NINJA CO650B Professional Blender Owner’s Manual

NINJA CO650B Professional Blender

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY

• Read and review instructions for operation and use.
• Indicates the presence of a hazard that can cause personal injury, death or substantial property damage if the warning included with this symbol is ignored.
• For indoor and household use only.
  When using electrical appliances, basic safety precautions should always be followed, including the following:

WARNING
To reduce the risk of injury, fire, electrical shock or property damage, basic safety precautions must always be followed, including the following numbered warnings and subsequent instructions. Do not use appliance for other than intended use.

1. Read all instructions prior to using the appliance and its accessories.

2. Carefully observe and follow all warnings and instructions. This unit contains electrical connections and moving parts that potentially present risk to the user.

3. Take your time and exercise care during unpacking and appliance setup. This appliance contains sharp, loose blades that can cause injury if mishandled.

4. Upon completion of processing, ensure the blade assembly is removed BEFORE emptying container’s contents. Remove the blade assembly by carefully grasping the top of the shaft and
   lifting it from the container. Failure to remove the blade assembly before emptying the container results in a risk of laceration.

5. If using the pour spout, hold the cover in place on the container or ensure lid lock is engaged when pouring to avoid risk of injury.

6. Take inventory of all contents to ensure you have all parts needed to properly and safely operate your appliance.

7. Blades are sharp. Handle carefully.

8. The blade assemblies are sharp and are NOT locked in place in their containers. The blade assemblies are designed to be removable to facilitate cleaning and replacement if needed. ONLY grasp the blade assembly by the top of the shaft. Failure to use care when handling the blade assemblies will result in a risk of laceration.

9. NEVER place the blade assembly on the motor base without it first being attached to the container with the lid also in place.

10. This product is provided with a Stacked Blade Assembly. ALWAYS exercise care when handling blade assembly. The blade assembly is sharp and is NOT locked in place in its container. The blade
    assembly is designed to be removable to facilitate cleaning and replacement if needed. ONLY grasp the blade assembly by the top of the shaft. Failure to use care when handling the blade assembly will result in a risk of laceration.

11. DO NOT blend hot liquids. Doing so may result in pressure buildup and steam exposure that can pose a risk of the user being burned.

12. Turn the appliance OFF, then unplug the appliance from the outlet when not in use, before assembling or disassembling parts, and before cleaning. To unplug, grasp the plug by the body and pull from the outlet. NEVER unplug by grasping and pulling the flexible cord.

13. Before use, wash all parts that may contact food. Follow washing instructions covered in this instruction manual.
    WARNING
    To reduce the risk of injury, fire, electrical shock or property damage, basic safety precautions must always be followed, including the following numbered warnings and subsequent instructions. Do not use appliance for other than intended use.

14. Before each use, inspect blade assembly for damage. If a blade is bent or damage is suspected, contact SharkNinja to arrange for replacement.

15. DO NOT use this appliance outdoors. It is designed for indoor household use only.

16. This appliance has a polarized plug (one prong is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT modify the plug in any way.

17. DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner. This appliance has no user-serviceable parts. If damaged, contact SharkNinja for servicing.

18. This appliance has important markings on the plug blade. The entire supply cord is not suitable for replacement. If damaged, please contact SharkNinja for service.

19. Extension cords should NOT be used with this appliance.

20. To protect against the risk of electric shock, DO NOT submerge the appliance or allow the power cord to contact any form of liquid.

21. DO NOT allow the cord to hang over the edges of tables or counters. The cord may become snagged and pull the appliance off the work surface.

22. DO NOT allow the unit or the cord to contact hot surfaces, including stoves and other heating appliances.

23. ALWAYS use the appliance on a dry and level surface.

24. DO NOT allow children to operate this appliance or use as a toy. Close supervision is necessary when any appliance is used near children.

25. This appliance is NOT intended to be used by people with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

26. ONLY use attachments and accessories that are provided with the product or are recommended by SharkNinja. The use of attachments, including canning jars, not recommended or sold by SharkNinja may cause fire, electric shock, or injury.

27. Keep hands, hair, and clothing out of the container when loading and operating.

28. During operation and handling of the appliance, avoid contact with moving parts.

29. DO NOT fill container past the MAX FILL or MAX LIQUID lines.

30. DO NOT operate the appliance with an empty container.

31. DO NOT microwave container or accessories provided with the appliance.

32. NEVER leave the appliance unattended while in use.

33. DO NOT process dry ingredients with the Stacked Blade Assembly.

34. DO NOT perform grinding operations with the Stacked Blade Assembly.

35. NEVER operate the appliance without lids and caps in place. DO NOT attempt to defeat the interlock mechanism. Ensure the container and lid are properly installed before operation.

36. Before operation, ensure all utensils are removed from container. Failure to remove utensils can cause container to shatter and potentially result in personal injury and property damage.

37. Keep hands and utensils out of container while chopping to reduce the risk of severe personal injury or damage to the blender/food chopper. A scraper may be used ONLY when the blender or
    processor is not running.

38. DO NOT open pour spout cap while blender is operating.

39. If you find unmixed ingredients sticking to the sides of the pitcher, stop the appliance, remove the lid, and use a spatula to dislodge ingredients. NEVER insert your hands into the pitcher, as you may contact one of the blades and experience a laceration.

40. DO NOT attempt to remove the container or lid from the motor base while the blade assembly is still spinning. Allow the appliance to come to a complete stop before removing lids and containers.

41. If the appliance overheats, a thermal switch will activate and temporarily disable the motor. To reset, unplug the appliance and allow it to cool for approximately 30 minutes before using again.

42. DO NOT expose the container and accessories to extreme temperature changes. They may experience damage.

43. The maximum wattage rating for this appliance is based on the configuration of the Stacked Blade Assembly and the pitcher.

44. DO NOT submerge the motor base or control panel in water or other liquids. DO NOT spray motor base or control panel with any liquid.

45. DO NOT attempt to sharpen blades.

46. Turn off the appliance and unplug the motor base before cleaning

GETTING STARTED

The Ninja® Professional Blender 1000 is a high powered kitchen tool that is perfect for ice crushing, blending, pureeing and controlled processing. Create all of your favorite recipes quickly and easily with just one touch of a button. For best results, be sure to carefully read all the instructions contained in the manual before using this appliance

• A Lid with Locking Handle
• B Locking Handle Release Button
• C Pouring Spout with Cap
• D Pitcher
• E Stacked Blade Assembly
• F Gear Shaft
• G Motor Base (power cord and cord storage not shown)
• H Control Panel
• I Nonslip Bottom

BEFORE FIRST USE

IMPORTANT
• Review all warnings at the beginning of this Owner’s Guide before proceeding

1. Remove all packaging material and labels from the appliance. Separate all parts from each other.
2. Wash the lid, pitcher, and Stacked Blade Assembly in warm, soapy water. When washing the blade assembly, use a dishwashing utensil with a handle to avoid direct hand contact with blades.
3. Handle blade assembly with care to avoid contact with sharp edges. Rinse and airdry thoroughly.
4. The pitcher and Stacked Blade Assembly are dishwasher safe. It is recommended the lid and Stacked Blade Assembly be placed on the top rack. Ensure the Stacked Blade Assembly is removed from the pitcher before placing in the dishwasher.
5. Wipe the motor base clean with a damp cloth.

PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE APPLIANCE:
Make sure the motor base is plugged in for use.

• NEVER add ingredients into the container before placing the Blade Assembly in first.
• DO NOT attempt to operate the appliance without the lid on.
• NEVER run the appliance empty.
• Appliance accessories are not intended to be used in the microwave, as it may result in damage to the accessories.

ASSEMBLY & USE OF THE PITCHER

IMPORTANT
Review all warnings at the beginning of this Owner’s Guide before proceeding

1. Place the motor base on a clean, dry, level surface such as a counter or tabletop.
2. Align and lower the pitcher onto the motor base.
3. Rotate the pitcher clockwise until it locks in place. You will hear a click when the lock is engaged.
4. The pitcher can be placed on the motor base two ways; the handle can be on the front right corner or the front left corner.
5. Holding the Stacked Blade Assembly by the top of the shaft, place it onto the drive gear inside the pitcher. Ensure the Stacked Blade Assembly is seated properly and is standing upright.

NOTE
The Stacked Blade Assembly will fit loosely on the drive gear.

6. Add the ingredients to the pitcher, making sure they do not exceed the highest measured marking line on the side of the pitcher.

NOTES
If you need to add additional ingredients while the appliance is processing, open the pour spout cap and pour the ingredients in through the opening.
When blending any kind of liquids, such as mixtures of any drinks or smoothies, do not exceed the “Max Liquid” mark (64 ounces) on the pitcher.

7. Plug the power cord into the electrical outlet and press the power button ( ).
   IMPORTANT
   As a safety feature, the power button ( ) will flash and the motor will not work if the pitcher and lid are not installed correctly. When the pitcher and lid are installed properly, the power button ( ) will be solid, indicating the blender is ready for use.

8. Holding the lid by the handle in the upright position, place it on top of the pitcher, aligning the arrow (down) located on the lid with the arrow (up ) located on the pitcher’s handle. Press the handle down until you hear a click.

9. Select the speed according to your blending requirements*:

   • Use the LOW setting for processing and mixing.
   • Use the SMOOTHIE setting for intelligent preset program to combine unique blending and pausing patterns that do the work for you.
   • Use the HIGH setting for pureeing and liquefying.
   • Use the PULSE button for controlled chopping and processing.
   • *See Blending Chart.
     NOTE
     Pulse ingredients for even chopping by pressing down in short intervals

10. When ingredients have reached your desired consistency, stop the appliance by pressing the power button ( ) and wait for the Stacked Blade Assembly to stop turning.

11. To remove the lid, press the release button on the lid, pull the lid handle up to a 90° angle, and lift the lid off. Turn the pitcher counterclockwise and then lift off the base.

12. Open the pour spout cap and use the spout to empty liquid contents.
    For thicker consistencies, first remove the lid by pressing the release button and pulling the lid handle up to a 90° angle to lift lid off the pitcher. Then, carefully remove the Stacked Blade Assembly by the top of the shaft. Place Stacked Blade Assembly away from the work area to avoid accidental contact. Finally, empty contents from the pitcher.

13. Make sure the unit is unplugged when not in use.

BLENDING CHART

On/Off

| ****

Always turn appliance off when not in use.

LOW

| ****

Processing & Mixing

| Use to mix thin batters, gravies, and marinades; beat eggs; puree cooked foods and uncooked fruits; and chop vegetables for dips and salsa.

AUTO-IQ SMOOTHIE

| ****

Smoothie Making

| Use to combine your favorite fresh or frozen ingredients, liquids, and powders to create smoothies and protein shakes.

HIGH

| ****

Pureeing & Liquefying

| Use to mix smoothies, frappes, liquefy thick mixtures and blend whole fruits and vegetables.

PULSE

| Controlled Processing & Bursts of Power| ****

Use to control chopping and processing.

CARE & MAINTENANCE

CLEANING

1. Separate all parts from each other.

2. Hand-Washing: Wash the pitcher, lid, and Stacked Blade Assembly in warm, soapy water. When washing the Stacked Blade Assembly, use a dishwashing utensil with a handle to avoid direct hand contact with blades. Handle blade assembly with care to avoid contact with sharp edges. Rinse and air-dry thoroughly.
   Dishwasher: The pitcher, lid, and Stacked Blade Assembly are all dishwasher safe. The lid and Stacked Blade Assembly are top-rack dishwasher safe. Ensure the Stacked Blade Assembly is removed from the pitcher before placing in the dishwasher.

3. Wipe the motor base clean with a damp cloth.

STORING
Store the Ninja® Professional 1000 upright with the Stacked Blade Assembly inside the pitcher with the lid secured on top. Do not place anything on top. Loosely wrap the power cord around the cord
storage hook in the back of the unit.

ORDERING REPLACEMENT PARTS

To order additional parts and accessories, visit ninjaaccessories.com or contact Customer Service at 1-877-646-5288.

TROUBLESHOOTING GUIDE

WARNING: To reduce the risk of shock and unintended operation, turn power off and unplug unit before troubleshooting.

• Motor doesn’t start or Stacked Blade Assembly doesn’t rotate.

  • Make sure the pitcher is securely placed on motor base.
  • Make sure the lid is securely on pitcher in the correct position (align arrows).
  • The blender is turned off. Press the power button to turn on.
  • Check that the plug is securely inserted into the electrical outlet.
  • Check the fuse or circuit breaker.
  • The unit has overheated. Unplug and wait approximately 15 minutes before using again.

• Ingredients are unevenly chopped.
  Try reducing the amount of ingredients for processing. Also, make sure ingredient pieces are cut in even sizes before processing.

• Ingredients are chopped too fine or is too watery.
  The ingredients have been over-processed. Use PULSE button for controlled processing.

• Ingredients collect on lid or on the sides of the pitcher.
  The mixture is too thick. Add more liquid.

• You cannot achieve snow from solid ice.
  DO NOT use ice that has been sitting out or has started to melt. Use ice straight from the freezer and make sure the pitcher is completely dry before adding ice.

My unit shuts off during use:

1. Unplug the unit from the electrical outlet.
2. Remove and empty the pitcher and ensure no ingredients are jamming the Stacked Blade Assembly.
3. Allow the unit to cool for approximately 15 minutes.
4. Place the pitcher onto the base and plug the unit into the electrical outlet.
5. roceed to use the unit as before, making sure to not exceed the recommended maximum capacities.

ONE (1) YEAR LIMITED WARRANTY

The One (1) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of one (1) year from the date of purchase when it is used under normal household conditions and
maintained according to the requirements outlined in the Owner’s Guide, subject to the following conditions and exclusions:

• What is covered by this warranty?

  • The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced up to one (1) year from the original purchase date.
  • In the event a replacement unit is issued, the warranty coverage ends six (6) months following the receipt date of the replacement unit or the remainder of the existing warranty, whichever is
  • later.
    SharkNinja reserves the right to replace the unit with one of equal or greater value.

• What is not covered by this warranty?

  • Normal wear and tear of wearable parts (such as blending vessels, lids, cups, blades, blender bases, removable pots, racks, pans, etc.), which require regular maintenance and/or replacement
    to ensure the proper functioning of your unit, are not covered by this warranty. Replacement parts are available for purchase at ninjaaccessories.com.

  • Any unit that has been tampered with or used for commercial purposes.

  • Damage caused by misuse, abuse, negligent handling, failure to perform required maintenance (e.g., failure to keep the well of the motor base clear of food spills and other debris), or damage
    due to mishandling in transit.

  • Consequential and incidental damages.

  • Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its
    parts) when the repair is performed by a repair person not authorized by SharkNinja.

  • Products purchased, used, or operated outside North America.

• How to get service
  If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit ninjakitchen.com/support for product care and maintenance self-help. Our Customer Service Specialists are also available at 1-877-646-5288 to assist with product support and warranty service options, including the possibility of upgrading to our VIP warranty service options for select product categories. So we may better assist you, please register your product online at registeryourninja.com and have the product on hand when you call. SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of $20.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit.

• How to initiate a warranty claim
  You must call 1-877-646-5288 to initiate a warranty claim. You will need the receipt as proof of purchase. We also ask that you register your product online at registeryourninja.com and have
  the product on hand when you call, so we may better assist you. A Customer Service Specialist will provide you with return and packing instruction information.

• How state law applies
  This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. Some states do not permit the exclusion or limitation of incidental or consequential
  damages, so the above may not apply to you.

RECORD THIS INFORMATION

Model Number:
Serial Number:
Date of Purchase:
(Keep receipt)
Store of Purchase:

TECHNICAL SPECIFICATIONS

• Voltage: 120V~, 60Hz
• Power: 1000 Watts
• Pitcher
• Capacity: 72 oz. (2.1 L)
• Max Liquid
• Capacity: 64 oz. (8 cups, 1.9 L)

SharkNinja Operating LLC
US: Needham, MA 02494
CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
ninjakitchen.com

Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.
NINJA and TOTAL CRUSHING are registered trademarks of SharkNinja Operating LLC.
This product may be covered by one or more U.S. patents.
See sharkninja.com/patents for more information.
© 2022 SharkNinja Operating LLC
CO650B_IB_MP_Mv4

@ninjakitchen

References

• Sharkninja Home
• Sign In

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>