Toucan TVD200WUC Wireless Video Doorbell Camera User Manual

Toucan TVD200WUC Wireless Video Doorbell Camera

Regulations & Compliance

Fee Statement

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipemnt has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installaction. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 1 S of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including intereference that may cause undesired operation.

ISED Regulatory Compliance

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic

Development Canada’s lincence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

RF Exposure Compliance

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Cet e(luipement est conforme aux limites d’exposition aux radiations FCC/IC etablies pour un environnement non contrdle. Cet tquipement doit ltre instatte et utilise avec une distance minimale de 20 cm entre le radiateur et votre corps.

Cl2021 VUPOINT SOLUTIONS, INC. All Rights Reserved.

The Toucan logo and Toucan are trademarks or registered trademarks of Vu Point Solutions Inc. In the United States and other countries. App Store is a registered trademark of Apple Inc. iOS is a registered trademark of Cisco Technology, Inc. in the U.S. and other countries and is under license. Android and Google Play are registered trademarks of Google LLC. Product names, logos, brands and other trademarks referred to herein are the property of their respective trademark holders. All trademarks remain the property of their respective holders, and are used only to describe the products or services being provided. These trademark holders are not affiliated with VuPoint Solutions, Inc. They do not sponsor or endorse VuPoint Solutions, Inc’s products or services.

Items Included

Get to know your video doorbell and chime

Doorbell

1. Camera lens

2. Microphone

3. Light sensor

4. Doorbell button

5. Motion sensor

6. Speaker

7. SET/ Power ON button

8. RST / Power OFF pinhole button

9. Charging port
   Chime

10. LED indicator

11. SET button

12. Speaker

CHARGE YOUR VIDEO DOORBALL

Open the back cover, plug in micro usb cable to charge the video doorbell. Recommend to fully charge the device before 1st use.

LED DISCRIPTION

• Solid Red
  • Charging Battery
• Solid Blue
  • Battery Fully Charged

Setup your video doorbell

Download the Toucan App for Android or 10S

https://www.toucansolution.com/pages/toucan-smart-home-app

Open the app and create a free account

Open the app to add camera.

Press and hold the SET button until LED light blinks to enter the setup mode.

Follow the camera voice navigation to complete setup.

LED DESCRIPTION

Pairing your chime with your video doorbell

The chime and doorbell come pre-paired, but if you need to pair it again, follow the instructions in this section.

Press and hold the SET button on the Chime until the LED blinks, about 3 seconds

Press and hold the doorbell button for about 3 seconds to complete pairing with the chime

Install your video doorbell and chime

1. Drill holes For wall anchor placements

2. Insert wall anchors

3. Attach the mounting plate with included screws

4. Place the doorbell on mounting plate

5. Tighten the securing screw by turning it clockwise

6. Place the adhesive tape to the back of the chime and stick to the wall in a suitable location inside your home*

   • If using the adhesive to mount the doorbell, please adhere to the surface and wait 24-48 hours to enable maximum bond strength before adding the doorbell. Apply 3M adhesive to dry surfaces only.
   • You can mount the doorbell using just the adhesive on UPVC, wooden or smooth surface door frames (not suitable for brick or stone)
   • The Chime can be placed up to 50m from the doorbell

VuPoint Solutions. Inc. (USA):
710 Nogales Street,
City of Industry,
CA 91748

VuPolnt (Europe) Company Limited:
Innovation center,
Longbridge Technology Park,
Longbridge, Birmingham B31 2TS

facebook.com/toucansmarthome
lnstagram.com/toucansmarthome
Youtube.com/c/toucansmarthome

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>