FITSTREAM 1675679 E1 Yellow Portable USB-C Charging Mixer User Manual

1675679 E1 Yellow Portable USB-C Charging Mixer
User Manual

PRODUCT LEGEND

1. silicone strap
2. bottle cap
3. detachable filter/sieve
4. translucent PVC bottle
5. stainless steel knives
6. blender base
7. on/off switch
8. USB-C power connector

PRODUCT DESCRIPTION

white
Material:| certified food ABS plastic
Power supply:| DC 3.7 – 5.0V
Motor speed:| 22 000 rpm no filling (deviation 15%) (capacity for 8-12 mixing cycles) 15 000 rpm with filling (deviation 15%)
Motor power:| 7.4W
Battery:| 2 000 mAH
Charging:| 3 hours via the included USB-C cable with mobile phone charger
Dimensions:| 75 X 75 X 230MM (width X depth X height)

USAGE

1. First use:
   FitStream is supplied partially charged when purchased, so you can clean the blender to be ready for use.
   Cleaning is easy. Just pour water, add a drop of detergent, run and rinse.

2. Start with the liquid:
   Always start by adding liquid (such as water, milk or juice). This will facilitate mixing.

3. Slicing ingredients:
   Slice the ingredients into small pieces (approx. 1.5cm pieces) to achieve the perfect result.

4. Adding ingredients:
   After pouring the liquid, add ingredients to the rest of the beverage to 60% of the volume of the bottle
   and blend!

5. Run the FitStream:
   Close the bottle, press the button and your favorite drink will be ready within a few seconds.

6. Maximum power:
   To achieve maximum performance, you can run the FitStream upside down and allow the blades to reach their full speed before mixing.

7. The FitStream sieve contains a filter:
   a perforated sieve to enjoy the drinks without larger pieces.

8. Cleaning is easy and simple:
   Just pour water, add a drop of detergent, run and rinse.

9. Thorough cleaning:
   Open the lid, remove sieve and bottle from the base. Remove the silicone rings and rinse all parts in water with the supplied brush. When rinsing, make sure that the water does not reach the power connector at the base. Repeat the thorough cleaning periodically.

10. Dry out:
    Clean the FitStream and allow it to dry completely.

11. Great recipes:
    Visit our www.FitStream.eu site and try our tips for great drinks – over 50 recipes!

HELPFUL HINTS

1. Red light during mixing:
   If the red light is lit during mixing, the motor is stuck. If the blades are jammed, simply turn the blender upside down, shake it quickly and turn on. Then turn it back to make your ingredients come across all 6 blades at full speed.

2. Red and blue flashing light:
   Red and blue flashing light means that the bottle is poorly tightened to the base. To fix this problem, tighten the bottle in a clockwise direction until the arrow on the bottle is pointing to the power button on the base. For safety reasons, the glass has magnets that must be aligned, otherwise the blades do not spin.

3. Continuous red light:
   When you need to recharge the FitStream, the light turns red. Charge the blender via the USB-C power connector on the base. Use an attached USB cable with any USB network adapter, such as one for a mobile phone. We recommend charging for 3 hours. When fully charged, the light turns blue.

4. Green light during mixing:
   If the green light turns on during mixing, the automatic shut-off system is deactivated and the mixer must be restarted by turning the power switch off and on.

5. Never overfill:
   Never fill the FitStream with ingredients up to the top of the jar. The blender is designed for mixing fruit or making mixed drinks. It is not intended for chopping meat, nuts or legumes. Please respect the performance of a portable battery blender, it’s not a “Superman mixer”. However, you can take it anywhere and enjoy your favorite fresh drink anytime!

6. Fluid leakage:
   In the case of leakage of the contents of the bottle, it is necessary to open the cap, clean the silicone seal and again close the bottle cap.

WARNINGS

Follow the instructions to reduce the risk of fire, electric shock and damage:
Do not run the device until the lid is closed tight.
Do not run the device until liquid is added.
Do not run the device when empty in order to avoid damaging the blender motor.
Never fill the device with liquid with temperature above 50°C.
Use only recommended accessories. You must never repair this device yourself. If required, please contact us. Do not throw any metal objects into the device.
Never insert fingers into the bottle when the motor is switched on.
Do not use a damaged electrical outlet for charging the device. Place the device on a dry, flat, waterproof and heat-resistant surface.
Keep your device out of the reach of children and people with mental disability.
Do not expose the device to direct sunlight, high temperatures, excessive humidity and excessive shocks. Remodeling or modification of the product is prohibited and has an impact on the safety of the product. Attention, danger of injury! Handle the product with care.
An impact or fall from a height may damage the product and result in a subsequent loss of the warranty. The two-year warranty does not cover mechanical damage to the device. Use the device solely as instructed to meet the warranty conditions and prevent injury.

DISPOSAL

DECLARATION OF CONFORMITY
Importer: FITSTREAM s.r.o., Valentiniánova 8, 851 10 Bratislava, Slovakia Manufacturer: Shenzhen ROCA MOND Tech. Co. LTD, Bantian Town No.2, 518000 Shenzhen, China 2014/30/EU 2011/65/EU ****www.FitStream.eu

Documents / Resources

| FITSTREAM 1675679 E1 Yellow Portable USB-C Charging Mixer [pdf] User Manual
1675679 E1 Yellow Portable USB-C Charging Mixer, 1675679 E1, Yellow Portable USB-C Charging Mixer, Portable USB-C Charging Mixer, USB-C Charging Mixer, Charging Mixer, Mixer
---|---

References

• Urob si svoj čerstvý nápoj kdekoľvek | FitStream

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>