niko 353-751021 Surface Mounted Presence Detector Instruction Manual
- June 4, 2024
- niko
Table of Contents
353-751021 Surface Mounted Presence Detector
**Instruction Manual
**
4-year warranty
Ø 76 mm
Presence detector P46LR, DALI-2, secondary and BMS, 32-37 m, 360°, SnapFit, or flush mounting
Wiring
**** 230 V/DALI power – OFF
Secondary
BMS
Dimensions
Installation
NOT REMOVABLE
(fixed ceiling)| REMOVABLE
(suspended ceiling)
---|---
|
| 
App settings
230 V/DALI power – ON
| Sensitivity
---|---
Factory Settings| High
Settings by BMS software
**** DALI power – ON
DALI BMS-instellingen
Table memory bank 2
Address| Description| Default value| Memory type
0x00| Address and last accessible memory location| 0x03| ROM
0x01| Indicator byte (manufacture definable)| 0x00| any
0x02| Memory bank lock byte (00×55 = Read Only else Read/ Write)| 0xFF| RAM
0x03| HR sensitivity segment A (MR, LR and HC detectors) 4 = MAX 3 = HIGH 2 =
LOW 1 =MIN 0 = OFF| 0x03| NVM
0x04| PR sensitivity segment B (LR and HC detectors)
4 = MAX 3 = HIGH 2 = LOW 1 =MIN 0 = OFF| 0x03| NVM
0x05| PR sensitivity segment C (LR and HC detectors)
4 = MAX 3 = HIGH 2 = LOW 1 =MIN 0 = OFF| 0x03| NVM
0x06| LUX range
0 = NORMAL 0 – 1023 lux, 10-bit 1 = HIGH 0 – 10360 lux, 14 bit| Ox00| NVM,
LED behavior
****230 V/DALI power – ON
Green LED continuously on| | Connection OK|
---|---|---|---
Green LED flashing| | Warming up| Wait
Red LED continuously on| | Error| More info –>
Blue LED flashing| | Walk test active
Specifications
| Article number | 353-751021 |
|---|---|
| Configuration | DALI-2 secondary/BMS |
| Input voltage | via the DALI bus |
| Maximum current consumption | 28.1 mA |
| Nominal current consumption (12 V, 25°C) | 8.1mA |
| Maximum startup time DALI | < 1200 ms |
| Maximum PIR detection startup time | 70 s |
| Light intensity range | 0 – 10360 lux (see DALI BMS settings) |
| Detection angle | 360° |
| Detection range (PIR) | ø 37 m from a height of 3 m |
| Ambient temperature | -25 – +40 °C |
| Mounting method | flush mounting with SnapFit mounting bracket |
| Mounting height | 2 – 3.5 m |
| Drill diameter | 76 mm |
| Minimum flush mounting depth | 56.9 mm |
| Colour | white (RAL 9010) |
| Dimensions visible (HxWxD) | 100 x 100 x 42.2 mm |
| Dimensions (HxWxD) | 120 x 120 x 99.1 mm |
| Wire capacity | 1.5/2.5 mm² |
| Protection degree | IP20 |
| Impact resistance | IK04 |
| Modification of settings | pp (iOS/Android) and 2-way Bluetooth ® |
communication/BMS software
Maximum range Bluetooth ® (free field, depending on the device)| 50 m
Operating frequency| 2.4 GHz
Maximum radio frequency power| – 2 dBm
Halogen-free| yes
Marking| CE
Detection area
Troubleshooting
| Problem | Possible cause | Proposed solution |
|---|---|---|
| The load does not turn on | The wiring is not correct | Check the wiring scheme |
| The load does not turn off | The detector receives false triggers | Check for |
any objects that may cause false triggering and remove them from the detection
range or lower the sensitivity
The app cannot connect to the detector| Bluetooth ® has been disabled on your
mobile device| Enable Bluetooth ® on your mobile device
Support & contact
NV Niko sa
Industriepark West 40
9100 Sint-Niklaas, Belgium
www.Niko.eu
+32 3 778 90 80
support@niko.eu
Niko prepares its manuals with the greatest care and strives to make them as
complete, correct, and up-to-date as possible. Nevertheless, some deficiencies
may subsist. Niko
cannot be held responsible for this, other than within the legal limits.
Please inform us of any deficiencies in the manuals by contacting Niko
customer services at support@niko.eu.
PM353-751021R22202
Documents / Resources
| niko
353-751021 Surface Mounted Presence
Detector
[pdf] Instruction Manual
353-751021, Surface Mounted Presence Detector, Mounted Presence Detector,
Presence Detector, 353-751021, Detector
---|---