MONOGRAM ZHU36RSPSS 36 Inch Induction Cooktop User Manual
- June 9, 2024
- MONOGRAM
Table of Contents
MONOGRAM ZHU36RSPSS 36 Inch Induction Cooktop
MOUNING INSRUCTIONS
GOURMET GUIDED COOKING
Elevate your culinary skills. Use the Hestan Cue™ pan included with your new
cooktop and this smart cooking system to create an array of chef-inspired
recipes—perfectly
FIVE INDUCTION COOKING ELEMENTS
Enjoy a new level of rapid, precise heating with a cool-to-the-touch surface
that’s easy to clean
GLIDE TOUCH CONTROLS
Easy to use electronic controls allow you to precisely raise or lower heat in
an instant with one easy swipe
11″ 3700W INDUCTION ELEMENT
Rapidly boil water with our most powerful induction element
SYNCBURNERS
Control two 7″ elements simultaneously to evenly heat large cookware
MELT SETTING
Gently melt delicate foods without burning or scorching
CONTROL LOCK CAPABILITY
Protects against unintended activation
CUSTOM SETTINGS
Personalize your cooktop settings to fit your cooking style
PAN PRESENCE & SIZE SENSORS
Cook efficiently with elements that heat to the size of your pan and shut off
when no pan is present
FLUSH-MOUNT CAPABLE
Optional accessory kit enables the cooktop to be flush inset into the
countertop for a sleek, modern look
PRECISION COOKING
Achieve restaurant quality results with an optional probe that wirelessly
controls the temperature of your food. Ideal for Sous Vide, Slow Cooking,
making candy, etc., or for any other cooking that requires precise control of
temperature over time.
SPECIFICATIONS
| Overall Width | 36″ (91.4 cm) |
|---|---|
| Overall Depth | 20 3/8″ (51.8 cm) |
| Overall Height | 4 5/8″ (11.8 cm) |
| Cut-out Width | 33 7/8″ (86.0 cm) |
| Cut-out Depth | 19 1/8″ (48.6 cm) |
| Conduit Length | 48″ (122 cm) |
Electrical Rating
| 11,600W at 240V/60Hz
10,100W at 208V/60Hz
Recommended Circuit Breaker Size|
50 Amps
Net Weight| 56 lbs. (25.4 kg)
Approx. Shipping Weight| 63 lbs. (28.6 kg)
OPTIONAL ACCESSORIES
| Precision Cooking Kit | JXPROBE1 |
|---|---|
| Flush-Mount Kit | JXFLUSH1 |
| Griddle | JXGRIDL1 |
ATTENTION ELECTRICIAN:
This cooktop is provided with a 48″ flexible conduit and must be hard wired
(direct wired) into an approved junction box and be properly grounded. It is
not permitted to use a “plug and receptacle” type installation on this
cooktop.
Use a two-wire, three conductor 208/240 VAC, 60 Hertz electrical system. A
white (neutral) wire is not needed for this cooktop
For more details refer to the installation instructions for this product.
OVERALL DIMENSIONS
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may vary due to manufacturing tolerances.
INSTALLATION
Dimensions in parentheses are in centimeters unless otherwise noted.
HELPFUL TIPS
Ⓐ Wall coverings, countertop and cabinets surrounding cooktop must be able to
withstand temperatures of up to 200ºF.
Ⓑ Minimum 30″ clearance from countertop to unprotected overhead surfaces,
when no ventilation hood or microwave oven is installed.
Ⓒ When using a ventilation hood or microwave oven above the cooktop, see hood
or microwave installation instructions for minimum overhead clearance
dimensions.
Ⓓ Minimum 15″ of clearance from countertop to nearest overhead surface on both
sides of cooktop. Make sure to include any lighting rail covers in
calculation.
Ⓔ Minimum 2″ distance from edge of cutout to nearest adjacent side wall below
upper cabinets.
Ⓕ Install an approved junction box where it can be easily reached through the
front of the cabinet where the cooktop is located. IMPORTANT: For
serviceability, the junction box must be located where it will allow
considerable slack in the 48″ long conduit.
Ⓖ Maximum 13″ depth of unprotected overhead surfaces, when no ventilation
hood or microwave oven is installed.
Ⓗ For Americans with Disabilities Act (ADA) forward approach installation:
Minimum 5″ clearance between the top of the countertop and the enclosure. The
enclosure must be made of at least 1/4″ thick wood material, and must have an
access panel installed in order to provide access to the junction box and
hold-down brackets, and to allow for service of the cooktop.
For more details refer to the installation instructions for this product.
INSTALLATION ABOVE WALL OVEN
INSTALLATION ABOVE WARMING DRAWER
For more details, refer to the installation instructions for this product on Monogram.com. Dimensions in parentheses are in centimeters unless otherwise noted.
HELPFUL TIPS
Ⓐ Note this cooktop is only approved for installation above specific wall
ovens as labeled on this unit.
Ⓑ Warming drawers are approved for installation below only certain specified
cooktop models. See the label attached to the top of the warming drawer or
underside of the cooktop for approved combinations.
Ⓒ When installing this cooktop above a single wall oven, do not install the
baffle.
Ⓓ Maintain a minimum distance of 31-1/4″ from the top surface of the
countertop to the wall oven platform to ensure that the cooktop and wall oven
do not interfere with each other (see picture).
Ⓔ The cooktop platform must be a minimum height of 4-3/4″ from the floor to
ensure that the handle does not hit the floor when the door is open.
Ⓕ Junction box location for wall oven (may also be located in adjacent
cabinet).
Ⓖ Electrical connection for cooktop must be located in an accessible adjacent
location to the right (may also be located in adjacent cabinet).
Ⓗ When installing the cooktop above a warming drawer, a solid barrier must be
installed at least 5″ from the top of the countertop. Use any solid material
such as 1/4″ thick plywood. Allow at least a 2″ air gap between the front of
the barrier and the inside of the cabinet and at least 1/4″ air gap between
the barrier and the top of the warming drawer.
For more details refer to the installation instructions for this product
FLUSH MOUNT INSTALLATION Ⓐ
FLUSH-MOUNT INSTALLATION ABOVE WALL OVEN Ⓓ
FLUSH-MOUNT INSTALLATION ABOVE WARMING DRAWER Ⓗ **
**
more details, refer to the installation instructions for this product onMonogram.com. Dimensions in parentheses are in centimeters unless otherwise noted.
HELPFUL TIPS
Ⓐ Use optional JXFLUSH1 kit to flush-mount the cooktop into the countertop.
Read all installation instructions supplied with cooktop and kit before
beginning installation.
Ⓑ To avoid hot cookware from contacting the countertop surface, the cooktop
should be installed at least 1/32″ higher than the countertop.
Ⓒ Use strips of wood or solid-surface countertop material to reinforce the
countertop below the flush-mount rabbet. For an island or peninsular
installation secure strips to all four sides, otherwise just secure strips to
the front and back under the cutout.
Ⓓ Note this cooktop is only approved for installation above specific wall
ovens as labeled on this unit.
Ⓔ When installing this cooktop above a single wall oven, do not install the
baffle.
Ⓕ When this cooktop is installed above a flush-mounted wall oven, the
clearance from the front edge of the countertop to the front edge of the
cooktop cutout is minimum 2-1/2″ plus the wall oven cleat setback.
Ⓖ The cooktop platform must be a minimum height of 4-3/4″ from the floor to
ensure that the handle does not hit the floor when the door is opened.
Ⓗ Warming drawers are approved for installation below only certain specified
cooktop models. See the label attached to the top of the warming drawer or
underside of the cooktop for approved combinations.
Ⓘ When installing the cooktop above a warming drawer, a solid barrier must be
installed at least 5-1/2″ from the top of the countertop. Use any solid
material such as 1/4″ thick plywood. Allow at least 1/4″ air gap between the
barrier and the top of the warming drawer.
For more details refer to the installation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>