLICATION
Replaces CFL PL lamps with G23/2 Pin base frequently used in down lights and
sconces.
*Not suitable for use with emergency exits or lighting.
PERFORMANCE DATA
ELECTRICAL
Wattage| 6W
Voltage| 120-277V
Current| 55mA
LIGHTING PERFORMANCE
Lumens| 600
Lumens Per Watt (LPW)| 100
Color Temperature (CCT)| 3000K
Color Rendering (CRI)| 83
Beam Angle| 180°
Dimmable Lighting Control|
ENVIRONMENT
Operating Temperature| -4° ~ 113°F
Suitable Location| **
Ingress Protection Rating| IP20
Fixture Type| Open (See text in red on page 2)
LIFESPAN
Average Life (Hours)| 50,000
Warranty ( Years)| 5
COMPONENTS
LED Light Source| N/A
CONSTRUCTION**
Housing| Aluminum / PC
Lens| Frosted
Base / Power Supply| GX23 2 Pin / Plug in
Finish| White
QUALIFICATIONS
Published lumens on LED products are approximate and may vary slightly. * Specifications are subject to change without notice.
DIMENSIONS (Inches)
Length (MOL)| 7.1 ”
Width/Diameter (MOD)| 1.5”
Height| 0.8”
Weight (Lbs)| —
SUPPORTING DOCUMENTS (Grey = not available at this time.)
| Product Sheet | VIEW |
|---|---|
| Install Instructions | VIEW |
| PACKAGING | UPC | DIMENSIONS (LxWxH) | GROSS WEIGHT (Lbs) | |
|---|---|---|---|---|
| Master Carton Individual Box Country of Origin HS Tariff | 20 1 |
China
8539.50.0010| 10811768020769
811768020762| 17.7″ x 8.9″ x 6.7″
7.5″ x1.5″ x1″| 13.2
0.7
ORDERING
| ITEM# | DESCRIPTION | CASE |
|---|---|---|
| 33319 | LED 6WPL/HYBRID/30K/180°/FR/120-277V/GX23 2 PIN | 20 |
ADDITIONAL INFORMATION:
Family Item (s): 43319/4000K • 53319/5000K
*Note: If the CFL ballast does not operate the lamp, the ballast is
probably weak or failing and should be removed, and the socket re-wired for
line voltage per lamp installation instructions.
It was originally thought this lamp was suitable for totally enclosed
fixtures. After live aging and further evaluation, it has been determined
excessive heat may cause the lamp not to function properly. Therefore it is
not recommended to be used in totally enclosed fixtures.
Photos and drawings may not be to scale and are for general reference only.
Rev: 08/25/2022
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>