KRAMER VM-8UX Distribution Amplifier User Manual

VM-8UX Distribution Amplifier
User Manual USER MANUAL
MODEL: VM-8UX
12G SDI 1:8 DA

VM-8UX Distribution Amplifier

VM-8UX Quick Start Guide
This guide helps you install and use your VM-8UX for the first time. Go to www.krameray.corn/downloadsNM-8UX to download the latest user manual and check if firmware upgrades are available.
Scan for full manual

https://goo.gl/a5HgYk
Step 1: Check what’s in the box
VM-8UX 12G SDI 1:8 DA
4 Rubber feet
1 Power supply (5V DC) 2
1 Bracket set
1 Quick start guide
2 male BNC 750 terminators
Step 2: Get to know your VM-8UX

12G means a 2160p60 progressive video format and 6G means a 2160p30 progressive video format
2| HD 1.5/36 LED (Yellow)| Lights when the SDI signal is HD 1.5 or 3G
High Definition (HD) 1.5G means a 720p progressive or 1080i interlaced video format and 3G means 1080p progressive video format
3| SD LED (Red)| Lights when the SDI signal is SD
Standard Definition (SD) means an NTSC or PAL compatible video format, consisting of 4801 or 480p (for NTSC), or 576i or 576p (for PAL) of interlaced or progressive video format
4| LOCK LED (Green)| Lights when the VM-8UX has detected the input signal and was able to lock on that signal
5| ON LED (Green)| Lights when receiving power
6| OUT BNC connectors| Connect to the SDI acceptors (from 1 to 8)
OUT 1 + OUT 2, OUT 3 + OUT 4, OUT 5 + OUT 6 and OUT 7 + OUT 8 are paired outputs
7| INPUT BNC connector| Connect to the SDI source
8| 5V DC| +5V DC connector for powering the unit

Step 3: Install the VM-8UX
Install VM-8UX using one of the following methods:

• Attach the rubber feet and place the unit on a flat surface.

• Fasten a bracket (included) on each side of the unit and attach it to a flat surface. For more information go to www.krameray.com/downloadsNM-8UX.

• Mount the unit in a rack using an optional RK-T2B rack adapter.

Step 4: Connect the inputs and outputs
Always switch OFF the power on each device before connecting it to your VM- 8UX. For best results, we recommend that you always use Kramer high- performance cables to connect AV equipment to the VM-8UX.
For best results, when only one of the paired outputs (OUT 1 + OUT 2, OUT 3 + OUT 4, OUT 5 + OUT 6 and OUT 7 + OUT 8) is connected, cover its pair connector with a 750 terminator (supplied).
For example, if only OUT 1 is connected, cover OUT 2 with a terminator (the other outputs do not need to be covered).
Step 5: Connect the power
Connect the 5V DC power adapter to VM-8UX and plug it into the mains electricity.
Safety Instructions
Caution: There are no operator serviceable parts invite the unit
Warning: Use only the Kramer Electronics power supply that is provided with the unit.
Warning: Disconnect the power and unplug the unit from the wall Wore installing.
See www.KramerAV.com for updated safety information.

Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better!
Our 1,000-plus different models now appear in 14 groups that are clearly defined by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers; GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and GROUP 14: Collaboration.
Congratulations on purchasing your Kramer VM-8UX 12G SDI 1:8 DA, which is ideal for the following typical applications:

• SDI video production studios
• Broadcast studio and field SDI video production events
• Staging and rental deployments
• Medical facilities with highly reliable video deployments

Getting Started

We recommend that you:

• Unpack the equipment carefully and save the original box and packaging materials for possible future shipment
• Review the contents of this user manual

Go to www.kramerav.com/downloads/VM-8UX to check for up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate).
2.1 Achieving the Best Performance
To achieve the best performance:

• Use only good quality connection cables (we recommend Kramer high-performance, high-resolution cables) to avoid interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables)
• Do not secure the cables in tight bundles or roll the slack into tight coils
• Avoid interference from neighbouring electrical appliances that may adversely influence signal quality
• Position your VM-8UX away from moisture, excessive sunlight and dust

This equipment is to be used only inside a building. It may only be connected to other equipment that is installed inside a building.

2.2 Safety Instructions
Caution: There are no operator serviceable parts inside the unit
Warning: Use only the Kramer Electronics power supply that is provided with the unit
Warning: Disconnect the power and unplug the unit from the wall before installing
2.3 Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled. To comply with the WEEE Directive, Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at www.kramerav.com/support/recycling/.

Overview

The VM-8UX is a compact and high performance 1:8 4K distributor for standard broadcast-grade SDI signals up to 12G transmitted data rate. It auto-adapts to the data rate of the SDI input signal, equalizes and re-clocks the signal to improve transmitted signal reach, and distributes the signal to two identical SDI outputs.
In particular, the VM-8UX features:

• Reliable Connectivity – Coaxial broadcast-grade cables are reliably connected via lockable BNC connectors, preventing unintentional disconnection and resulting in fast and highly professional uncompressed SDI signal distribution deployments.

• Extended-reach – Input signal equalization and output signal reclocking to gain signal extension. Using Kramer high-quality coaxial SDI cables, supports extension of up to 80m (260ft) for 12G 4K signals.
  Reach depends on signal resolution, and quality of copper cable used. For further details, go to our website at www.kramerav.com/product/VM-8UX.
  Reach extension performance may vary while using non2212Kramer coaxial cables.

• SDI Signal Transmission – Auto-adapts to SDI, HD-SDI, 3G HD-SDI, 6G and 12G SDI compliant signals, supporting pass-through of standard embedded audio channels with ancillary ID and metadata information.

• Easy Installation and Maintenance – Compact Mega TOOLS™ fan-less enclosure for small footprint spaces and over-ceiling mounting, or side-by-side mounting of 2 units in a 1U rack space with the optional RK-T2B rack adapter. Status indicators for transmitted SDI data rate of input and output connected signals, and power indicator, for ease of maintenance and troubleshooting.

This section defines the VM-8UX.

12G means a 2160p60 progressive video format and 6G means a 2160p30 progressive video format
2| HD 1.513G LED (Yellow)| Lights when the SDI signal is HD 1.5 or 3G
High Definition (HD) 1.5G means a 720p progressive or 1080i interlaced video format and 3G means 1080p progressive video format
3| SD LED (Red)| Lights when the SDI signal is SD
Standard Definition (SD) means an NTSC or PAL compatible video format, consisting of 480i or 480p (for NTSC), or 576i or 576p (for PAL) of interlaced or progressive video format
4| LOCK LED (Green)| Lights when the VM-8UX has detected the input signal and was able to lock on that signal
5| ON LED (Green)| Lights when receiving power
6| OUT BNC connectors| Connect to the SDI acceptors (from 1 to 8)
OUT 1 + OUT 2, OUT 3 + OUT 4, OUT 5 + OUT 6 and OUT 7 + OUT 8 are paired outputs
7| INPUT BNC connector| Connect to the SDI source
8| 5V DC| +5V DC connector for powering the unit

Connecting the VM-8UX

Always switch off the power to each device before connecting it to your VM- 8UX. After connecting your VM-8UX, connect its power and then switch on the power to each device.
You do not have to connect all the inputs and outputs, connect only those that are required.

1. Connect an SDI video source (for example, a 12G SDI camera) to the INPUT BNC connector.

2. Connect up to eight video OUT BNC connectors to the appropriate HD-SDI video acceptors (for example, 12G SDI displays).
   For best results, when only one of the paired outputs (OUT 1 + OUT 2, OUT 3 + OUT 4, OUT 5 + OUT 6 and OUT 7 + OUT 8) is connected, cover its pair connector with a 75Ω terminator (supplied).
   For example, if only OUT 3 is connected, cover OUT 4 with a terminator (the other outputs do not need to be covered).

3. Connect the 5V DC power adapter to the power socket and connect the adapter to the mains electricity (not shown in Figure 2).

Technical Specifications

Input:| 1 SMPTE 259M (SD-SDI), 292M (I-ID-SDI), 344M (ED-SDI), 424M (3G HD- SDI), ST-2081 (6G-SDI) and ST-2082 (12G-SDI) compliant serial video, 750 on a BNC connector
---|---
Outputs:| 8 equalized and reclocked SMPTE 259M (SD-SDI), 292M (I-ID-SDI), 344M (ED-SDI), 424M (3G HD-SDI), ST-2081 (6G-SDI) and ST-2082 (12G-SDI), outputs 750 on BNC connectors
Cable Equalization Reach:| 12Gbps: Up to 80m (260ft)
3Gbps and 6Gbps: Up to 100m (330ft)
1.5Gbps: Up to 200m (660ft)
SD: Up to 300m (980ft)
Note: The specs apply when using Kramer cables.
Video:| Up to 4K@60Hz (4:2:2) 30bpp resolution 270Mbps to 12Gbps data rate
Maximum Output Level:| 800mVpp /750
Coupling:| AC
Standards Compliance| SMPTE 259M (SD-SDI), 292M (HD-SDI), 344M (ED-SDI), 424M (3G HD-SDI), ST-2081 (6G-SDI), ST-2082 (12G-SDI)
Power Consumption:| 5V DC, 400mA
Power Source:| 5.2V/4A
Enclosure:| Tool, aluminum type
Cooling:| Convection ventilation
Operating Temperature:| 0° to +40°C (32° to 104°F)
Storage Temperature:| -40° to +70°C (-40° to 158°F)
Humidity:| 10% to 90%, RHL non-condensing
Dimensions:| 18.75cm x 11.5cm x 2.54cm (7.4″ x 4.5″ x 1.0″) W, D, H.
Shipping Dimensions:| 34.5cm x 16.5cm x 5.2cm (13.6″ x 6.5″ x 2.05″) W, D, H
Weight:| 0.48kg (1.06Ibs) approx.
Shipping Weight:| 1.02kg (2.251bs) approx.
Included Accessories:| Power supply, mounting bracket, 2 male BNC 750 terminators
Options:| RK-T2B 19″ rack adapter
Specifications are subject to change without notice at www.krameray.com

LIMITED WARRANTY

The warranty obligations of Kramer Electronics for this product are limited to the terms set forth below:
What is Covered
This limited warranty covers defects in materials and workmanship in this product.
What is Not Covered
This limited warranty does not cover any damage. deterioration or malfunction resulting from any alteration, modification. improper or unreasonable use or maintenance. misuse. abuse. accident, neglect. exposure to excess moisture, fire, improper packing and shipping (such claims must be presented to the carrier), lightning, power surges. or other acts of nature. This limited warranty does not cover any damage. deterioration or malfunction resulting from the installation or removal of this product from any installation, any unauthorized tampering with this product. any repairs attempted by anyone unauthorized by Kramer Electronics to make such repairs. or any other cause which does not relate directly to a defect in materials and/or workmanship of this product. This limited warranty does not cover cartons. equipment enclosures. cables or accessories used in conjunction with this product.
Without limiting any other exclusion herein, Kramer Electronics does not warrant that the product covered hereby. including, without limitation. the technology and/or integrated circuit(s) included in the product. will not become obsolete or that such items are or will remain compatible with any other product or technology with which the product may be used.
How Long Does this Coverage Last
Seven years as of this printing: please check our Web site for the most current and accurate warranty information.
Who is Covered
Only the original purchaser of this product is covered under this limited warranty. This limited warranty is not transferable to subsequent purchasers or owners of this product.
What Kramer Electronics will do
Kramer Electronics will, at its sole option, provide one of the following three remedies to whatever extent it shall deem necessary to satisfy a proper claim under this limited warranty:

1. Elect to repair or facilitate the repair of any defective parts within a reasonable period of time, free of any charge for the necessary parts and labor to complete the repair and restore this product to its proper operating condition. Kramer Electronics will also pay the shipping costs necessary to return this product once the repair is complete.
2. Replace this product with a direct replacement or with a similar product deemed by Kramer Electronics to perform substantially the same function as the original product.
3. Issue a refund of the original purchase price less depreciation to be determined based on the age of the product at the time remedy is sought under this limited warranty.

What Kramer Electronics will not do Under This Limited Warranty
If this product is returned to Kramer Electronics or the authorized dealer from which it was purchased or any other party authorized to repair Kramer Electronics products. this product must be insured during shipment. with the insurance and shipping charges prepaid by you. If this product is returned uninsured, you assume all risks of loss or damage during shipment. Kramer Electronics will not be responsible for any costs related to the removal or re-installation of this product from or into any installation. Kramer Electronics will not be responsible for any costs related to any setting up this product. any adjustment of user controls or any programming required for a specific installation of this product.
How to Obtain a Remedy under this Limited Warranty
To obtain a remedy under this limited warranty, you must contact either the authorized Kramer Electronics reseller from whom you purchased this product or the Kramer Electronics office nearest you. For a list of authorized Kramer Electronics resellers and/or Kramer Electronics authorized service providers. please visit our web site at www.kramerelectronics.com or contact the Kramer Electronics office nearest you.
In order to pursue any remedy under this limited warranty, you must possess an original, dated receipt as proof of purchase from an authorized Kramer Electronics reseller. If this product is returned under this limited warranty, a retum authorization number, obtained from Kramer Electronics, will be required. You may also be directed to an authorized reseller or a person authorized by Kramer Electronics to repair the product.
If it is decided that this product should be returned directly to Kramer Electronics, this product should be properly packed, preferably in the original carton. for shipping. Cartons not bearing a return authorization number will be refused.
Limitation on Liability
THE MAXIMUM LIABILITY OF KRAMER ELECTRONICS UNDER THIS LIMITED WARRANTY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID FOR THE PRODUCT. TO THE MAXIMUM EXTENT PERMITTED BY LAW, KRAMER ELECTRONICS IS NOT RESPONSIBLE FOR DIRECT. SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY. Some countries, districts or states do not allow the exclusion or limitation of relief, special, incidental, consequential or indirect damages, or the limitation of liability to specified amounts, so the above limitations or exclusions may not apply to you.
Exclusive Remedy
TO THE MAXIMUM EXTENT PERMITTED BY LAW, THIS LIMITED WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED. TO THE MAXIMUM EXTENT PERMITTED BY LAW, KRAMER ELECTRONICS SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING. WITHOUT LIMITATION. WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF KRAMER ELECTRONICS CANNOT LAWFULLY DISCLAIM OR EXCLUDE IMPLIED WARRANTIES UNDER APPLICABLE LAW. THEN ALL IMPLIED WARRANTIES COVERING THIS PRODUCT, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY TO THIS PRODUCT AS PROVIDED UNDER APPICABLE LAW. IF ANY PRODUCT TO WHICH THIS LIMITED WARRANTY APPLIES IS A ‘CONSUMER PRODUCT UNDER THE MAGNUSON-MOSS WARRANTY ACT (15 U.S.C.A. §2301, ET SEQ.) OR OTHER APPICABLE LAW. THE FOREGOING DISCLAIMER OF IMPLIED WARRANTIES SHALL NOT APPLY TO YOU, AND ALL IMPLIED WARRANTIES ON THIS PRODUCT, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR THE PARTICULAR PURPOSE, SHALL APPLY AS PROVIDED UNDER APPLICABLE LAW.
Other Conditions
This limited warranty gives you specific legal rights, and you may have other rights which vary from country to country or state to state.
This limited warranty is void if (i) the label bearing the serial number of this product has been removed or defaced, (ii) the product is not distributed by Kramer Electronics or (iii) this product is not purchased from an authorized Kramer Electronics reseller. If you are unsure whether a reseller is an authorized Kramer Electronics reseller, please visit our Web site at www.kramerelectronics.com or contact a Kramer Electronics office from the list at the end of this document. Your rights under this limited warranty are not diminished if you do not complete and return the product registration form or complete and submit the online product registration form. Kramer Electronics thanks you for purchasing a Kramer Electronics product. We hope it will give you years of satisfaction.

SAFETY WARNING

Disconnect the unit from the power supply before opening and servicing
For the latest information on our products and a list of Kramer distributors, visit our Web site to find updates to this user manual.
We welcome your questions, comments, and feedback.

www.KramerAV.com
info@kramerel.com

References

• Kramer | Audio-Visual Solutions and Experiences
• Kramer | Audio-Visual Solutions and Experiences
• Application Diagrams - Kramer Electronics
• kramerav.com/product/VM-8UX

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>