SONY CFI-ZCP1 DualSense Edge Wireless Controller for PS5 Instruction Manual

June 9, 2024
Sony

SONY CFI-ZCP1 DualSense Edge Wireless Controller for PS5

Health and Safety

Before using the product, carefully read this manual and any manuals for compatible hardware. Retain instructions for future use. Parents or guardians of children should read this manual for safe use. This product has been designed with the highest concern for safety. However, any electrical device, if used improperly, has the potential for causing fire, electrical shock or personal injury. Observe all warnings, precautions and instructions. Stop use and disconnect cables immediately if the product functions in an abnormal manner, produces unusual sounds or smells or becomes too hot to touch.

WARNING RADIO WAVES

Radio waves may affect electronic equipment or medical devices (for example, pacemakers), which may cause malfunctions and possible injuries.

  • If you use a pacemaker or other medical device, consult your doctor or the manufacturer of your medical device before using the wireless networking feature (Bluetooth® and wireless LAN).
  • Do not use the wireless networking feature in the following locations:
  • Areas where wireless network use is prohibited, such as in hospitals. Abide by medical institution regulations when using the console on their premises.
  • Areas near fire alarms, automatic doors and other types of automated equipment.

MAGNETS AND MEDICAL DEVICES

This product has magnets which may interfere with pacemakers, defibrillators and programmable shunt valves or other medical devices. Do not place this product close to such medical devices or persons who use such medical devices. Consult your doctor before using this product if you use such medical devices.

VOLUME LEVEL

Permanent hearing loss may occur if the headset or headphones are used at high volume. Set the volume to a safe level. Over time, increasingly loud audio may start to sound normal but can actually be damaging your hearing. If you experience ringing or any discomfort in your ears or muffled speech, stop listening and have your hearing checked. The louder the volume, the sooner your hearing could be affected. To protect your hearing:

  • Limit the amount of time you use the headset or headphones at high volume.
  • Avoid raising the volume to block out noisy surroundings.
  • Lower the volume if you can’t hear people speaking near you.

LITHIUM-ION BATTERY

The controller contains a lithium-ion rechargeable battery. Do not handle damaged or leaking lithium-ion batteries. If the built-in battery fluid leaks, stop using the product immediately and contact the appropriate PlayStation customer service helpline which can be found within the accompanying documentation. If the material gets into the eyes, do not rub. Immediately flush the eyes with clean water and seek medical attention. If the material comes into contact with the skin or clothes, immediately rinse the affected area with clean water and consult your doctor. Do not allow the battery to come into contact with fire or subject it to extreme temperatures such as in direct sunlight, in a vehicle exposed to the sun or near a heat source. Never attempt to open, crush, heat or set fire to the controller or the battery. Do not leave the battery charging for a prolonged period of time when the controller is not in use.

YOUNG CHILDREN INJURIES

CHOKING HAZARD – Small parts. Keep the product out of the reach of young children. Young children may swallow small parts, may wrap the cables around themselves, which may inflict injury or cause an accident or a malfunction. NEVER DISASSEMBLE OR MODIFY THE PRODUCT OR ACCESSORIES UNLESS AUTHORISED IN THIS MANUAL There is a risk of fire, electric shock or injury.

Precautions

Taking breaks

  • Avoid prolonged continuous use of this product. Generally we recommend that you take 15 minute breaks for every hour of play.

  • Avoid playing when you are tired or need sleep.

  • Stop using the product immediately if you begin to feel
    tired or if you experience discomfort or pain in your hands or arms while operating the controller. If the condition persists, consult a doctor.

  • If you experience any of the following health problems, discontinue use of the product immediately. If symptoms persist, consult a doctor.

  • Dizziness, nausea, fatigue or symptoms similar to motion sickness

  • Discomfort or pain in a part of the body, such as eyes, ears, hands or arms

Vibration function

  • f the controller is sitting on a flat surface, the vibration of the controller during gameplay may cause it to fall, leading to injury or malfunction.
  • Do not use the vibration or trigger effect function if you have any ailment or injury to the bones, joints or muscles of your hands or arms. If you have an ailment or an injury, do not play titles with these features using the controller unless you have set those functions to “Off”. To enable or disable the features, select Settings > Accessories from the home screen of the PlayStation®5 console.

Static shock
When using the headset or headphones in particularly dry air conditions, you may sometimes experience a small and quick (static) shock on your ears. This is a result of static electricity accumulated in the body, and is not a malfunction of your headset or headphones. This effect could be reduced by wearing clothes made from materials that do not easily generate static shock.

Motion sensor
When using the motion sensor function of the controller be cautious of the following points. If the controller hits a person or object, it may cause accidental injury or damage.

  • Before using the motion sensor function, make sure you have enough space to move around.
  • Firmly grip the controller to prevent it from slipping out of your grasp and causing damage or injury.
  • If using a controller that is connected to the PS5 console with a USB cable, make sure there is enough space for the cable so that the cable will not hit a person or object.

Light bar

Do not stare at the light bar on the controller when it is blinking. Stop using the controller immediately if you experience any discomfort or pain.

Liquid, dust, smoke, steam and heat

  • Always ensure the product and its connectors are free of liquid, excess dust and small particles.
  • Do not leave the product in the following areas during use, storage or transportation.
  • Areas exposed to smoke or steam
  • Areas with high humidity, dust or cigarette smoke
  • Areas near heating appliances, areas exposed to direct sunlight or areas that retain heat

Set up and handling

  • Do not use the cables if they are damaged or modified.
  • Do not place heavy items on the product or cables, throw or drop the product, or otherwise expose it to strong physical impact.
  • Do not place the product on surfaces that are unstable, tilted or subject to vibration.
  • Do not leave the product on the floor.
  • Do not walk on the cables or pinch them, particularly near to the connectors.
  • Do not pull or bend the cables with excessive force.
  • Do not place the console and connected accessories on the floor or in a place where they may cause someone to trip or stumble.
  • Do not touch the connectors or insert any foreign objects into them or the product.
  • Unplug the cables if you want to clean or move the product or do not intend to use it for an extended period of time.
  • Do not touch the product during an electrical storm.
  • Do not expose the product, accessories or battery to high temperatures, high humidity, or direct sunlight during operation, transportation, and storage.

DualSense Edge Wireless Controller features

SONY-CFI-ZCP1-DualSense-Edge-Wireless-Controller-for-
PS5-FIG-2SONY-CFI-ZCP1
-DualSense-Edge-Wireless-Controller-for-PS5-FIG-3

Product contents

SONY-CFI-ZCP1-DualSense-Edge-Wireless-Controller-for-
PS5-FIG-4

Part names

SONY-CFI-ZCP1-DualSense-Edge-Wireless-Controller-for-
PS5-FIG-5

  • A Directional buttons
  • B (create) button
  • C Light bar
  • D Touch pad/touch pad button
  • E Player indicator
  • F (options) button
  • G Action buttons button button button button
  • H Right stick/R3 button*
  • I Fn button
  • Use in combination with other buttons.
  • Fn button + action buttons: switch between profiles
  • Fn button + (options) button: customise a profile
  • Fn button + up/down button: adjust volume of headphones
  • n button + left/right button: adjust audio balance
  • J Speaker
  • K (PS) button
  • L Headset jack
  • M Microphone
  • N (mute) button
  • O Left stick/L3 button*
  • The stick caps are changeable

Part names

Top

  • A R1 button
  • B R2 button
  • C USB port
  • D L1 button
  • E L2 button

Rear

  • A R2 stop slider
  • B L2 stop slider
  • C Left back button slot*1
  • D Reset button*2
  • E RELEASE latch
  • F Right back button slot*1
  1. The back buttons are changeable ( page 13).
  2. If your controller is responding unexpectedly, try resetting your controller. Use a pin or similar tool (not included) to press the reset button. This will not reconfigure the controller or affect pairing and profile settings.

Carrying case

SONY-CFI-ZCP1-DualSense-Edge-Wireless-Controller-for-
PS5-FIG-16

Pair the controller

The first time you use the controller, you’ll need to pair it with your PS5™ console.

  1. Turn on your console.
  2. Connect the controller to your console using the included USB cable.
  3. Press the (PS) button.

The controller powers on. After the light bar blinks, the player indicator lights up.
When your controller has enough battery life, you can disconnect the USB cable and use your controller wirelessly.

Customise the controller

Change the stick cap
Switch out the stick caps with one of the different types included and find which best suits your playstyle.

Remove the caps
Pull the cap directly away from the controller.

Attach the caps
Press the cap down onto the stick until you hear a “click”.

Attach or remove the back button
The back buttons are changeable. Choose from the different back button types included to best suit your playstyle.

For more details on assigning functions to the back buttons, refer to the PS5 User’s Guide ( page 22).

Attach the half dome back button
Insert the half dome back button into a back button slot. The half dome back button is interchangeable.

Attach the lever back button
Insert the lever back button into the corresponding back button slot. The right and left lever back buttons are not interchangeable. Check which button is right (RB) and left (LB) before attaching them.

Remove the back button
Pull the back button inwards and towards the top of the controller. Then, in that position, lift it up from the slot.

Replace the stick module
If a stick doesn’t work properly or stops working, you can replace it with a new stick module for DualSense Edge Wireless Controller (sold separately). Left and right stick modules are interchangeable and can be attached to either side.

Caution

  • Replace the stick module out of the reach of young children, as there is a danger of it being mistakenly swallowed.
  • Take care not to catch your hands in the stick module’s lever or gaps in the controller, as this may cause injury.
  • When turning the controller on, make sure the front cover is securely attached.

Notices

  • Before attaching or removing the stick module, touch a nearby metal-grounded object to remove any static electricity from your body. Failure to do so may cause the stick module or controller to malfunction.
  • Do not touch the connectors on the stick module or inside the controller.
  1. Make sure the player indicator on the controller is off. If the player indicator is on, press and hold the (PS) button until it turns off.
  2. Disconnect the USB cable from the controller.
  3. Remove the front cover. Slide the RELEASE latch on the back of your controller to remove the cover.
  4. Raise the release lever.
  5. Remove the stick module, and attach a new stick module. Make sure that the stick module is positioned correctly, and then slide the module along the grooves of the controller.
  6. Lower the release lever.
  7. Attach the front cover. Align the raised parts of the cover with the notches on the controller, and then carefully push the cover into place.

Change the stroke of the L2/R2 buttons
You can adjust the stroke (trigger length/stop) of the L2/R2 buttons, which is how far you can push down the buttons. To adjust this, move the L2/R2 stop sliders on the back of your controller.

When the stop sliders are set to short or medium, trigger effects will not be available.

Set up a profile

You can save stick sensitivity, vibration strength, button assignments, and other controller settings as a profile.

  • ssign your favorite profiles to a shortcut to quickly switch between them during a game. Use the Fn button to switch profiles.
  • Assigned profiles are saved to your controller. Take your controller with you and play with your profile on any PS5 console.
  • To set up a profile, go to your PS5 home screen and select Settings Accessories > DualSense Edge wireless controller.

Use the controller with a wired connection

To use the controller with a wired connection, you first need to set the connection method. From the PS5 home screen, select Settings Accessories > Controller (General) > Communication Method, and then select
Use USB Cable.

Lock the USB cable to controller
You can lock the USB cable to the controller to stop the cable from detaching. Open the connector housing and place the USB cable inside so that the connector protrudes from the outside. Then, close the connector housing.

Once you connect the USB cable to the controller, use the connector housing’s slider to lock and unlock the USB cable to your controller.
The connector housing is compatible only with the included USB cable.

Charge the controller

While your PS5 console is on or in rest mode, connect the controller to your console using the included USB braided cable. When charging the controller in rest mode, the light bar on the controller slowly blinks orange. When charging is complete, the light bar turns off.

  • To charge the controller while in rest mode, you have to configure the settings. From the PS5 home screen, select Settings System > Power Saving > Features Available in Rest Mode > Supply Power to USB Ports, and then select a setting other than Off.
  • You can also charge the controller by connecting it to your computer or other USB device using a USB cable. Be sure to use a USB cable that complies with USB standards. You may not be able to charge your controller on some devices.

Charging the controller in the carrying case

SONY-CFI-ZCP1-DualSense-Edge-Wireless-Controller-for-
PS5-FIG-30

You can charge the controller while it is stored in the carrying case. Open the flap on the back of the case and connect the USB cable to the controller.

Use and handling

Never disassemble or modify the product or accessories unless authorised in this manual

Use the product and accessories according to the instructions in this manual. No authorisation for the analysis or modification of the product, or the analysis and use of its circuit configurations, is provided. Unauthorised modification of the product will void your manufacturer’s guarantee.

Handling the controller

  • Charge in an environment where the temperature range is between 10 °C and 30 °C. Charging may not be as effective when performed in other environments.
  • The battery has a limited lifespan. Battery duration will gradually decrease with repeated usage and age. Battery life also varies depending on the storage method, usage state, environment, and other factors.
  • When the controller is not used for an extended period of time, it is recommended that you fully charge it at least once a year in order to maintain battery functionality.
  • The product and its parts are made from metal and plastic materials. When disposing of the product, follow local regulations for the proper disposal of such materials.

Care and cleaning

Follow the precautions below to help prevent the product exterior from deteriorating or discolouring.

  • Do not apply volatile substances such as insecticide.
  • Do not allow rubber or vinyl materials to be in prolonged contact with the product.
  • Do not use thinner, benzine, or alcohol. Avoid using wipes, chemical cloths, and other products that contain such substances.

End of life product recycling
The product is made of many materials that may be recycled. The controller contains a lithium ion battery. Follow local regulations when disposing of the product.

Where you see either symbol on any of our electrical products, batteries or packaging, it indicates that the relevant electrical product or battery should not be disposed of as general household waste in the EU, UK, Turkey, or other countries with separate waste collection systems available. To ensure correct waste treatment, please dispose of them via an authorised collection facility, in accordance with any applicable laws or requirements. Waste electrical products and batteries may also be disposed of free of charge via retailers when buying a new product of the same type. Furthermore, within the UK and EU countries larger retailers may accept small waste electronic products free of charge. Please ask your local retailer if this service is available for the products you wish to dispose of. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste. This symbol may be used on batteries in combination with additional chemical symbols.The chemical symbol for lead (Pb) will appear if the battery contains more than 0.004% lead.
This product contains a battery which is permanently built-in for safety, performance or data integrity reasons. The battery should not need to be replaced during the lifetime of the product and should only be removed by skilled service personnel. To ensure the correct waste treatment of the battery, please dispose of this product as electrical waste.

Compliance information

This product has been manufactured by or on behalf of Sony Interactive Entertainment Inc., 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. Imported into the United Kingdom and distributed by: Sony Interactive Entertainment Europe Limited, 10 Great Marlborough Street, London, W1F 7LP, United Kingdom. Inquiries related to product compliance in the UK should be sent to the manufacturer’s authorised representative, Sony Europe B.V., The Heights, Brooklands, Weybridge, Surrey KT13 0XW, United Kingdom. Imported into Europe and distributed by (except the UK) Sony Interactive Entertainment Ireland Limited, 2nd Floor, 2/3 Rogers Lane, Dublin 2, Ireland. Inquiries related to product compliance in the EU should be sent to the manufacturer’s authorised representative, Sony Belgium, bijkantoor van Sony Europe B.V., Da Vincilaan 7-D1, 1930 Zaventem, Belgium.

For customers in the EU, UK and Turkey EU RE Directive “Informal DoC” statement

Hereby, Sony Interactive Entertainment Inc., declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For details, please access the following URL: https://compliance.sony.eu The frequencies used by the wireless networking feature of this product are the 2.4 GHz (Bluetooth®) range. Wireless frequency band and maximum output power: – Bluetooth® 2.4 GHz: less than 10mW.

UK RE Regulation “Informal DoC” statement

Hereby, Sony Interactive Entertainment Inc., declares that this product is in compliance with the relevant statutory requirements. For details, please access the following URL:  https://compliance.sony.co.uk The frequencies used by the wireless networking feature of this product are in the 2.4 GHz range. Wireless frequency band and maximum output power: – Proprietary 2.4 GHz: less than 10 mW.

Specifications

Design and specifications are subject to change without notice. The operating instructions may vary depending on which software version you use, whether the system software of your PS5 console, or the device software of the controller. The actual product may vary from the illustrations in this manual.

Controller

SONY-CFI-ZCP1-DualSense-Edge-Wireless-Controller-for-
PS5-FIG-31

Stick Module

SONY-CFI-ZCP1-DualSense-Edge-Wireless-Controller-for-
PS5-FIG-32

System and device software

  • The device software of the controller are licensed to you under the terms of a separate end user license agreement. For details, visit doc.dl.playstation.net/doc/ps5-eula/.
  • Always update the system software of your PS5 console and the device software of the controller to the latest version.

Copyright and trademarks

“” , “PlayStation”, “PS5”, “DualSense Edge” and “PlayStation Shapes Logo” are registered trademarks or trademarks of Sony Interactive Entertainment Inc. “SONY” and “” are registered trademarks or trademarks of Sony Group Corporation. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Interactive Entertainment Inc. is under license. Other trademarks and trade names are those of their respective owners. Information about open source software is available at doc.dl.playstation.net/doc/ps5-oss/. All other trademarks are the property of their respective owners.

Further information

About controller
Find tips and information on how to use the controller by visiting playstation.com/controller-help/.

User’s guide
Find out about everything your PS5 console can do. You can also find detailed information about your controller’s functions and how to configure settings.
From your PS5 console’s home screen, go to Settings User’s Guide, Health and Safety, and Other Information > User’s Guide.

Customer support website
Find online support information such as step-by-step troubleshooting and frequently asked questions by visiting playstation.com/help.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals