CHAUVET Maverick Storm 2 Profile User Manual

CHAUVET Maverick Storm 2 Profile

Edition Notes

The Maverick Storm 2 Profile User Manual includes a description, safety precautions, installation, programming, operation and maintenance instructions for the Maverick Storm 2 Profile as of the release date of this edition.

Trademarks
Chauvet, Chauvet Professional, the Chauvet logo, Rogue, Outcast, and Rogue Outcast are registered trademarks or trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies.

Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all design, text and images are owned by Chauvet.
© Copyright 2023 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.

Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this manual or its content for any other purpose without written consent from Chauvet.

Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4 paper (210 x 297 mm), configure the printer to scale the content accordingly.

Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide that shipped with the product, as well as this manual, before installing, operating, or maintaining this product.

Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However, Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss, damage or disruption caused by any errors or omissions in this document, whether such errors or omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the content of this document without any obligation to notify any person or company of such revision, however, Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest version from www.chauvetprofessional.com.

Document Revision
This Maverick Storm 2 Profile User Manual is the 1st edition of this document. Go to www.chauvetprofessional.com for the latest version.

Before You Begin

What Is Included

• Maverick Storm 2 Profile
• Seetronic Powerkon IP65 power cable
• 2 Omega brackets with mounting hardware
• Quick Reference Guide

Claims

Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition. If the box or the contents (the product and included accessories) appear damaged from shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate a claim. In addition, keep the box and contents for inspection. For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery.

Text Conventions

Symbols

following these instructions may make the product not work, cause damage to the product, or cause harm to the operator.
| Important installation or configuration information. The product may not function correctly if this information is not used.
| Useful information.

Any reference to data or power connections in this manual assumes the use of Seetronic IP rated cables.

The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data transmission protocol.

FCC Compliance

This device complies with Part 15 Part B of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Safety Notes
Read all the following safety notes before working with this product. These notes contain important information about the installation, usage, and maintenance of this product.

This product contains no user-serviceable parts. Any reference to servicing in this User Manual will only apply to properly trained, certified technicians. Do not open the housing or attempt any repairs.

All applicable local codes and regulations apply to proper installation of this product.

Personal Safety

• The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 6.56 ft (2 m) is not expected.
• If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord exclusively available from the manufacturer or its service agent.
• The light source contained in this luminaire shall only be replaced by the manufacturer or its service agent or a similar qualified person.
• The luminaire is intended for professional use only.
• Always disconnect the product from the power source before cleaning or replacing the fuse.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Do not touch the product’s housing when operating because it may be very hot.

Mounting and Rigging

• Do not submerge this product (IP65). Temporary outdoor operation is fine.

• When using this product in an outdoor environment, use IP65 (or higher) rated power and data cables. Secure unused power and data ports with attached IP65 covers.

• CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm, humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow product to fully acclimate to the surrounding environment before connecting it to power.

• Not for permanent outdoor installation in locations with extreme environmental conditions. This includes, but is not limited to:

  • Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).
  • Locations where the normal high or low temperatures exceed the temperature ranges in this manual.
  • Locations that are prone to flooding or being buried in snow.
  • Areas where the product will be subjected to extreme radiation or caustic substances.

• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
  ï Make sure there are no flammable materials within 20 cm of this product while it is operating.

• When hanging this product, always secure to a fastening device using a safety cable.

• Never carry the product by the power cable.

Power and Wiring

• Make sure the power cable is not crimped or damaged.
• Always make sure to connect this product to the proper voltage in accordance with the specifications in this manual or on the product’s specification label.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
• Never connect this product to a dimmer pack or rheostat.
• Make sure to replace the fuse with another of the same type and rating.
• Never disconnect this product by pulling or tugging on the power cable.

Operation

• Do not operate this product if there is damage on the housing, lenses, or cables. Have the damaged parts replaced by an authorized technician at once.
• Do not cover the ventilation slots when operating to avoid internal overheating.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate the product at higher temperatures.
• The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
• The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.
• In the event of a serious operation problem, stop using this product immediately!

If a Chauvet product requires service, contact Chauvet Technical Support.

Expected LED Lifespan
Over time, use and heat will gradually reduce LED brightness. Clustered LEDs produce more heat than single LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is 40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit the overall intensity.

Introduction

Description

The Maverick Storm 2 Profile fits a full armory of features into the lightest midsized IP65 moving profile in its division. Drafted to fill designer demand for a double-duty compact powerhouse that combines the latest Maverick series technical achievements with the durability and versatility to perform indoors and out. Sculpt its 28,000 lumens of output with an exquisitely sharp framing shutter system, zoom down to a slicing 5.5 degree beam, and freely create with a wheelhouse that includes variable CMY + CTO color mixing, color wheel with CRI and CTB filters, static and rotating gobo wheels, five-facet prism, iris, and frost. This Maverick weathers the storm and welcomes the sunshine with Sun Shield technology that comes on with complete protection of all internal optical components whenever the fixture powers down.

Features

• Fully featured, compact and lightweight IP65 580 W LED yoke profile fixture including CMY + CTO color mixing, a 4-blade framing shutter system with rotation, a color wheel, 10:1 zoom, a 5-facet prism wheel, 1 rotating and 1 static gobo wheel, integrated sun shield
• 16-bit dimming of master dimmer for smooth control of fades
• Variable CMY + CTO color mixing system to create a wide pallet of colors
• CRI and CTB filters on color wheel for added flexibility
• One rotating, indexing and interchangeable slot and lock gobo wheel
• One rotating static gobo wheel
• DMX, WDMX, sACN, and Art-Net for full flexibility of control options
• RDM control over DMX for fixture reporting
• 6.3° to 58.6° zoom range for variable beam sizes
• Iris, 5-facet prism and frost for beam control
• True 1 compatible power input
• Integrated sun shield for protecting the optical path from sunlight when the fixture is off
• Three setup menu presets and preset sync for cross loading to multiple like fixtures for easy shop setup
• USB slot for software uploads
• Battery backup display with auto-rotate depending on fixture orientation

Product Overview

Product Dimensions

Setup

AC Power

The Maverick Storm 2 Profile has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
The listed current rating indicates the product’s average current draw under normal conditions.

• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.

AC Plug

The Maverick Storm 2 Profile comes with a power input cable terminated with a Seetronic Powerkon A connector on one end and bare wire on the other end (U.S. market). Use the table below to wire a plug.

Fuse Replacement

1. Disconnect this product from the power outlet.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with another fuse of the same type and rating (F 20 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.

Remote Device Management (RDM)

Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer as not all DMX controllers have this capability. The Maverick Storm 2 Profile supports RDM protocol that allows feedback to make changes to menu map options.

USB Software Update

The Maverick Storm 2 Profile allows for software update through USB using the built-in USB port. The product’s USB port supports up to 32GB capacity and only works with FAT32 file format. To update the software using a USB flash drive, do the following:

1. Power on the product and plug the flash drive into the USB port.
2. Once the flash drive has been detected, the message “Upgrade Firmware” will be displayed. Press . If a different message appears on the display, search for the updated software in the menu (Updated Firmware). A list of the updated software files will be displayed.
3. Select the file that needs to be uploaded. The message “Are you sure?” will be displayed. Press .
4. If the selected file is correct, the update will be completed. Restart the product. If the selected file is incorrect, the update will fail, and the display will go back to the main interface. Repeat steps 1–3 using the correct file.

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. For our CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/.

Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation, configuration, and maintenance.

Rigging

Chauvet recommends using the following general guidelines when mounting this product.

• Before deciding on a location for the product, make sure there is easy access to the product for maintenance and programming purposes.
• Make sure that the structure onto which the product is being mounted can support the product’s weight. See the Technical Specifications for weight information.
• When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.

Procedure

The Maverick Storm 2 Profile comes with 2 omega brackets to which mounting clamps (sold separately) can be directly attached. Make sure the clamps are capable of supporting the weight of this product. Use at least two mounting points per product. For the CHAUVET Professional line of mounting clamps, go to http://www.trusst.com/products.

Mounting Diagram

Signal Connections

The Maverick Storm 2 Profile can receive a DMX, Art-Net™, or sACN, signal. The Maverick Storm 2 Profile has two Amphenol XLRnet through ports, and 5-pin DMX in and out ports. If using other compatible products with this product, it is possible to control each individually with a single controller.

Control Personalities

The Maverick Storm 2 Profile uses a 5-pin DMX data connection, WDMX, Art-Net™, or sACN for its two control personalities: Dmx Mode 32 CH and Dmx Mode 48 CH.

• Refer to the Operation chapter to learn how to configure the Maverick Storm 2 Profile to work in these personalities.
• The Control Channel Assignments and Values section provides detailed information regarding the control personalities.

For more information about DMX standards or the DMX cables needed to link this product to a DMX controller, download the DMX Primer from the Chauvet website: www.chauvetprofessional.com.

DMX Linking
The Maverick Storm 2 Profile can link to a DMX controller using a 5-pin DMX connection or a WDMX
connection. For more information about DMX, read the DMX primer at: https://-
www.chauvetprofessional.com/wp- content/uploads/2016/06/DMX_Primer.pdf.

Art-Net™ Connection
Art-Net™ is an Ethernet protocol that uses TCP/IP that transfers a large amount of DMX512 data using an Amphenol XLRnet RJ45 connection over a large network. An Art-Net™ protocol document is available from www.chauvetprofessional.com.
Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.

sACN Connection

Also known as ANSI E1.31, streaming ACN is an Ethernet protocol that uses the layering and formatting of Architecture for Control Networks to transport DMX512 data over IP or any other ACN-compatible network.

Connection Diagram

Operation

Control Panel Description

value when in a function
**| < MENU>| Exits from the current menu or function
**| < DOWN>| Navigates downwards through the menu list or decreases the value when in a function
**| < LEFT>| Navigates leftwards through the menu list
**| < ENTER>| Enables the currently displayed menu or sets the selected value into the function
**| < RIGHT>**| Navigates rightwards through the menu list

Battery Powered Display

The Maverick Storm 2 Profile has a battery powered display which enables access to the menu when the product is powered off. Press and hold < MENU> until the display activates (approximately 15 seconds).

Home Screen The Maverick Storm 2 Profile has a home screen that shows the current control protocols, personalities, starting addresses, IP addresses, and universes. To see the home screen, press < MENU> repeatedly until it shows on the display. From the home screen, touch any of the displayed control settings to immediately jump to that part of the menu, such as the personality, starting address, or universe, or press < ENTER > to reach the main menu.

Control Panel Lock

The setting locks or unlocks the control panel.

1. Go to the Settings main level.
2. Select the Lock Screen option.
3. Select NO (control panel stays unlocked) or YES (locks control panel).

When the control panel lock is activated, the product will prompt for the passcode in order to access the menu. Enter the passcode as described below.

Passcode

After being prompted to enter the passcode, enter the numbers 0920.

Technician Mode

The technician mode disables the pan/tilt motors, allowing the output of the product to be aimed by hand. To enable the technician mode of the Maverick Storm 2 Profile, hold < UP> and < LEFT > while the product is powering on. When the product is turned off and back on, the pan and tilt will return to normal function.

Menu Map

Refer to the Maverick Storm 2 Profile product page on www.chauvetprofessional.com for the latest menu map.

001–256 (sACN)

| Sets the universe
Ip| . . . ( 000–255 )| Sets the IP address in Manual mode
SubMask| . . . ( 000–255 )| Sets the Subnet Mask in Manual mode
Personality| Dmx Mode 32 CH| NO YES| __Selects the 32-channel mode

Selects the 48-channel mode

Dmx Mode 48 CH
Settings| Control Mode| DMX|

Sets the control protocol

ArtNet
sACN
WDMX
Pan Reverse| NO| Normal pan
YES| Reversed pan
Tilt Reverse| NO| Normal tilt
YES| Reversed tilt
Screen Reverse| NO| Normal screen display
YES| Inverted screen display
AUTO| Automatic display orientation
Pan Angle| 540| 540° pan range
360| 360° pan range
180| 180° pan range
Tilt Angle| 270| 270° tilt range
180| 180° tilt range
090| 90° tilt range
BL. O. P/T

Move

| NO| Enable/disable blackout while panning/ tilting
YES
BL. O. Color Move| NO| Enable/disable blackout while color wheel is moving
YES
BL. O. Gobo Move| NO| Enable/disable blackout while gobo wheels are moving
YES
Lock Screen| NO| Lock the buttons Passcode: 0920
YES
Swap XY| NO| Do not swap pan and tilt
YES| Pan controls tilt, tilt controls pan
WDMX Reset| NO| Do not reset WDMX
YES| Reset WDMX
Backlight Timer| 30S| Display turns off after 30 seconds
1M| Display turns off after 1 minute
5M| Display turns off after 5 minutes
ON| Display stays on
Loss of Data| Hold| Holds last signal received
Close| Blacks out fixture
Main Level| Programming Levels| Description
---|---|---
Settings

(cont.)

| Fans| Auto| Fan speed according to product temperature
Full| Fan speed set on high
ECO| Quiet mode
TV25| Maintains LED output up to an ambient temperature of 77 °F (25 °C) ( TV25 ) or 95 °F (35 °C) ( TV35 ).

When using these fan modes, please set the PWM Options to 6000Hz or 15000Hz to prevent any harmonization noise.

TV35
Dimmer Curve| Linear| Set the dimmer curve
Square
I Squa
SCurve
Linear2
PWM Option| 600 Hz| Sets the Pulse Width Modulation frequency
1200 Hz
4000 Hz
6000 Hz
15000 Hz
LED POWER| 64–255| Sets LED power
Min Zoom Focus| NO| Enables/disables Min Zoom Focus
YES
Preset Select| PRESET A| Recorded preset menu options
PRESET B
PRESET C
Preset Sync| NO| Transfers recorded preset menu options to other Maverick Storm 2 Profile fixtures in the DMX daisy chain
YES
USB Update| NO| Update firmware via USB C
YES
Reset Function| Pan/Tilt| NO YES| Reset individual functions or all functions from start-up
Iris/Prism
Color/CMY/ Blade
Gobo/Gobo Rotate
Frost
All
Factory Settings| NO| Reset to factory default settings
YES
Test| Auto Test| Auto test all functions
Manual Test| Pan| 0–255| Manually control and test all settings through the control panel
Pan Fine
Tilt
Tilt Fine
P/T Speed
Dimmer
Dimmer Fine
Main Level| Programming Levels| Description
---|---|---
Test

(cont.)

| Manual Test

(cont.)

| Shutter| 0–255| Manually control and test all settings through the control panel
Virtual Shaking
Cyan
Magenta
Yellow
CTO
Color
Gobo
Gobo Rotate
Gobo Index
Gobo2
Blade1-1
Blade1-1 Fine
Blade1-2
Blade1-2 Fine
Blade2-1
Blade2-1 Fine
Blade2-2
Blade2-2 Fine
Blade3-1
Blade3-1 Fine
Blade3-2
Blade3-2 Fine
Blade4-1
Blade4-1 Fine
Blade4-2
Blade4-2 Fine
Blade Rotate
Blade. Rota Fine
Focus
Focus Fine
Focus Auto
Zoom
Zoom Fine
Prism
Prism Rotate
Iris
Frost
CMY Macro
CMY Macro Speed
Control
Information| Fixture Information| Ver           V. _| Shows firmware version
Running Mode        | Shows current running mode
DMX Address          _| Shows current starting address
Temperature           _| Shows current product temperature in °C
Main Level| Programming Levels| Description
---|---|---
Information

(cont.)

| Fixture Information (cont.)| Fixture Hours       _| Shows hours product has been on
LED Hours          _| Shows hours LED has been on
Ip | Shows current IP address
SubMask | Shows current Subnet Mask
MAC | Shows MAC address
Fan Information| FAN _ _ _ (x9) Speed | Shows speed of each fan in rpm
Base Fan1–2 Speed
Error Information| _| Shows any errors, or No Error!
Channel Information| Frequency| 000–255| Shows all current values from input signals
Pan
Pan Fine
Tilt
Tilt Fine
P/T Speed
Dimmer
Dimmer Fine
Shutter
Virtual Shaking
Cyan
Magenta
Yellow
CTO
Color
Gobo
Gobo Rotate
Gobo Index
Gobo2
Blade1- 1
Blade1- 1 Fine
Blade1- 2
Blade1- 2 Fine
Blade2- 1
Blade2- 1 Fine
Blade2- 2
Blade2- 2 Fine
Blade3- 1
Blade3- 1 Fine
Blade3- 2
Blade3- 2 Fine
Blade4- 1
Blade4- 1 Fine
Blade4- 2
Blade4- 2 Fine
Blade Rotate
Blade. Rota Fine
Main Level| Programming Levels| Description
---|---|---
Information

(cont.)

| Channel Information (cont.)| Focus Fine| 000–255| Shows all current values from input signals
Focus
Focus Auto
Zoom
Zoom Fine
Prism
Prism Rotate
Iris
Frost
CMY Macro
CMY Macro Speed
Control

Configuration (DMX, Art-Net™, sACN)

Use control configurations to operate the product with a DMX, Art-Net™, or sACN controller.

Control Mode
The Maverick Storm 2 Profile works with wired DMX, WDMX, Art-Net™, and sACN control signals. To select which protocol to use:

1. Go to the Settings main level.
2. Select the Control Mode option.
3. Select the desired protocol, from DMX, ArtNet, sACN, or WDMX.

Control Personalities
To set the control personality:

1. Go to the Personality main level.
2. Select the desired personality, from Dmx Mode 32 CH or Dmx Mode 48 CH
   • See the Starting Address section for the highest selectable starting address for each personality.
   • Make sure that the starting addresses on the various products do not overlap due to the new personality setting.

Starting Address
Each product will respond to a unique starting address from the controller. All products with the same starting address will respond in unison. To set the starting address:

1. Go to the Address main level.
2. Select the starting address (001–512).
   • The highest recommended starting address for Dmx Mode 32 CH is 481.
   • The highest recommended starting address for Dmx Mode 48 CH is 465.

Network Setup

The Network Setup settings control the IP address, subnet mask, and universe of the product.

IP Mode
To choose how the IP address is set:

1. Go to the Network Setup main level.
2. Select the IP Mode option.
3. Select the desired IP mode, from Manual (to set a custom IP address), DHCP (the IP address is assigned by the connected network), or Static (the product uses a default, preset IP address).

Universe
To assign an Art-Net™ or sACN universe to the Maverick Storm 2 Profile:

1. Go to the Network Setup main level.
2. Select the Universe option.
3.  Set the universe, from 000–255 (for Art-Net™) or from 001–256 (for sACN).

Manual IP Address
To set the IP address when the IP Mode is set to Manual:

1. Go to the Network Setup main level.
2. Select the Ip option.
3. Set the 4 values of the IP address from 000–255.

Subnet Mask
To set the subnet mask:

1. Go to the Network Setup main level.
2. Select the SubMask option.
3. Set the 4 values of the subnet mask from 000–255.

Control Channel Assignments and Values

077 ó 145

| Synchronized strobe, slow to fast

Pulse strobe, slow to fast

 |  |  | 146 ó 215| Random strobe, slow to fast
 |  |  | 216 ó 255| On
 |  |  | 000 ó 001| No function
8| 9| Virtual shaking| 002 ó 128| Shaking effect, slow to fast
 |  |  | 129 ó 255| Fade effect, slow to fast
9| 10| Cyan| 000 ó 255| 0–100%
10| 11| Magenta| 000 ó 255| 0–100%
11| 12| Yellow| 000 ó 255| 0–100%
12| 13| CTO| 000 ó 255| 0–100%
 |  |  | 000 ó 006| Open
 |  |  | 007 ó 013| Color 1 (red)
 |  |  | 014 ó 020| Color 2 (orange)
 |  |  | 021 ó 027| Color 3 (green)
 |  |  | 028 ó 034| Color 4 (magenta)
13| 14| Color wheel| 035 ó 041

042 ó 048

| Color 5 (blue)

Color 6 (CTO)

 |  |  | 049 ó 059| Color 7 (CTB)
 |  |  | 060 ó 187| Color wheel indexing
 |  |  | 188 ó 219| Color scroll, fast to slow
 |  |  | 220 ó 223| Stop
 |  |  | 224 ó 255| Reverse color scroll, slow to fast
32CH| 48CH| Function| Value| Percent/Setting
---|---|---|---|---
14| 15| Gobo wheel 1

(see Gobo Wheels)

| 001 ó 007

008 ó 015

016 ó 023

024 ó 031

032 ó 039

040 ó 047

048 ó 055

056 ó 063

064 ó 071

072 ó 079

080 ó 087

088 ó 095

096 ó 103

104 ó 111

112 ó 119

120 ó 127

128 ó 191

192 ó 255

| Open

Gobo 1 (Pipes & Poles) Gobo 2 (Cookie Cutter) Gobo 3 (This Way) Gobo 4 (Fast Moves) Gobo 5 (Laser Rays) Gobo 6 (Limbo)

Gobo 7 (Fractured Mycelium) Gobo 7 shaking, slow to fast Gobo 6 shaking, slow to fast Gobo 5 shaking, slow to fast Gobo 4 shaking, slow to fast Gobo 3 shaking, slow to fast Gobo 2 shaking, slow to fast Gobo 1 shaking, slow to fast Open

Gobo scroll, slow to fast

Reverse gobo scroll, slow to fast

15| 16| Gobo wheel 1 rotate| 000 ó 063| Gobo index
064 ó 145| Clockwise rotation, fast to slow
146 ó 149

150 ó 231

| Stop

Counterclockwise rotation, slow to fast

232 ó 255| Alternating clockwise/counterclockwise rotation, short to long
–| 17| Gobo 1 fine rotate| 000 ó 255| Fine control (16-bit)
16| 18| Gobo wheel 2

(see Gobo Wheels)

| 000 ó 005

006 ó 011

012 ó 017

018 ó 023

024 ó 029

030 ó 035

036 ó 041

042 ó 047

048 ó 053

054 ó 063

064 ó 069

070 ó 075

076 ó 081

082 ó 087

088 ó 093

094 ó 099

100 ó 105

106 ó 111

112 ó 117

118 ó 127

128 ó 191

192 ó 255

| Open

Gobo 1 (Dots)

Gobo 2 (Paperclip Party) Gobo 3 (Orbital)

Gobo 4 (Dirty Dirt) Gobo 5 (Box Cutter) Gobo 6 (Crazy Turns) Gobo 7 (Hex Chem) Gobo 8 (Scribble)

Gobo 9 (Aperture)

Gobo 9 shaking, slow to fast Gobo 8 shaking, slow to fast Gobo 7 shaking, slow to fast Gobo 6 shaking, slow to fast Gobo 5 shaking, slow to fast Gobo 4 shaking, slow to fast Gobo 3 shaking, slow to fast Gobo 2 shaking, slow to fast Gobo 1 shaking, slow to fast Open

Gobo scroll, slow to fast

Reverse gobo scroll, slow to fast

011 ó 030

031 ó 050

051 ó 070

071 ó 090

091 ó 110

111 ó 130

131 ó 150

151 ó 170

171 ó 190

191 ó 210

211 ó 255

| No function 0-5 meters

6  meters

7  meters

8  meters

9  meters

10  meters

12.5 meters 15 meters

17.5 meters 20-60 meters

Auto detect distance

27| 40| Zoom| 000 ó 255| 0–100% (wide to narrow)
–| 41| Zoom fine| 000 ó 255| Fine control (16-bit)
28| 42| Prism| 000 ó 004

005 ó 255

| No function

Prism insert

29| 43| Prism rotate| 000 ó 127

128 ó 189

190 ó 193

194 ó 255

| Prism index

Clockwise rotation, fast to slow Stop

Counterclockwise rotation, slow to fast

30| 44| Iris| 000 ó 063

064 ó 127

128 ó 191

192 ó 255

| Big to small

Auto change, slow to fast

Slow open, fast close, slow to fast Fast open, slow close, slow to fast

31| 45| Frost| 000 ó 255| 0–100%
32CH| 48CH| Function| Value| Percent/Setting
---|---|---|---|---

–

| ****

46

| ****

CMY macro

| 000 ó 003

004 ó 006

007 ó 009

010 ó 255

| No function Full CTO 1/4 CTO

CMY macro

–| 47| CMY macro speed| 000 ó 255| Fast to slow
32| 48| Control

(3 second hold)

| 000 ó 007

008 ó 015

016 ó 023

024 ó 031

032 ó 039

040 ó 047

048 ó 055

056 ó 095

096 ó 103

104 ó 111

112 ó 119

120 ó 127

128 ó 135

136 ó 143

144 ó 151

152 ó 159

160 ó 167

168 ó 175

176 ó 183

184 ó 191

192 ó 199

200 ó 207

208 ó 215

216 ó 220

221 ó 225

226 ó 230

231 ó 235

236 ó 240

241 ó 245

246 ó 250

251 ó 255

| No function

Blackout during pan/tilt

Blackout while color wheel is moving Blackout while gobo wheels are moving Blackout during pan/tilt/color wheel Blackout during pan/tilt/gobo wheels

Blackout during pan/tilt/color wheel/gobo wheels

No function Pan reset Tilt reset

Color wheel reset Gobo wheels reset No function

Prism reset Blades reset All reset

Iris reset Frost reset Zoom reset

CMY/CTO reset Fan mode ECO Fan mode Full Fan mode Auto Fan mode TV25 Fan mode TV35 No function Pan/tilt swap on Pan/tilt swap off

Min Zoom Focus off

Min Zoom Focus on No function

Configuration (Settings)

Pan Reverse
To set the orientation of the pan:

1. Go to the Settings main level.
2. Select the Pan Reverse option.
3. Select from NO (normal pan motion), or YES (reversed pan motion).

Tilt Reverse
To set the orientation of the tilt:

1. Go to the Settings main level.
2. Select the Tilt Reverse option.
3. Select from NO (normal tilt motion), or YES (reversed tilt motion).

Screen Reverse
To set the orientation of the display:

1. Go to the Settings main level.
2. Select the Screen Reverse option.
3. Select from NO (right-side up), YES (upside-down), or AUTO (automatic orientation).

Pan Angle
To set the maximum angle of the pan:

1. Go to the Settings main level.
2. Select the Pan Angle option.
3. Select from 540 (540°), 360 (360°), or 180 (180°).

Tilt Angle
To set the maximum angle of the tilt:

1. Go to the Settings main level.
2. Select the Tilt Angle option.
3. Select from 270 (260°), 180 (180°), or 090 (90°).

Black out on Movement
To set the product to black out while the pan/tilt, color wheel, or gobo wheels are moving:

1. Go to the Settings main level.
2. Select from the BL. O. P/T Move (black out on pan/tilt movement), BL. O. ColorMove (black out on color wheel movement), or BL. O. GoboMove (black out on gobo wheel movement) options.
3. Select from NO or YES.

Swap Pan and Tilt
To swap the controls for the pan and tilt:

1. Go to the Settings main level.
2. Select the Swap XY option.
3. Select from NO (pan controls pan, tilt controls tilt) or YES (pan controls tilt, tilt controls pan).

WDMX Reset
To reset the WDMX connection:

1. Go to the Settings main level.
2. Select the WDMX Reset option.
3. Select from NO or YES.

Display Backlight Timer
To set how long before an inactive display will turn off:

1. Go to the Settings main level.
2. Select the Backlight Timer option.
3. Select the length of the backlight timer, from 30S (30 seconds), 1M (1 minute), 5M (5 minutes), or ON (always on).

Fan Mode
To set the fan speed mode:

1. Go to the Settings main level.
2. Select the Fans option.
3. Select the fan mode, from Auto (fan speed adjusts to product temperature), Full (fan speed at maximum), ECO (quiet mode), TV25 (maintains LED output up to an ambient temperature of 77 °F [25 °C]), or TV35 (maintains LED output up to an ambient temperature of 95 °F [35 °C]).

When using the TV25 or TV35 fan mode, please set the PWM Options (Pulse Width Modulation) to 6000Hz or 15000Hz to prevent any harmonization noise.

Dimmer Curve
To set the dimmer curve:

1. Go to the Settings main level.
2. Select the Dimmer Curve option.
3. Select the dimmer curve, from Linear, Square, I Squa, SCurve, or Linear2.

Pulse Width Modulation
To adjust the frequency of the pulse width modulation:

1. Go to the Settings main level.
2. Select the PWM Option option.
3. Select the frequency, from 600Hz, 1200Hz, 4000Hz, 6000Hz, or 15000Hz.

LED Power
To set the power of each LED color:

1. Go to the Settings main level.
2. Select the LED POWER option.
3. Set the LED power from 64–255.

Minimum Zoom Focus
To enable or disable the Min Zoom Focus function:

1. Go to the Settings main level.
2. Select the Min Zoom Focus option.
3. Select NO (manual independent zoom control) or YES (focus adjusts depending on zoom setting).

Preset Selection
To select a preset configuration of menu options:

1. Go to the Settings main level.
2. Select the Preset Select option.
3. Select from PRESET A (default), PRESET B, or PRESET C.
   • Changes to settings automatically save to the currently selected Preset.
   • If no Preset has been selected, changes to settings save to PRESET A.
   • After selecting a Preset, the product will restart.

Preset Synchronization
To transfer saved Presets from one Maverick Storm 2 Profile to another:

1. Connect the Maverick Storm 2 Profile products to receive the Presets by a DMX daisy chain.
2. Make the Maverick Storm 2 Profile with the Presets to transfer the first in the DMX daisy chain.
3. Power on all of the products.
4. Set all of the products to a Control Mode other than WDMX. (DMX, ArtNet, or sACN)
5. On the Maverick Storm 2 Profile with the Presets, go to the Settings main level.
6. Select the Preset Sync option.
7. Select NO (to cancel) or YES (to transfer the Presets to the connected products).
   • All menu configurations are transferred except for the IP address.
   • ONLY connect Maverick Storm 2 Profile products for this function!

USB Update
To enable or disable software update using USB:

1. Go to the Settings main level.
2. Select the USB Update option.
3. Select NO (disables software update through USB) or YES (enables software update through USB).

See the USB Software Update section for the detailed instructions on how to update the Maverick Storm 2 Profile software using a USB C connection.

Reset Function
To reset specific functions or the entire product:

1. Go to the Settings main level.
2. Select the Reset Function option.
3. Select the functions to reset, from Pan/Tilt, Iris/Prism, Color/CMY/Blade, Gobo/Gobo Rotate, Frost, or All.
4. Select NO (to cancel) or YES (to reset the selected functions).

Factory Reset
To reset the product to factory settings:

1. Go to the Settings main level.
2. Select the Factory Reset option.
3. Select NO (to cancel) or YES (to reset the product configuration).

Test Mode

Auto Test
To have the Maverick Storm 2 Profile automatically test all functions one after the other:

1. Go to the Test main level.
2. Select the Auto Test option.

Manual Test
To manually test an individual function of the Maverick Storm 2 Profile:

1. Go to the Test main level.
2. Select the Manual Test option.
3. Select a function to test, from Pan, Pan Fine, Tilt, Tilt Fine, P/T Speed, Dimmer, Dimmer Fine, Shutter, Virtual Shaking, Cyan, Magenta, Yellow, CTO, Color, Gobo, Gobo Rotate, Gobo Index, Gobo2, Blade1-1, Blade1-1 Fine, Blade1-2, Blade1-2 Fine, Blade2-1, Blade2-1 Fine, Blade2-2, Blade2-2 Fine, Blade3-1, Blade3-1 Fine, Blade3-2, Blade3-2 Fine, Blade4-1, Blade4-1 Fine, Blade4-2, Blade4-2 Fine, Blade Rotate, Blade. Rota Fine, Focus, Focus Fine, Focus Auto, Zoom, Zoom Fine, Prism, Prism Rotate, Iris, Frost, CMY Macro, CMY Macro Speed, or Control.
4. Increase or decrease the value of the selected function from 0–255 to test it.

System Information
The information section of the menu displays statistics and the current status of the product’s various functions.
To view this information:

1. Go to the Information main level.
2. Select from the Fixture Information, Fan Information, Error Information, or Channel Information options.
3. Use and to view all information.

Offset Mode (Zero Adjust)
The Offset mode provides fine adjustments for the home position of every moving part in the optical path as well as the pan and tilt movements.
To adjust these options and prevent borders showing or reduction of the light output:

1. From the main level screen, press and hold until the passcode screen appears.
2. Enter the passcode: 0920 and press .
3. Select the “zero” position to adjust, from PAN, TILT, COLOR, GOBO, GOBO ROTATE, GOBO2, FOCUS-GOBO, FOCUS-GOBO2, ZOOM, PRISM, IRIS, FROST, Light Block, CYAN, MAGENTA, YELLOW, CTO, BLADE1-1, BLADE1-2, BLADE2-1, BLADE2-2, BLADE3-1, BLADE3-2, BLADE4-1, BLADE4-2, BLADE ROTATE, DIMMER1, DIMMER2, MAC4, MAC5, MAC6, RDM ID4, RDM ID5, or RDM ID6.
4. Adjust the “zero” position for the selected function from 000–255.

Web Server
The Maverick Storm 2 Profile Web Server can be accessed by any computer on the same network as the product. It allows network access to system information, settings such as control setup, manual testing of all functions, firmware updates, and the ability to change the Web Server password.

1. Connect the product to power, and set the Control Mode to ArtNet and the IP Mode to Static.
2. Connect the product to a Windows computer with a network cable.
3. On the computer, set the first value of the IP address of the new network to match the first value of the IP address of the product. The IP address of the product is displayed on the Home Screen.
4. Enter the IP address of the product into the URL bar of a web browser on the computer.
5. Enter both the User Name and Password as admin to log in.

Information
The Information page on the Web Server displays the current settings and the system information of the Maverick Storm 2 Profile.

Setup
The Setup page on the Web Server provides options for control, similar to the Setup menu on the product.
Click Save Settings to send the new configuration to the product.

Manual Test
The Manual Test page on the Web Server allows all output functions of the product to be controlled through the browser. To set all functions back to default, click Reset.

Firmware Update
The Upgrade page on the Web Server allows the product to be updated with the latest firmware. Go to https://www.chauvetprofessional.com to download firmware updates.

Security
The Security page on the Web Server gives the option to change the password to the connected product’s web server. Enter the old password (admin, by default) and the new password twice, then click Save Settings to change the password.

Gobo Wheels

Gobo Wheel 1
Rotating Gobo Wheel

Gobo Wheel 2
Static Gobo Wheel

Gobo Dimensions for Gobo Wheel 1

Gobo Replacement

The gobos in gobo wheel 1 are removable from their gobo holder. This operation is quite simple, although it requires the technician to carefully follow the recommended procedure.

• Make sure to disconnect the product’s power cord before replacing a gobo.
• Always replace a gobo with a gobo of the same dimensions.
• When inserting a glass gobo, always make sure that the shiny side of the gobo (glass base) faces the light source. This provides a layer of protection against the high temperature from the LED.

Procedure

1. Turn the product off and disconnect it from the power outlet.
2. Open the head cover by loosening the screws on the top cover.
3. Separate the gobo holder away from the gobo wheel by pushing it toward the front of the moving head (direction 1 in the diagram). Be careful not to push the gobo out of the gobo holder.
4. Extract the gobo holder by pulling it outward (direction 2 in the diagram).
5. On a flat surface, remove the expansion ring that holds the gobo in place and remove the gobo from the gobo holder.
6. Insert a new gobo and hold it in place with the expansion ring.
7. Slide the tip of the gobo holder under the pressure plate near the center of the gobo wheel.
8. Push the gobo holder inwards. DO NOT force the gobo holder into the gobo wheel slot. If correctly installed, the gobo holder should easily slide into the gobo wheel slot.

Diagram

Maintenance

Product Maintenance
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean each lighting product at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency.

To clean the product, follow the instructions below:

1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.

Always dry the transparent surfaces carefully after cleaning them.
Do not spin the cooling fans with compressed air. Damage may result.

Torque Measurements
To maintain the IP rating when reassembling the product, use the given torque measurements for each of the following screws and bolts:

• Screws inside feet: 15.3 Kgf.cm, 13.3 lgb.in
• Base screws around outside (not the feet): 16.3 Kgf.cm, 14.16 lgb.in
• Base screws in middle: 35.6 Kgf.cm, 90.9 lgb.in
• Omega bracket holder: 12.2 Kgf.cm, 10.6 lgb.in
• Front and rear base cover: 25.5 Kgf.cm, 22.1 lgb.in
• Screws around power and data ports: 3.5 Kgf.cm, 3 lgb.in
• Fuse: 7.1 Kgf.cm, 6.1 lgb.in
• Center of yoke plate: 25.5 Kgf.cm, 22.1 lgb.in
• Arm cover screws: 25.5 Kgf.cm, 22.1 lgb.in
• Allen Key screws next to front lens: 25.5 Kgf.cm, 22.1 lgb.in
• Allen Key screws holding in front lens cover: 12.2 Kgf.cm, 10.6 lgb.in
• Allen Key screws next to heat pipes on the back: 25.5 Kgf.cm, 22.1 lgb.in
• Allen Key screws head covers: 25.5 Kgf.cm, 22.1 lgb.in

Vacuum Test Measurements
To ensure that the product has been reassembled correctly, use the IP Tester from Chauvet Professional to check the following data has the given measurements for the given method:

• Method: Positive
• Test Pressure (kPa): 2.18
• Test Duration (seconds): 60
• PASS State leak pressure (kPa): <0.02

Technical Specifications

Dimensions and Weight

Note: Dimensions in inches are rounded.

Power

Operating
Current| 8.20 A| 6.82 A| 3.77 A| 3.41 A| 3.34 A
Fuse/Breaker| F15 A, 250 V| F15 A, 250 V| F15 A, 250 V| F15 A, 250 V| F15 A, 250 V
Power I/O| U.S./Worldwide| UK/Europe
Power Input Connector
Power Cable plug| Seetronic Powerkon A
Edison| Seetronic Powerkon A
Local plug

Light Source

Type| Color| ty

Quantity

| Power| Current| Lifespan
---|---|---|---|---|---
LED| Cool White| 1 1| 580 W| 4.2 A| 50,000 hours

Photometrics

Thermal

Control

Ordering

Contact Us

Address: 5200 NW 108th Ave.
Sunrise, FL 33351
Voice: 954-577-4455
Fax: 954-929-5560
Toll Free: 800-762-1084| Voice: 844-393-7575
Fax: 954-756-8015
Email: chauvetcs@chauvetlighting.com ,
 Website: www.chauvetprofessional.com
Chauvet U.K.|
Address: Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: +44 (0) 1773 511115
Fax: +44 (0) 1773 511110| Email: UKtech@chauvetlighting.eu
Website: www.chauvetprofessional.eu

Chauvet Benelux|
Address: Stokstraat 18
9770 Kruishoutem
Belgium
Voice: +32 9 388 93 97|  Email: BNLtech@chauvetlighting.eu
Website: www.chauvetorofessional.eu

Chauvet France|
Address: 3, Rue Ampere 91380 Chilly-Mazarin

France

Voice: +33 1 78 85 33 59

| Email: FRtech@chauvetlighting.fr
Website: www.chauvetprofessional.eu

Chauvet Germany|
Address: Bruno-Burgel-Str. 11

28759 Bremen

Germany

Voice: +49 421 62 60 20

| Email: DEtech@chauvetlighting.de
Website: www.chauvetprofessional.eu

Chauvet Mexico|
Address: Av. de las Particles 34 – 3B

(Entrance by Calle 2)

Zona Industrial Lerma
Lerma, Edo. de Mexico, CP 52000
Voice: +52 728-690-2010

| Email: servicio@chauvet.com.mx
Website: www.chauvetprofessional.mx

Warranty & Returns
For warranty terms and conditions and return information, please visit our website.
For Customers in the United States and Mexico: www.chauvetlighting.com /warranty-registration.
For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg,
France, and Germany: www.chauvetlighting.eu/warranty- registration.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>