Maelsrlg E17 Base Smart Light Bulb User Guide
- June 5, 2024
- Maelsrlg
Table of Contents
Maelsrlg E17 Base Smart Light Bulb User
Turn on the Bluetooth
Connect to your Wi-Fi network of 2.4GHz ( Not 5.0GHz).
Download
Download the Smart Life-Smart Living App from the App store or Google Play.
Register / Login
Log in or Enter your email address to register.
Light it up
Make your smart bulb in search mode.
Turn on the bulb for the first tinme:
Case 1
The bulb is blinking, indicating that the bulb is in search mode.
Case 2
The bulb usually goes on without blinking You must close and open the switch 3
times in a row to enter search mode.
You can also follow the instructions on the application
Add the Device
- Select the “+”symbol on the top right corner
- Select “Lighting”
- Select “Light Source(Wi-Fi)”
Then, follow the instructions to pair the device.
Note
Please ensure the Wi-Fi account name and password you enter afterward are entirely correct.(Pay attention to capitalization)
Setting upa third-party for your voice assistant
In the “Smart life” menu, go to the “ME” page followed by “More Service” mode
to help you select your voice assistant step by step.
From your Google Home application
- In the home menu select the symbol “+” following “Set up device.”
- Find the Smart Life app and select “Enable.”
- Enter the same registry that you previously used in the Smart Life app.
You can now say commands such as:
“OK Google, dim the bedroom lights to10%”
“Ok Google, turn on / off the lights in my bedroom.”
Or
From your Amazon Alexa application:
- In the “Skills” menu search for the Smart Life app and select “Enable.”
- Enter the same registry that you previously used in the Smart Life app.
You can now say commands such as:
“Alexa, dim the lights of the kitchen to 10%.”
“Alexa, turn on / off the lights in my room.”
FCC Rules
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>