MONOGRAM ZHU30RSPSS 30 Inch Smart Induction Cooktop Owner’s Manual
- June 9, 2024
- MONOGRAM
Table of Contents
MONOGRAM ZHU30RSPSS 30 Inch Smart Induction Cooktop
INSTRUCTION
GOURMET GUIDED COOKING
Elevate your culinary skills. Use the Hestan Cue™ pan included with your new
cooktop and this smart cooking system to create an array of chef-inspired
recipes—perfectly
GLIDE TOUCH CONTROLS
Easy-to-use electronic controls allow you to precisely raise or lower heat in
an instant with one easy swipe
FOUR INDUCTION COOKING ELEMENTS
Enjoy a new level of rapid, precise heating with a cool-to-the-touch surface
that’s easy to clean
11″ 3700W INDUCTION ELEMENT
Rapidly boil water with our most powerful induction element
SYNCBURNERS
Control two 7″ elements simultaneously to evenly heat large cookware
MELT SETTING
Gently melt delicate foods without burning or scorching
CONTROL LOCK CAPABILITY
Protects against unintended activation
CUSTOM SETTINGS
Personalize your cooktop settings to fit your cooking style
PAN PRESENCE & SIZE SENSORS
Cook efficiently with elements that heat to the size of your pan and shut off
when no pan is present
FLUSH-MOUNT CAPABLE
The optional accessory kit enables the cooktop to be flush inset into the
countertop for a sleek, modern look
PRECISION COOKING
Achieve restaurant quality results with an optional probe that wirelessly
controls the temperature of your food. Ideal for Sous Vide, Slow Cooking,
making candy, etc., or for any other cooking that requires precise control of
temperature over time.
SPECIFICATIONS
SPECIFICATIONS|
---|---
Overall Width| 29 3/4″ (75.6 cm)
Overall Depth| 20 7/8″ (53.0 cm)
Overall Height| 4 5/8″ (11.8 cm)
Cut-out Width| 28 1/2″ (72.4 cm)
Cut-out Depth| 19 5/8″ (49.9 cm)
Conduit Length| 48″ (122 cm)
Electrical Rating
| 7400W at 240V/60Hz
6400W at 208V/60Hz
Recommended Circuit Breaker Size|
40 Amps
Net Weight| 45 lbs. (20.4 kg)
Approx. Shipping Weight| 51 lbs. (23.1 kg)
SPECIFICATIONS|
Overall Width| 29 3/4″ (75.6 cm)
Overall Depth| 20 7/8″ (53.0 cm)
Overall Height| 4 5/8″ (11.8 cm)
Cut-out Width| 28 1/2″ (72.4 cm)
Cut-out Depth| 19 5/8″ (49.9 cm)
Conduit Length| 48″ (122 cm)
Electrical Rating
| 7400W at 240V/60Hz
6400W at 208V/60Hz
Recommended Circuit Breaker Size|
40 Amps
Net Weight| 45 lbs. (20.4 kg)
Approx. Shipping Weight| 51 lbs. (23.1 kg)
OPTIONAL ACCESSORIES
OPTIONAL ACCESSORIES
Precision Cooking Kit| JXPROBE1
Flush-Mount Kit| JXFLUSH1
Griddle| JXGRIDL1
ATTENTION ELECTRICIAN:
This cooktop is provided with a 48″ flexible conduit and must be hard wired
(direct wired) into an approved junction box and be properly grounded. It is
not permitted to use a “plug and receptacle” type installation on this
cooktop.
Use a two-wire, three conductors 208/240 VAC, 60 Hertz electrical system. A white (neutral) wire is not needed for this cooktop.
For more details refer to the installation instructions for this product.
OVERALL DIMENSIONS
Dimensions in parentheses are in centimeters unless otherwise noted. Actual product dimensions may vary due to manufacturing tolerances.
INSTALLATION
COUNTERTOP CUT-OUT DIMENSIONS
ADA INSTALLATION
Dimensions in parentheses are in centimeters unless otherwise noted.
HELPFUL TIPS
-
A Wall coverings, countertop, and cabinets surrounding the cooktop must be able to withstand temperatures of up to 200ºF.
-
B Minimum 30″ clearance from countertop to unprotected overhead surfaces, when no ventilation hood or microwave oven is installed.
-
C When using a ventilation hood or microwave oven above the cooktop, see hood or microwave installation instructions for minimum overhead clearance dimensions.
-
D Minimum 15″ of clearance from countertop to nearest overhead surface on both sides of cooktop. Make sure to include any lighting rail covers in the calculation.
-
E Minimum 2″ distance from the edge of cutout to the nearest adjacent side wall below upper cabinets.
-
F Install an approved junction box where it can be easily reached through the front of the cabinet where the cooktop is located.
IMPORTANT: For serviceability, the junction box must be located where it will allow considerable slack in the 48″ long conduit. -
G Maximum 13″ depth of unprotected overhead surfaces, when no ventilation hood or microwave oven is installed.
-
H For Americans with Disabilities Act (ADA) forward approach installation: Minimum 5″ clearance between the top of the countertop and the enclosure. The enclosure must be made of at least 1/4″ thick wood material and must have an access panel installed in order to provide access to the junction box and hold-down brackets and to allow for service of the cooktop.
For more details refer to the installation instructions for this product.
INSTALLATION ABOVE WALL OVEN
INSTALLATION ABOVE WARMING DRAWER
For more details, refer to the installation instructions for this product on Monogram.com. Dimensions in parentheses are in centimeters unless otherwise noted.
HELPFUL TIPS
- A Note this cooktop is only approved for installation above specific wall ovens as labeled on this unit.
- B Warming drawers are approved for installation below only certain specified cooktop models. See the label attached to the top of the warming drawer or underside of the cooktop for approved combinations.
- C When installing this cooktop above a single wall oven, do not install the baffle.
- D Maintain a minimum distance of 31-1/4″ from the top surface of the countertop to the wall oven platform to ensure that the cooktop and wall oven do not interfere with each other (see picture).
- E The cooktop platform must be a minimum height of 4-3/4″ from the floor to ensure that the handle does not hit the floor when the door is opened.
- F Junction box location for wall oven (may also be located in adjacent cabinet).
- G Electrical connection for the cooktop must be located in an accessible adjacent location to the right (may also be located in an adjacent cabinet).
- H When installing the cooktop above a warming drawer, a solid barrier must be installed at least 5″ from the top of the countertop. Use any solid material such as 1/4″ thick plywood. Allow at least a 2″ air gap between the front of the barrier and the inside of the cabinet and at least a 1/4″ air gap between the barrier and the top of the warming drawer.
For more details refer to the installation instructions for this product
FLUSH MOUNT INSTALLATION
SECTION X–X
Through countertop showing the depth of rabbet for flush-mount
FLUSH-MOUNT INSTALLATION ABOVE WALL OVEN
FLUSH-MOUNT INSTALLATION ABOVE WARMING DRAWER
HELPFUL TIPS
- A Use the optional JXFLUSH1 kit to flush-mount the cooktop into the countertop. Read all installation instructions supplied with the cooktop and kit before beginning installation.
- B To avoid hot cookware from contacting the countertop surface, the cooktop should be installed at least 1/32″ higher than the countertop.
- C Use strips of wood or solid-surface countertop material to reinforce the countertop below the flush-mount rabbet. For an island or peninsular installation secure strips to all four sides, otherwise, just secure strips to the front and back under the cutout.
- D Note this cooktop is only approved for installation above specific wall ovens as labeled on this unit.
- E When installing this cooktop above a single wall oven, do not install the baffle.
- F When this cooktop is installed above a flush-mounted wall oven, the clearance from the front edge of the countertop to the front edge of the cooktop cutout is a minimum of 2-1/2″ plus the wall oven cleat setback.
- G The cooktop platform must be a minimum height of 4-3/4″ from the floor to ensure that the handle does not hit the floor when the door is opened.
- H Warming drawers are approved for installation below only certain specified cooktop models. See the label attached to the top of the warming drawer or underside of the cooktop for approved combinations.
- I When installing the cooktop above the warming drawer, a solid barrier must be installed at least 5-1/2″ from the top of the countertop. Use any solid material such as 1/4″ thick plywood. Allow at least a 1/4″ air gap between the barrier and the top of the warming drawer.
For more details refer to the installation instructions for this product.
For questions about your
appliance, please call 1-800-626-2000.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>