THORLABS LPCFJT 3-Way Tee Joint Instructions
- June 9, 2024
- THORLABS
Table of Contents
THORLABS LPCFJT 3-Way Tee Joint
This leaflet details how to use the LPCFJT 3-Way Tee Joint when installing a Thorlabs Floor Mounted Curtain System. For the continuing safety of the operators of the equipment and for the protection of the equipment itself, the operator should take note of the Warnings, Cautions and Notes throughout this leaflet, and, where applicable, in any associated literature.
Parts Required
Other Parts Required but Not Included
Mounting Column, LPCFC7 or LPCFC8
Floor Mounting Base LPCFB12
Curtain Track
Fitting Instructions
Fitting the 3-Way Tee Joint
- Fit the strut on the tee joint (G) into the mounting column (LPCFC7 or LPCFC8, available separately) as shown in Fig. 1.2.
- Using the two M8 x 20 Bolts (B) and washers (C) supplied, securely fix the tee joint to the mounting column as shown below.
Fitting the Curtain Track – Option 1
Caution
Before starting to fit the curtain tracks, ensure that the mounting base has
been fitted to the mounting column as detailed in the instructions for the
mounting base.
- Insert the half joint plate (F) and joint plate (E) into the extrusion in the curtain track (available separately), one into each side of the tee joint, and slide to the required position as shown in Fig. 1.3.
- Using the six M6 x 16 countersunk bolts (A) provided, attach the tee joint (G) to the curtain track.
- Before hanging the curtains to the track, ensure that the floor mounting base is securely fixed to the floor as detailed in the associated instructions for the mounting base.
Fitting the Curtain Track – Option 2
Caution
Before starting to fit the curtain tracks, ensure that the mounting base has
been fitted to the mounting column as detailed in the instructions for the
mounting base.
- Insert the two spring pins (D) into the joint as shown below. Push in each pin up to the indent mark, such that about half its length is protruding.
- Insert the half joint plate (F) and joint plate (E) into the extrusion in the curtain track (available separately), one into each side of the tee joint, and slide to the required position as shown in Fig. 1.4.
- Using the six M6 x 16 countersunk bolts (A) provided, attach the tee joint (G) to the curtain track.
- Before hanging the curtains to the track, ensure that the floor mounting base is securely fixed to the floor as detailed in the associated instructions for the mounting base.
Thorlabs Worldwide Contacts
For technical support or sales inquiries, please visit us at
www.thorlabs.com/contact for our most up-to-
date contact information.
USA, Canada, and South America
Thorlabs, Inc.
sales@thorlabs.com
techsupport@thorlabs.com
Europe
Thorlabs GmbH
europe@thorlabs.com
France
Thorlabs SAS
sales.fr@thorlabs.com
Japan
Thorlabs Japan Inc.
sales@thorlabs.jp
UK and Ireland
Thorlabs Ltd.
sales@uk.thorlabs.com
techsupport.uk@thorlabs.com
Scandinavia
Thorlabs Sweden AB
scandinavia@thorlabs.com
Brazil
Thorlabs Vendas de Fotônicos Ltda.
brasil@thorlabs.com
China
Thorlabs China
chinasales@thorlabs.com
References
- Thorlabs, Inc. - Your Source for Fiber Optics, Laser Diodes, Optical Instrumentation and Polarization Measurement & Control
- Thorlabs, Inc. - Your Source for Fiber Optics, Laser Diodes, Optical Instrumentation and Polarization Measurement & Control
- Thorlabs, Inc. - Your Source for Fiber Optics, Laser Diodes, Optical Instrumentation and Polarization Measurement & Control