Infinix X666 Hot 20 5G Smartphone User Manual
- June 9, 2024
- Infinix
Table of Contents
Infinix X666
User Manual (C)
Explosion diagram specification
1| P740AE 6.6HD+V/MDT Panda/Black INCELL
assembly| 2| P740AE LCM CONDUCT FOAM 2
---|---|---|---
3| P740AE LCM CONDUCT FOAM 1| 4| P740AE REC DECO
5| P740AE REC NET| 6| P740AE FRG GRAPHITE
7| P740AE FRO FLASH MYLAR| 8| P740AE SIM MYLAR
9| P740AE CPU GRAPHITE SHEET| 10| P740AE FRO HSG PART
11| P740AE SIM RUBBER| 12| P740AE REC PET
13| P740AE SIM FOAM| 14| P740AE FLASH GUIDE
15| P740AE CAM PRESS FOAM| 16| P740AE PL GUIDE
17| P740AE PL RUBBER| 18| P740AE REAR CAM1 COPPER FOIL
19| P740AE BB SHIELD COPPER FOIL| 20| P740AE REC FOAM
21| P740AE Receiver| 22| P740AE FRO CAM RUB 7
23| P740AE Front cam| 24| P740AE PCBA
25| P740AE Screwl| 26| P740AE CARD DOOR ASSY
27| P740AE FOAM LCD WATERPROOF| 28| P740AE FOAM FIN WATERPROOF
29| P740AE FOAM FIN WATERPROOF| 30| P740AE Back cam
31| P740AE FOAM VICE CAM REAR| 32| P740AE SEAL FOAM MAIN FPC BTB
33| P740AE LCM CON STEEL| 34| P740AE SEAL FOAM FLASH
35| P740AE CAM FLA 2| 36| P740AE ADH FLASH
37| P740AE FOAM BTB LCM PCB UP| 38| P740AE FOAM BTB BATTERY
39| P740AE RF SHI GRAPHITE| 40| P740AE NFC FPC ASSY
41| P740AE Main Back cam| 42| P740AE FOAM MAIN CAM REAR
43| P740AE CONDUCT SPONGE FRO CAM| 44| P740AE REA HSG UP
45| P740AE Screw2| 46| P740AE BAT COV GRAPHITE SHEET
47| P740AE BAT WATERPROOF PORON| 48| P740AE BAT CAM SPONGE
49| P740AE Antenna GPS & Antenna MHB-UHB MIMO2| 50| P740AE Diversity antenna
UHB & WiFi
51| P740AE Diversity antenna LMB| 52| P740AE Antenna MHB-UHB MIMO1 & Main
Antenna 5G
53| P740AE BAT KEY| 54| P740AE Battery cover
55| P740AE ADH CAM LEN| 56| P740AE CAM LEN
57| P740AE BAT PORON| 58| P740AE Main Antenna HB-4G
59| P740AE Main Antenna LMB| 60| P740AE MIC RUBBER
61| P740AE MIC ADHESIVE| 62| P740AE BOX GRAPHITE SHEET
63| P740AE REA HSG DOWN| 64| P740AE SPEAKER FOAM
65| P740AE FOAM MAIN FPC BTB DOWN| 66| P740AE SPK
67| P740AE SPEAKER FOAM| 68| P740AE Coaxial black
69| P740AE Coaxial white| 70| P740AE SPEAKER CONDUCT FOAM
71| P740AE SPEAKER RUBBER| 72| P740AE battery
73| P740AE SPEAKER NET| 74| P740AE FINGER
75| P740AE Sub PCBA| 76| P840AE BATT PRO MEM
77| P740AE Moto| 78| P740AE JACK RUB
79| P740AE BAT ADHESIVE| 80| P740AE USB RUB
81| P740AE MIC FOAM| 82| P740AE SPK FPC ASSY
83| P740AE SPEAKER NET 1| 84| P740AE SIDEKEY FPC ASSY
85| P740AE USB CONDUCT FOAM| 86| P740AE SIDEKEY FPC CONDUCT
87| P740AE LCD graphite flake| |
Know your phone
- Front camera
- Volume + key
- Volume – key
1. Power key & side fingerprint sensor
SIM/SD card installation
- Power off mobile.
- Refer to the following picture for SIM / SD card installation.
Charging the phone
You can charge your device using a charger or by connecting it to the computer using a USB cable (comes with the phone). Use only INFINIX charger and cables. Other chargers or cables may damage the device. This will invalidate your phone warranty.
FCC Statement
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
SAR Information Statement
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radiofrequency
(RF) energy set by the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The guidelines are
based on standards that were developed by independent scientific organizations
through periodic and thorough evaluation of scientific studies. The standards
include a substantial safety margin designed to assure the safety of all
persons, regardless of age and health. The exposure standard for wireless
mobile phones employs a unit of measurement known as the Specific Absorption
Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are
conducted with the phone transmitting at its highest certified power level in
all tested frequency bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone while operating can
be well below the maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power required to reach
the network. In general, the closer you are to a wireless base station
antenna, the lower the power output. Before a phone model is available for
sale to the public, it must be tested and certified to the FCC that it does
not exceed the limit established by the government adopted requirement for
safe exposure. The tests are performed in positions and locations (e.g., at
the ear and worn on the body) as required by the FCC for each model. The
highest SAR value for this model phone when tested for use at the ear is
1.184W/Kg and when worn on the body, as described in this user guide, is
1.186W/Kg (Body-worn measurements differ among phone models, depending upon
available accessories and FCC requirements). The maximum scaled SAR in hotspot
mode is 1.379W/Kg. While there may be differences between the SAR levels of
various phones and at various positions, they all meet the government
requirement for safe exposure. The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels evaluated as in compliance
with the FCC RFexposure guidelines. SAR information on this model phone is on
file with the FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on
FCC ID: 2AIZN-X666 Additional information on Specific Absorption Rates (SAR)
can be found on the Cellular Telecommunications Industry Asso-ciation (CTIA)
web-site at http://www.wow-com.com. In the United States and Canada, the
SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged
over one gram of tissue. The standard incorporates a sub-stantial margin of
safety to give additional protection for the public and to account for any
variations in measurements.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 10mm must be
maintained between the user’s body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this device
should not contain any metallic components. Body-worn accessories that do not
meet these requirements may not comply with RF exposure requirements and
should be avoided. Use only the supplied or an approved antenna.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.
Operating SystemAndroid™ OS
Android is a trademark of Google LLC.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>