ezOutlet5 EZ-72b Single Outlet Remote Power IP Switch User Guide
- June 9, 2024
- ezOutlet5
Table of Contents
ezOutlet5 EZ-72b Single Outlet Remote Power IP Switch
ezDevice APP available from:
Introduction
Features
- Set scheduled outlet On / Off / Reset eg.: Schedule IP Cam, Wi-Fi AP, Router, etc to reset.
- Remotely turn outlet On / Off / Reset Managed thru APP, Cloud4UIS.com or device web interface.
- Set outlet to Auto Power Reset when ping fails. eg.: Reset unresponsive Wi-Fi AP, Router, IP cam, NAS or network device. F
Description
Function Button:
Press: 1x = toggle ‘Auto Reset’ / ‘Manual Control’ function.
2x = toggle Output On / Off.
Hold: 10sec = Reset to Factory Default.
LED Indicators
Internet LED (IN)| Off: No internet.
Blinking: Internet is currently unstable.
On: Internet is normal.
---|---
Cloud Link LED (CL)| Off: Not connected to Cloud4UIS.
Blinking: Connected to Cloud4UIS but not added to account.
On: Connected to Cloud4UIS and added to account.
Auto Reset LED (AR)| On: Auto Reset enabled.
Blinking: Manual control.
Output LED| Off: Outlet is OFF.
Blinking: Outlet is Resetting.
On: Outlet is ON.
IN| CL| AR| LED Status|
DESCRIPTION
---|---|---|---|---
| | | Both blinking until
Function Button is released.| Reset to Factory Default & remove device link to
cloud a/c (see Part 6)
| | | LEDs blinking in sequence.| Firmware Upgrading.
DO NOT Interrupt or Power Off!
Hardware Setup & Add to Cloud4UIS
Step 1: Power up ezOutlet5 & Install ezDevice APP
Step 2: Add ezOutlet5 to Cloud4UIS Account
via Wi-Fi
a. From APP, select [+] and model.
b. Select device S/N and setup SSID (2.4GHz only).|
OR
| via LAN
a. From APP, select [+] and model.
b. Select device S/N
---|---|---
Done! ezOutlet5 added to Cloud4UIS account.
NOTE:
a. Cloud Link LED will change from BLINKING to ON.
b.The first person to ‘Add’ the device becomes the ‘Owner’.
c. Each device can only have one ‘Owner’.
d. ‘Owner’ can ‘Share’ & set usage permission to other Cloud4UIS users.
Auto Reset Router when Ping Fails
- Reconnect Router’s power from wall to ezOutlet5. Allow router to reconnect to internet.
- Once ezOutlet5 reconnects to internet. Press Function Button 1x to enable Auto Reset function.
Done! ezOutlet5 will now Auto Reset router when ping fails.
How to Remove Device from Cloud
- Press & hold device’s Function Button for 10sec.
- Internet & Cloud Link LED will Blink.
- Release Function Button.
NOTE:
This action removes ‘Owner’ & all ‘Shared’ user’s from this device and resets
it to factory default.
Control ezOutlet5 thru Web User-Interface
Open a browser to ezOutlet5 Web User-Interface to manage and control it either
in LAN or WAN (port forwarding required).
To locate ezOutlet5 LAN IP either;
a) Check ezDevice APP > Network > LAN or Wi-Fi IP
or;
b) Check router’s DHCP table
Default Web User-Interface login;
Username : admin
Password: device’s_last_6_MAC (eg.: MAC=00-03-EA-A1-B2-C3,
Password=A1B2C3)