FORENEX FI589W (DC-DC) LED Driving Board Owner’s Manual

June 9, 2024
FORENEX

FORENEX FI589W (DC-DC) LED Driving Board

FORENEX-FI589W -DC-DC\)-LED-Driving-Board-PRODUCT

Model Number

  • FI589-A5S4P with LED connector W2
  • FI589B-5S4 P with LED connector W 1 & W4
  1. Document No: docfi589W-V10
  2. PCB Bare Board: PB58922-V11
  • Approved By: ………………………………..
  • Checked By: ………………………………..
  • Prepared By: ………………………………..

Revision histories

Rev. No. Date Substantial Changes
1.0 2017/2 First issue.
   
   
   
   
   
   

General Description

The front end of FI5 89 W series is a highly efficient DC/DC to provide a wide input of volt age range. The back end is a constant current LED driver which can drive a number of LEDs in series & parallel configurations.

Features

  • Wide input rang: DC 12V
  • Provide output Typ. 1.28 W.
  • Flexible digital(PWM) for dimming control.
  • The Soft start function minimizes inrush current while powering up.
  • Multiple LED Protections
    • LED Open Short protection
    • Over-current Limit protection
    • Over temperature protection
    • Over-voltage protection
    • Under voltage lockout (UVLO)
  • Low profile and lightweight: 88 mm(L) x 32 mm(W) x 9.2 mm(H).
  • RoHS Compliant.

Item| Symbol| Conditions| MIN.| TYP.| MAX.| Unit
---|---|---|---|---|---|---
Input Voltage| Vin| GND=0V| 11.5| 12| 30| V
LED Output Voltage per string| Vled| Vin = TYP.| 15.5| 16| –| V
LED Total Output Current| Iled|  | –| 80| –| mA
Backlight on/off| BL_EN| DC high| 1.5| –| 5| V
DC low| –| –| 0.8| V

Brightness Control

|

BL_PWM

| Frequency| 100| 300| 20k| Hz
PWM of duty| 1(dark)|  | 100(bright)| %
Amplitude| 1.5| –| 5| VIH
Operating Temperature| Top| Ha=80%RH| -30|  | 80| ℃
Storage Temperature| Tstg| Ha=90%RH| -40|  | 120| ℃

Pin Assignment

Input Connector ( W3 )

Connector: (JST-S6B-2.0mm) or compatible, side entry

Pin num| Description| I/O| Remark
Pin1| Vin| P|
Pin2| Vin| P|
Pin3| BL_EN| I| Note1
Pin4| BL_PWM| I|
Pin5| GND| P|
Pin6| GND| P|

_ Note1: _It is recommended on the start up sequence that the BL_EN signal comes after input voltage ( and LED backlight connection are established.

LED Backlight Connector ( W1 & W 4 ) for F I58 9 B series

Connector: (JST-S2B-2.0mm) or compatible, side entry

Pin num| Description| I/O| Remark
Pin1| LED Cathode (-)| P|
Pin2| LED Anode (+)| P| Vled

LED Backlight Connector W2 for FI58 9 A series

Connector: (JST-S6B-1.25mm) or compatible, side entry

Pin num| Description| I/O| Remark
Pin1| LED Anode(+)| P| Vled
Pin2| LED Anode(+)| P| Vled
Pin3| LED Anode(+)| P| Vled
Pin4| LED Cathode(-)| P|
Pin5| LED Cathode(-)| P|
Pin6| LED Cathode(-)| P|

Mechanical specification

FORENEX-FI589W -DC-DC\)-LED-Driving-Board-FIG-1

LED-DRIVER-FI589W

FIS89A-xSxP

FORENEX-FI589W -DC-DC\)-LED-Driving-Board-FIG-2

FIS89B-xSxP

FORENEX-FI589W -DC-DC\)-LED-Driving-Board-FIG-3

Forenex Technology Co., Ltd

  • 5F-2,No212, Sec.4, Wenxin Rd., North Dist, Taichung City 404, Taiwan(R.O.C.)
  • TEL: 886-4-22969886
  • FAX: 886-4-22969887

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals