RainPoint TCS005FRF WiFi Irrigation Soil Moisture Sensor User Manual
- June 9, 2024
- RainPoint
Table of Contents
TCS005FRF WiFi Irrigation Soil Moisture Sensor
User Manual
Model No. TCS005FRF
Email:service@rainpointus.com
WhatsApp: +1 626-780-5952
Free Hotline
US: 1-833-381-5659 (EN)
EU: +44 800-808-5337 (EN DE)
Save the user manual for future reference
If you have any questions, please contact us to get support
FCC STATEMENT:
(FCC ID: 2AWDBTCS005FRF)
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Warning: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
CATALOG
PRODUCTION OVERVIEW
- PRODUCT APPEARANCE
- PRODUCT SPECIFICATIONS
MAIN FUNCTIONS
INSTALLATIONS
- DEVICE CONNECTION
- SETTING SOIL SENSOR
- AUTO RUNNING
WARRANTY & WARNINGS
CUSTOMER SUPPORT
EC REP
NAME：VIAJE ELECTRONICCOMPANY LIMITED ADDRESS：E588, 13 ADELAIDE ROAD, DUBLIN,
D02 P950, IRELAND
EMAIL：VIAJEELE@OUTLOOK.COM
PRODUCTION OVERVIEW
- PRODUCT APPEARANCE
PRODUCT SPECIFICATIONS
- Power by 3 x AAA 1.5V alkaline batteries, batteries life over 1 year
- Data update every 5 minutes
- RF frequency 433.92MHz FSK
- Soil Moisture Range 0% ~ 100% (Volume Water Content)，accuracy ≤5% (0% ~ 50%) or ≤10% (51% ~ 100%)
- Soil Temperature Range -10℃ ~ 60℃
MAIN FUNCTIONS
- Checking the soil humidity and temperature through Control Master APP
- Check the current soil moisture through the sensor button
- 5 LED lights indicate 5 levels of soil moisture levels: 20%, 40%, 60% 80% and 100%
- Set the “Stopping Watering Moisture Level” through the sensor, default humidity level is 60%
- RF connection with rainpoint Wi-Fi Water Timer
- Low battery power indicator
- IP67 water proof
INSTALLATIONS
DEVICE CONNECTION
-
After connected our Wi-Fi water timer with APP, click the Water Timer icon, switch to “Sensor” interface.
-
“Sensor” interface will show Soil sensor icon and Rain sensor icon. The switch button is in gray color, it means the sensor haven’t connect yet.
-
Screw off the sensor battery door and install the batteries to the soil sensor near our Wi-Fi water timer. After installing the batteries, the GREEN LED light will turn on for few seconds.
-
After the green LED light turn off, please press and hold the button at the back of the sensor for five seconds until the RED LED light turn on, it means the sensor is ready for connecting.
-
When the RED light turn on, please tap the soil sensor button at the App, it will automatically search and connect the sensor, it will take around 10 seconds. After connected, the soil sensor icon will turn to green color and show the battery power level in APP. Switch to “Parameter” interface, user will see the soil data.
-
After confirm connected, screw the battery door, insert into the earth where you needed. The distance between Soil Sensor and Wifi Water Time must within 100 meters in open area.
SETTING SOIL SENSOR
- After finishing connection, press and hold the two buttons for 5 seconds, user can wake up the program, the LED light will show the current Soil moisture level. 5 LED lights indicate 5 levels of soil moisture levels:20%, 40%, 60% 80% and 100% (Volume Water Content).
- When wake up the LED light, press the Left button, user can set the “Stop Watering Soil Moisture Level”, default humidity is at 60%. After setting, press Right button or wait for 20 seconds to confirm.
- When wake up the LED light, press the Right button, user can check the current soil moisture level. (User can view the accurate data through our APP).
AUTO RUNNING
After setting “Stop Watering Soil Moisture Level” and pair successfully, the
Wi-Fi water timer will automatically stop watering plan once the Soil moisture
reach the setting level.
WARRANTY & WARNINGS
Rainpoint provides a 1-year warranty against manufacturing defects in
materials and workmanship from the date of purchase.
During the warranty period, we’ll replace free of charge the product found to
be defective under reasonable use and service as determined solely by
RainPoint.
To place a warranty request, please email us with your order ID at
service@rainpointus.com and we’ll respond
within 24 hours.
CUSTOMER SUPPORT
Still have trouble with setup, please search for “RainPoint” on YouTube for
installation videos!
If the user manual doesn’t have what you’re looking for or you need other
help, please contact us before returning the product to the store and let us
know the LOT NO. of your device.
US Free Hotline: 1-833-3815659 (EN)
EU Free Hotline: +44 800-808-5337 (EN
DE)
WhatsApp: +1 626-780-5952
E-mail: service@rainpointus.com
LOT NO.: XXXXXX (On the back of the timer)