NEBULA D2426111 Anker Capsule 3 Laser 1080p Smart Wi-Fi Mini Projector Installation Guide
- June 9, 2024
- NEBULA
Table of Contents
NEBULA D2426111 Anker Capsule 3 Laser 1080p Smart Wi-Fi Mini Projector
Troubleshooting
| Modules | Question/Issue | Answer |
|---|
Setup
|
How Do I Pair the Remote with Capsule 3 Laser?
|
1. During setup, press OK and the “-” volume button at the same time when instructed.
2. While pairing, point the remote at the infrared receiver. Go to Settings > Remotes & Accessories to search and pair.
Note: The distance between the remote and projector should not exceed 33 ft/ 10 m.
Setup
| How do I Upgrade the Firmware?|
Go to Settings> Device Preferences >About> System update > Check Updates.
Setup
| How Do I Pair Bluetooth Devices with Capsule 3 Laser?|
Go to Settings > Remotes & Accessories.
Setup
|
How Do I Connect External Speakers to Capsule 3 Laser?
| This projector can be connected to external sound output devices, including headphones and speakers; when connected to external speakers, the built-in speaker system is disabled.
To play sound through external sound devices:
1. Via AUX Cable
– Use a 3.5 mm audio cable or an adapter (not provided) to connect your external speaker.
– Connect the other end of the audio cable to the projector AUX port.
– You will hear audio from your external speaker.
2. Via Bluetooth
– Go to Settings > Remote & Accessories > Add accessory.
Note: When connected to speakers or headphones, the projector’s built-in speaker system is disabled.
Setup
| How Do I Zoom In/Out with Capsule 3 Laser?|
Go to Settings> Projector Settings > Image Correction > Zoom.
Setup
|
How Do I Switch to Bluetooth Speaker Mode on Capsule 3 Laser?
| You can use Capsule 3 Laser as a standalone Bluetooth speaker via the following two ways.
1. Press the Mode button on Capsule 3 Laser.
2. Go to Settings > Bluetooth Speaker Mode to switch projector modes. Then go to your phone’s Bluetooth settings to pair with Capsule 3 Laser.
Note: After connecting, the projector light will turn off for a brief time. When finished with Bluetooth Speaker Mode, press the back button on top of Capsule 3 Laser.
Setup
|
How Do I Play Movies From My USB with Capsule 3 Laser?
| To play from a USB storage device:
1. Download the File Manager app from Google Play.
2. Insert the USB storage device into the projector.
3. Select the music, videos, or photos from the USB drive that you want to play.
4. Open them with a multimedia player app. If you don’t have an app, download one from Google Play.
Note:
The maximum supported memory capacity of your USB storage device is 4TB.
Setup
|
How Do I Play Videos Without Wi-Fi?
| 1. Download videos to a USB drive.
2. Install the File Explorer app from the Google Play Store on Capsule 3 Laser.
3. Install a media player app.
4. Connect your USB drive that is in FAT32 format and play videos stored on the USB drive
Setup
|
What is Capsule 3 Laser’s Projection Distance?
| The distance between the projector and the projection surface must be a minimum of 1.06 m and a maximum of 3.18m. This ensures a projection image between 40 and 120″. For best results, set the projector between 1.6m and 2.65m away.
Screen Size Distance Between Projector Lens and Screen 40″ -1.06m
50″ -1.33m
60″ -1.6m
70″ -1.86m
80″ -2.13m
90″ -2.39m
100″ -2.65m
110″ -2.92m
120″ -3.18m
Projector Ports
|
What Should I Do If My HDMI Has No Signal?
| 1. Use a different HDMI cable.
2. Connect your projector with another device with your HDMI cable.
3. Disconnect from your projector and try connecting your device with your TV via HDMI.
4. Adjust the HDMI output resolution/Hz of the connected device to match your projector.
Projector Ports| What USB Drive Formats are Supported?|
FAT32
Projector Ports| What Ports Are On Capsule 3 Laser?|
USB-C / HDMI ARC/ AUX
Projector Ports
|
What DoI Do If My USB Device Isn’t Recognized?
| 1. Install the File Explorer app from the Google Play Store.
2. Make sure the USB drive has a FAT32 format.
3. Download an mp3 to the USB drive and connect it with Capsule 3 Laser to see if it plays.
4. Test another USB drive.
Others
| How do I Find the Capsule 3 Laser Serial Number?| 1. Go to Settings > Device Preferences >About> Status> Serial number.
2. Find the silver slicker on the package. It will begin with D2426xxxxx.
Others
| How Do I Find the Capsule 3 Laser
MAC Address?
|
Go to Settings > Device Preferences > About > Status > Device MAC Address.
Others
| How Do I Factory Reset Capsule 3
Laser?
|
Go to Settings> Device Preferences > Factory Reset.
| Modules | Question/Issue | Answer |
|---|
Others
| How Do I Restart Capsule 3 Laser?|
Go to Settings > Device Preferences > Restart.
Others
|
What Should I Do If My Projector Has No Sound?
| Try the following steps to see if they help:
1. Switch between various projection modes to see if your projector can play sound.
2. Hit the Volume Up button on top of your projector.
3. Restore the default settings of the projector. Go to Settings > Devices Preferences > Restart.
4. In Projection Mode, connect your projector to an external Bluetooth speaker. Go to Settings > Remotes & Accessories > Add Accessory.
Others
|
What Do I Do if Capsule 3 Laser Can’t Connect to Wi-Fi?
| 1. Place Capsule 3 Laser and your router within 16 ft/ 5 m of each other. Test if other devices can connect toWi-Fi.
2. Try a different Wi-Fi network or connect to your phone’s hotspot.
3. Try your router’s 2.4GHz and 5GHz settings.
4. Reset Capsule 3 Laser by going to Settings > Device Preferences > Factory Reset.
Others
| The Capsule 3 Laser Firmware Update Failed. What Do I Do?| 1. Try a stronger Wi-Fi network or your phone’s hotspot.
2. Contact our Support Team for assistance.
Mirror or Stream
|
How Do I Mirror or Stream Video From iOS Devices to Capsule 3 Laser?
| First, install Airscreen on your projector from the Google Play Store.
Once completed, follow these steps to mirror or stream video from your iOS device. Screen Mirroring From iPhone or iPad
1. Make sure that your iOS device and Capsule 3 Laser are on the same Wi-Fi network. Your phone’s hotspot is also OK.
2. Swipe to display the Control Center and tap the AirPlay icon.
3. Select Capsule 3 Laser as the device you want to cast to.
Mirror or Stream
|
How Do I Mirror or Stream Video From Android Devices to Capsule 3 Laser?
| Capsule 3 Laser supports Chromecast, so you can mirror or stream videos from your Android devices that
use Chromecast.
Note that Chromecast uses a Wi-Fi connection, not a Bluetooth connection.
Also note that copyrighted content CANNOT be mirrored or cast. If you want to watch Netflix, you can directly download it from Nebula Store onto your projector.
Mirror or Stream
|
How Do I Stream Video From a Windows 10 PC to Capsule 3 Laser?
| Use the Chrome browser to stream videos from a Windows 10 PC to your projector. Here’s how:
1. Make sure your Windows 10 PC and projector are connected to the same W-Fi network. You can use your phone’s hotspot.
2. Open Chrome on your Windows 10 PC. In the top right corner of Chrome, go to More > Cast.
3. Choose the device you want to watch content from, and then watch it on your projector.
Mirror or Stream
|
How Do I Mirror From a Windows 10 PC to Capsule 3 Laser?
| Use screen casting software to mirror from a Windows 10 PC to your projector. Here’s how:
1. Keep your Windows PC and Capsule 3 Laser connected to the same network.
2. Download screen casting software such as EZCast on your Windows PC and Capsule 3 Laser.
3. Open the screen casting software and click the Cast icon in the top right to cast to Capsule 3 Laser.
Display
|
How Do I Activate Capsule 3 Laser’s Autofocus?
|
1. Slightly move the projector or press and hold the autofocus button for 2 -3 seconds to trigger the autofocus.
2. To manually adjust, access Settings> Projector Settings> Focus Settings> Manual Focus Correction
and then press the “left” and “right” buttons during autofocus.
Display
|
How Do I Adjust the Brightness of Capsule 3 Laser?
|
1. Capsule 3 Laser will automatically switch to a lower brightness mode when it is not charged in order to save battery.
2. If you want a brighter image, go to Settings > Projector Settings > Brightness> Standard Mode or go to
Settings> Projector Settings > Brightness to manually adjust it.
Display
| How Do I Use Manual Keystone
Correction?
|
Activate Manual Keystone Correction and enter the mode. Adjust each point to achieve a perfect circle.
Display
|
How Do I Turn Off the Alert Prompt?
|
Go to Settings> Projecting Settings> Advanced Settings> Smart Solutions> Projectrion Angle Alert/ Slow Charging Alert/ Fine Tuning Alert
Charging
| How Do I Keep the Battery From Discharging Quickly?| 1. Set the brightness to 50%.
2. Select Battery Mode via Settings > Projector Settings> Image Mode > Battery Mode.
Charging
| My Projector Won’t Power On or Charge. What Do I Do?| 1. Try a different Power Delivery charger (at least 30W) and USB-C charging cable to recharge ii.
2. If the battery is fully depleted, charge the device for 15-30 mins to see if the power button light turns on.
Apps
|
How Do I Install Netflix on Nebula Capsule 3 Laser?
| 1. Go to the Google Play Store. Search for the Nebula Play app and install it on your projector.
2. Download Netflix.
3. Install File Explorer/File Manager from the Google Play Store.
4. Install the Netflix APK via File Explorer/File Manager. Go to Device > Local > Download.
5. Netflix is ready to use.
Note
Netflix will appear in the second position on the Nebula Play channel of home screen.
Apps
| How Do I Control Netflix on Nebula Capsule 3 Laser?| 1. Install Nebula Connect on your phone and connect with Capsule 3 Laser.
2. Select Mouse mode. Use one finger to move and click or two fingers to scroll.
App
|
How Do I Use Nebula Connect?
| Nebula Connect allows you to easily control your projector. Here’s how to use it:
1. Download Nebula Connect from the Google Play Store or the App Store on your phone.
2. Make sure your phone’s Bluetooth is on, turn on your Nebula projector, and then open Nebula Connect.
3. Select the Nebula projector you want to connect to your phone.
4. With Nebula Connect, slide to move, tap to confirm, and scroll with two fingers.
| Modules | Question/Issue | Answer |
|---|
App
|
I Can’t Connect to Nebula Connect. What Do I Do?
| Try the following steps to see if they help:
1. Uninstall Nebula Connect.
2. Update the Capsule 3 Laser firmware to the latest version. Go to Settings
Device Preferences > About > System update > Check Updates.
3. Go to your phone’s Bluetooth settings and remove your pairing with your projector.
4. Restart your phone.
5. Reinstall Nebula Connect and try connecting again.
App
|
Can I Sideload Android Apps to Capsule 3 Laser?
|
Yes, you can download more than 7,000 native apps from Google Play directly to Capsule 3 Laser. For apps not available on Google Play, download the APK file to a USB drive to install on Capsule 3 Laser. Make sure the File Explorer app is installed on Capsule 3 Laser so your USB drive is recognized.
App
|
What Do I Do If My App Crashes?
| 1. Try another Wi-Fi network and update the firmware.
2. Check if your time zone is accurate via Settings > Device Preferences > Date & Time.
3. Clear data via Settings> Apps > See all apps > (App Name)> Clear Data/ Clear Cache.
4. Reset Capsule 3 Laser via Settings > Device Preferences >About> Factory reset.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>