Govee 386B6062A0 Glide Wall Light User Guide

Govee 386B6062A0 Glide Wall Light

Govee Glide Wall Light

Quick Start Guide

To Watch The Installation Video Tutorial

• Search “Govee Glide Wall Light” on Amazon or YouTube.

Caution

• Do not power on until you have assembled all segments.
• This product is ideally used on smooth surfaces (e.g. glass, wood, etc); not suitable for uneven, bumpy or wet surfaces (e.g. brick, stucco, etc).
• Keep the product away from water. If you need to clean it, please use a dry rag.
• Clean and ensure the surface is totally dry before sticking the product on.

In the Box

Before Installation

Step 1
Assemble the segments with the desired layout on a flat surface.

Step 2
Conn1e:et the input to the end seg.ment/corner p1iece,. Then connect the c,ontrol box to the p,ower adapter.

Step 3
Power on to check each get is working. Next, power off, disassemble the segments, and disconnect the control box

Step 4
Plan the appropriate installation location in advance. Determine the position of the outlet, it is recommended to place the control box and adapter close to the outlet.

Installation Steps

Step 1
Install! the segments·from the slide farthest away from the adapter. When installing, remove the protective film and push each segment firmly on the wan for at least 30 seconds.

Step2
After assembling all the segments, connect the input at the end of the control box wire to the end segment and finally to the power adapter.

To Disassemble

Pull to detach the segments and then remove the adhesive tape from the wall .

Model: H6062
Govee Glide Wall Light

Safety Instructions

Read and follow all the safety instructions:

• The wall light is not waterproof. Avoid exposing it to splashing or dripping water.
• The operating temperature should be within -1 0° to 40°C (14° to 104°F).
• The wall light internal light source cannot be replaced. If it breaks, you must replace with a new one.
• Do not allow children to install the wall light alone.
• Avoid placing the wall light near heat sources.
• Do not install the wall light with a dimming driver.
• Avoid placing the wall light near potentially dangerous sources (e.g., candles, liquid-filled objects).

Introduction

Thanks for choosing Govee Glide Wall Light. This product integrates creative patterns into your gaming room, living room, bedroom, etc., bringing flowing, vivid lighting into your life. At the same time, the cool dynamic lighting dances and jumps with the rhythm of the music. The combination of visual and audio experiences allows you to feel the joy brought by synchronized light and music.

What You Get

At a Glance

Note : Ensure the mic is facing up during use.

Pairing Your Device with the Govee Home APP

What You Need

• A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.
• A smartphone or tablet running iOS 8.0 (or above) or Android 4.3 (or above).

Pairing Instructions

1. Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
2. Open the app, tap the “+” icon in the top right corner and search for “H6062”.
3. Tap the device icon and follow the on-screen instructions to complete pairing:

Specifications

• Model H6062
• Adapter Input  AC 100 – 240V
• Lamp Input DC12V / 3A
• Lighti1ng Color RGBIC
• Control Method App, Voice Contro1I,
• Working Temperature -10°c to 40°(/14 °F to 104 gF

Troubleshooting

1. Cannot connect to the Govee Home app.
   • Check if the wall light is powered on.
   • Check if Bluetooth on the smartphone is enabled, or try connecting with another smartphone.
   • When connecting for the first time, ensure the smartphone is near the wall light.
   • If the connection error still exists, please delete the connected wall light from “My Device” on the app. Reconnect to the Govee Home app by following the instructions provided previously.
2. Wi-Fi disconnected or failed to connect.
   • Check if the wall light is powered on.
   • Do not skip the Wi-Fi connection steps during the wall light pairing process.
   • Ensure your Wi-Fi router is 2.4GHz (5GHz is not supported).
   • Ensure you entered the correct Wi-Fi password during the Wi-Fi set up process.
   • Try connecting the wall light with a smartphone hotspot to check if your home network is working properly.
   • Shorten the distance between the wall light and the Wi-Fi router to less than 1 m, then reconnect.
3. Cannot connect to Alexa or Google Assistant.
   • Ensure the Wi-Fi connection is stable and working properly.
   • Go to “User Guide” on the app Settings page to pair the wall light again.
4. Can multiple users control one wall light.
   • Each wall light can only be controlled by one account.
   • If multiple users want to manage the same wall light, ensure they all use the same account.

Customer Service

Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email : support@govee.com
Official Website : www.govee.com

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply With the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfur interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

FCC and IC Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Responsible party :
Name: GOVEE MOMENTS(US) TRADING LIMITED
Address : 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448
Email: support@govee.com
Contact information : https://www.govee.com/support
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced. Not intended for illumination. Only used for creating ambiance. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen lntellirocks Tech. Co., Ltd. is under license. Govee is a trademark of Shenzhen lntellirocks Tech. Co., Ltd. Copyright ©2021 Shenzhen lntellirocks Tech. Co., Ltd.
All Rigtits Reserved. For FAQs and more information, please visit: www.govee.com

LET’S CONNECT
Inspire & Be Inspired

• Share your creations on social media.
• Con11ect with our active Govee Community.
• Discover new ideas for using your products.

NEED HELP?
Contact us anytime!
Support@govee.com
Report an issue on the app
Rapid Replacement on the app

Join Govee Home
Download Govee Home App for new releases, user events, and more.

References

• Govee - Making Life Smarter
• Govee - Making Life Smarter

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>