GIANT CR 2450 Ridedash Plus 2 Electric Bike Cycling Computer Display User Guide
- June 9, 2024
- GIANT
Table of Contents
GIANT CR 2450 Ride dash Plus 2 Electric Bike Cycling Computer Display User
Guide
CONTENTS
-
E-bike Display
-
Mount
-
Cable tie
TECHNICAL INFORMATION
Power supply: CR 2450
Weight: 43 g
Operating temperature: 10/25/60 °C (min/typ/max)
Storage temperature: 20/25/70 °C (min/typ/max)
ANT+: 2457MHz@ldBm nominal
Operation frequency
Bluetooth: 2402-2480MHz@l dBm nominal
IP rating: I PX6, I PX7
INSTALLATION
BUTTON FUNCTIONS
A Button
- One page backward
- Decrease value
Press and hold button:
- Turn device off
B Button
- Confirm input
- One menu level down
Press and hold button:
- Open and close menu
C Button
- One page forward – Increase value
Press and hold button:
- Reset training values
INITAL WAKE-UP
- Press B Button for 5s to Wake-Up.
- Press B Button to start searching for your E-Bike.
- Select your E-System to intiate the first connection. Your RIDEDASH PLUS 2 and your E-Bike will now automatically connect the next times.
- Set device and user settings.
- Enjoy your device and start your first ride!
Ensure your E-Bike is tunes and ANT+ interface is adver while RIDEDASH PLUS 2 is scanning for your E-Bike.
MENU OVERVIEW
- Hold B button when in ride mode.
- You have access to the main menu of RIDEDASH PLUS 2.
SETTING
- Choose Settings in main menu to set the device.
- Choose a setting (A and C button) you want to edit and press B button.
- Press C button to increase a value or to toggle through options. Press A button to decrease a value or toggle through options.
- Press B button to confirm the setting.
USER INTERFACE
WARRANTY
Giant warrants for the original owner of the RIDEDASH PLUS 2 (incl. mounting kit) to be free from defects in material and workmanship for the period of two years from the date of purchase. Please note: batteries are excluded from warranties. This warranty applies only when the RIDEDASH PLUS 2 is purchased new from an Authorized Giant Dealer.
Safety information
Read the safety information and the manual before putting the RIDEDASH PLUS 2 into operation! Improper use can cause damage of the component and/or injuries. Save the safety information and the manual for your future reference!
- Make sure not to be distracted by the RIDEDASH PLUS 2 during the ride! Do not be distracted by the display.
- Make sure not to loose control of the E-Bike when interacting with RIDEDASH PLUS 2.
- Do not use the RIDEDASH PLUS 2 as a handle to lift up your Bike! This can lead to irreparable damage of the component.
EU DECLARATION OF CONFORMITY
Hereby, Giant MFG. Co., Ltd. declares that the radio equipment RideDash Plus 2 is in compliance with RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU. The product, to which this declaration relates, is in conformity with the following additional standards :
ETSI EN 300 328 V2.2.2 (2019-07) EN 62479:2010 ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 301 489-17 V3.2.4 (2020-09) ETSI EN 300 440 V2.1.1(2017-03) EN 50663:2017 Final draft ETSI EN 301 489-3 V2.2.0 EN 62368-1:2014/A11:2017 (2021-11)
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications not expressly approved by the party respnsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Thoese limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/T V technician for help.
This equipment complies with radio frequency exposure limits set forth by the FCC for uncontrolled environment. This equipment should be installed and operated with a minimum distance of 5mm between the device and the user or bystanders. Activate Windows The device must not be co-located or operating in conjunction with any other antenna or transmitter.
- FCC ID: ZL7RDPL2
IC statement
CAN ICES-003(B)/NMB-003(B) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-003(B)/NMB-003(B)
UKCA statement
We, Giant MFG. Co., Ltd., declare that the equipment above has been tested in our facility and found compliance with the requirement limits of applicable standards, in accordance with the Radio Equipment Regulations 2017 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The test record, data evaluation and Equipment Under Test (EUT) configurations represented herein are true and accurate under the standards herein specified.
Correct disposal of this product
Applicable in the countries of the European Union and other European countries with a separate collection system). The marking on the product or on the accompanying literature indicates that after its service life it must not be disposed of together with normal household waste. Please dispose of this device separately from other waste in order to avoid harm to the environment or human health by uncontrolled garbage disposal. Recycle the device to promote the sustainable recycling of material resources. Private users should contact the shop where the product was purchased or the relevant authorities to find out how to recycle the device in an environmentally friendly manner. Activate Windo Commercial users should contact their supplier and consult the terms of the sales contract. This product must not be disposed of with other commercial waste.
WARNING
Do not ingest the battery, Chemical Burn Hazard. Keep new and used batteries
away from children. The product contains a lithium coin/button cell battery.
If the coin/button cell battery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death. If you think batteries might habe
been swallowed or placed inside any part of the body, seek immediate medical
attention. If the battery compartment does not close securely, stop using the
product and keep it away from children.
Symbol
Please visit official website for more language options.
Support
www.giant-bicycles.com
Giant and its symbol. are trademarks of Giant All rights resented.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>