SONY XS692ES Mobile ES Two-Way Component Speakers Owner’s Manual
- June 9, 2024
- Sony
Table of Contents
XS692ES Mobile ES Two-Way Component Speakers
Owner’s Manual
XS692ES Mobile ES Two-Way Component Speakers
Experience dynamic sound with astonishing clearness. The woofer provides power
and depths while the component soft-dome tweeter gives the best stereo sound
staging just before your eyes.
Bullets
- Soft-dome component tweeter covers up to 40 kHz ultra-highs
- Separated Notch Edge Surround for less distortion and clear sound
- Five-beam Frame design disperses resonance
- Dynamic Air Diffuser ensures efficient air circulation for smooth cone travel and cooling
Features
Separated Notch Edge Surround
The woofer surround features another proprietary Sony technology, with
distinctive curved notches improving the vertical amplitude symmetry, for
dramatically reduced distortion and enhanced clarity.
Five-beam Frame Structure & Dynamic Air Diffuser
The Five-beam Frame design disperses resonance while the integrated Dynamic
Air Diffuser ensures efficient air circulation for smooth cone travel and
cooling of the voice coil.
Progressive Height Rate Spider
The acoustically optimized spider allows for higher power handling and
airflow, with a profile designed for more rapid and precise cushioning of the
speaker cone.
Phase plug
The resonance damping phase plug on the XS-692ES woofer helps realize ideal
frequency response, right up to the crossover point with the matched tweeters.
A rigid aluminum bobbin and Dynamic Air Diffuser further support the speaker’s
wide frequency response, for controlled and dynamic bass delivery.
Tweeters to hit the high notes
Compatible with High-Resolution Audio, a soft-dome tweeter diaphragm is
directly attached on the voice coil, designed to cover your music’s ultra-high
ends, with a frequency range extending up to 40 kHz.
Bi-amp-capable crossover with gain selector
The audiophile-grade crossover features an optimal, lower-resistance film
capacitor for smooth high-end. Its bi-amp capable design mitigates current
distortion to the tweeter when running the woofer with high input levels. A
dedicated gain selector helps keep balance of woofer and tweeter signal
levels, and enables tweeter level adjustment even when driving the components
from a single amplifier.
Specification
General Features|
---|---
Effective Frequency Range Impedance (ohms)| 35–40,000 Hz
Impedance (ohms)| 4
Output Sound Pressure| 90 dB ±2 dB SPL (1 W, 1 m)
Peak Power| 330 W
RMS Power| 110 W
Rated power| 90 W
Size & Weight|
---|---
Weight| 3.09 lb
Speaker System|
---|---
Configuration| Component, 2way
Size| 6 x 9″ (16 x 24 cm)
Tweeter|
---|---
Diameter| 1″ (2.5 cm)
TYPE| Soft Dome
Tweeter Diaphragm Material Tweeter Magnet Material| Synthetic Fiber
Tweeter Magnet Material| Neodymium
Woofer|
---|---
Surround Material| Rubber (Separated Notch)
TYPE| Cone
Woofer Magnet Material| Ferrite
- Mobile ES and Mobile ES logo are trademarks or registered trademarks of Sony Corporation.
- Designs and specifications are subject to change without notice.
©2022 Sony Electronics, Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Sony and the Sony logo are trademarks and or registered trademarks of Sony Corporation. All other trademarks are trademarks of their respective owners. Features and specifications are subject to change without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>