Schneider Electric CCT5011-0002 Wiser Micro Module Light Switch User Manual
- June 9, 2024
- Schneider Electric
Table of Contents
Schneider Electric CCT5011-0002 Wiser Micro Module Light Switch
INSTALLATION INSTRUCTION
DIMENSION
About this product
The Wiser micro module light switch (hereinafter referred to as puck) is used to switch ohmic, inductive or capacitive loads.
Note: Do not control any devices that depends on a permanent power supply. Connect a maximum of 10 mechanical push buttons to the puck to provide direct operation.
- Check nominal power rating for load type
- “ Choose a suitable location to install
- Wiring diagram and electrical connections
- If you place the puck behind a mechanical push button, choose a wall box deep enough to fit both the puck and switch mechanism.
- Switch contact
- Live conductor
- Neutral conductor
- Mechanical push button input (switched) E Not used
- Not usedWiring diagram and electrical connections
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
Safe electrical installation must be carried out only by skilled professionals. Skilled professionals must prove profound knowledge in the following areas:
* Connecting to installation networks.
* Connecting several electrical devices.
* Laying electric cables.
* Safety standards, local wiring rules and regulations.Failure to follow these instructions will result in death or serious injury.
HAZARD OF ELECTRIC SHOCK
* Make sure that the terminal connection area does not come in contact with the metallic parts of any device installed in the same location.
* Do not short the outputs to neutral.
* The switch contact and live conductor connection must be separated from one another by a 240 VAC basic insulation.Failure to follow these instructions will result in death or serious injury.
-
Test puck operation
WARNING
HAZARD OF ELECTRIC SHOCK- Observe the regulations for working on live parts.
- Only actuate the device buttons using insulated auxiliary equipment that meets the requirements of EN 60900.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
-
% Read full device guide online
Scan the QR code and choose your language for complete information about the device, including operation, configuration and pairing the device to a Wiser system.
Technical data
Trademarks
- Zigbee® is a registered trademark of the Zigbee Alliance.
- Wiser™ is a trademark and the property of Schneider Electric SE, its subsidiaries and affiliated companies.
Other brands and registered trademarks are properties of their relevant owners.
EU Declaration of Conformity
Hereby, Schneider Electric Industries, declares that this product is in
compliance with the essential requirements and other relevant provisions of
RADIO EQUIPMENT DIRECTIVE 2014/53/EU. Declaration of conformity can be
downloaded on: se.com/docs
Schneider Electric Industries SAS
If you have technical questions, please contact the Customer Care Centre in
your country. se.com/contact
References
- Schneider Electric Global | Global Specialist in Energy Management and Automation
- Contact Support | Schneider Electric Global
- Schneider Electric Česká Republika | Globální specialista na efektivní hospodaření s energiemi a průmyslovou automatizaci
- Schneider Electric Казахстан | Мировой эксперт в управлении энергией и автоматизации
- Систэм Электрик - официальный сайт