certainteed Low Slope Roofing

Product Information

Specifications:

• Product Types: Residential Roofing, Commercial Roofing, Solar, Roofing Accessories
• Materials: Asphalt-based roof systems, roof restoration products
• Support: Professional live support in the United States and Canada
• Technical Services: Available Monday through Friday, 8:30 AM to 5:00 PM, Eastern Standard Time
• Warranty: Strong warranty backing

Product Usage Instructions

Residential Roofing:

For residential roofing projects, ensure to select the appropriate asphalt- based roof systems based on performance needs. Consider using CertainTeed’s comprehensive line of products for quality assurance.

Commercial Roofing:

When working on commercial roofing projects, utilize the range of low-slope accessories including primers, adhesives, insulation, repair solutions, liquid flashing, and edge metal. Consult with CertainTeed’s technical services for guidance.

Solar:

For solar applications, ensure compatibility with CertainTeed roofing products to maintain the integrity of the roof system. Seek professional support for installation and maintenance.

Product Selection Guide:

Refer to the Product Selection Guide to understand the correlation between the products and the anatomy of a low-slope roof system. Follow the guide for the correct order of product utilization.

FAQs

• Q: How do I select the right roofing materials for my project?
  • A: Consider the performance needs of your project and consult CertainTeed’s product selection guide for recommendations on suitable materials.
• Q: Is professional support available for installation and maintenance?
  • A: Yes, CertainTeed offers professional live support in the United States and Canada for order, delivery, installation, and maintenance assistance.

With a portfolio of commercial and residential roofing products and quality standards that lead the industry, you can rest easy knowing CertainTeed has you covered.

Residential

Solar

Residential Accessories Commercial

Product Selection Guide
Low-Slope Roofing

Commercial Accessories

Liquid-Applied Roofing

CertainTeed
CEILINGS · GYPSUM · INSULATION · ROOFING · SIdING · TRIM 20 Moores Road, Malvern, PA 19355 Professional: 800-233-8990 Consumer: 800-782-8777

certainteed.com ©01/24 CertainTeed, Printed in the USA, Code No. 01-00-263-NA- EN

Asset Protection and Continuity of Service
A roof is an assurance policy.
In most cases, building owners aren’t concerned with the particular material their roof is made out of, as long as it performs. The function of a roof is to protect what’s inside the building ­ the structure, its contents and occupants. The roof shields a building from damage to these assets. What building owners are really looking for is performance. They’re looking for durability. Warranties cover leak repair, not asset damage or disruption of service. Every investment decision an owner makes should include an understanding of needs and weighing the value of price versus risk.
Your reputation is on the line.
Where does the finger point when a roof leaks? The roofing contractor. Statistics show that faulty installation is the primary cause of roof leaks. That means, regardless of the leak source, your relationship with your customer and your reputation are on the line with each installation. You’re not just in the roofing business, you’re in the “Asset Protection & Continuity of Service” business.
A portfolio of quality roofing materials.
CertainTeed offers a complete line of asphalt-based roof systems and roof restoration products including: BUR (non-modified asphalt or built-up roofing), SBS and APP-modified systems, silicone and acrylic liquid-applied roofing systems, complemented by comprehensive low-slope accessories including primers, adhesives, insulation, repair solutions, liquid flashing and edge metal. You can recommend the right solution for your customer based on their performance needs.

Support
We are equally committed to manufacturing consistent, quality products to protect your assets and supporting their order, delivery, installation and maintenance. CertainTeed offers professional, live support in the United States and Canada.
Commercial Roofing General Support
Monday through Friday from 7:00 AM to 6:30 PM, Eastern Standard Time. NORTH EAST ­ Lake Central, North East, & Mid-Atlantic Phone: 800-537-2974 / Fax: 800-279-9450 / Email: ctrpgcsnortheast @saint-gobain.com SOUTH ATLANTIC / SOUTH EAST Phone: 800-334-6639 / Fax: 800-345-2641 / Email: ctrpgcssoutheast @saint-gobain.com WEST ­ North West & South West Phone: 800-238-0958 / Fax: 800-790-3347 / Email: ctrpgcswest @saint-gobain.com CENTRAL ­ North Central and South Central Phone: 800-999-5150 / Fax: 800-999-5350 / Email: ctrpgcscentral @saint-gobain.com CANAdA Phone: 888-240-0542 / Fax: 610-254-5423 / Email: roofordersCA @saint-gobain.com

Canada

West

Central

North East
South East/ South Atlantic

Commercial Roofing Technical Services
CertainTeed has a team of seasoned low-slope professionals available for technical support Monday through Friday, 8:30 AM to 5:00 PM, Eastern Standard Time. Phone: 800-396-8134 ext. 2 rpg @saint-gobain.com

Joe Knows Commercial Roofing
You should too!

1

One Brand One Warranty

CertainTeed offers a comprehensive selection of high-quality roofing products needed to complete and maintain the entire roof system with confidence.
Through the responsible development of innovative and sustainable building products, CertainTeed has helped shape the building products industry for more than 115 years. We start with the highest-quality raw materials and add state- of-the art technology to monitor our manufacturing processes and test our finished products. The result is superior performance from beginning to end, backed by one of the strongest warranties in the industry.

INSULATION AND COVER BOARD

FlintBoard®

FlintBoard roof insulation slows the flow of heat into and out of the building through the roof deck, reducing energy costs for building owners as well as thermal strain to the roof system.
FlintBoard closed-cell polyisocyanurate insulation board offers the highest R-value (resistance to heat flow) per inch available and long-term thermal resistance values (LTTR) from 5.7 to 27, LTTR. FlintBoard HD (High Density) may also serve as a lighter weight cover board, as compared to more traditional gypsum-based options.
· Dimensionally stable and suitable for almost any climate
· Lightweight for easy handling and installation
· Engineered for use with built-up and modified asphalt roof systems, shingles, tile and slate
· Passes the strictest fire performance tests, having earned FM 4470 Class 1 and UL 1256 ratings; ASTM C1289, see Technical Data Sheets for code compliance information
LTTR is the industry standard method for calculating the 15-year time-weighted average for roof insulation.
Tapered Design Services
CertainTeed offers takeoff, technical and design services to remove complications from the bid process. Standard and extended panels are available.

Vapor barriers are sometimes specified beneath insulation in a low-slope roof system to prevent moisture from within the building penetrating the roof system. All CertainTeed Flintlastic membranes may be utilized as vapor barriers when fully adhered.

Product FlintBoard ISO/ISO-T (T=Tapered)
FlintBoard ISO Cold/ ISO-T Cold (T=Tapered)
FlintBoard ISO NB
FlintBoard ISO Cv
FlintBoard ISO Pre-Cut Crickets
FlintBoard ISO HD Cover Board
Hinged Target Sump

description
Workhorse product features heavy, black (non-asphaltic), organic fiber- reinforced felt facers. 4’x4′ (standard or tapered), 4’x8′
Features heavy-duty inorganic glass-reinforced facers for improved dimensional stability, ideal for cold-applied adhesive applications 4’x4′ (standard or tapered), 4’x8′
Features foam core laminated to 7/16″, 5/8″ or 3/4″ OSB or plywood, fiber- reinforced felt facer on bottom surface- eliminates the need for additional wood decking. 4’x4′, 4’x8′
Features foam core with 1″, 1.5″ or 2″ ventilation channels bonded to 7/16″, 5/8″ or 3/4″ OSB or plywood, fiber-reinforced felt facer on bottom surface- excellent for sloped, unvented roof decks. 4’x8′
Provides a standardized pre-fabricated cricket solution to promote positive drainage Unfolds to 12’x4′, 1/4″:12 and 1/2″:12 slopes
Lightweight (11 lbs per 4’x8′ panel), quicker to install than heavier gypsum- based boards, high density polyiso insulation designed for use as a cover board. 4’x4′, 4’x8′
Save 74% in material and waste costs over field fabricated sumps when installing drains. Manufactured with FlintBoard ISO Cold 25 psi.

Joe Knows Commercial Roofing
You should too! Watch installation.

4

INSULATION ADHESIvES, TOOLS & ACCESSORIES

Millennium

CertainTeed offers a variety of roof insulation adhesives to decrease labor and eliminate the potential for thermal bridging without compromising a strong, durable bond. Insulation adhesive is designed for use with 4’x4′ FlintBoard® insulation panels.

Material

Millennium One StepTM Foamable Adhesive
Polyurethane Foam

Millennium One Step Green® Foamable Adhesive
Polyurethane Foam (45% renewable content)

Millennium PG-1 Low Viscosity Adhesive
Polyurethane Foam

Temperature Install Time Packaging

No Minimum None ­ Immediate installation
1.5 liter cartridges

40°F and Rising Before Skinning 5G, 15G, 50G

Application

Manual Battery Powered Single Bead, Multi-Bead Applicator, Pneumatic Applicator

Cyclone

Millennium PG-1 EF ECO
Polyurethane Foam (No High GWP Propellants)
40°F and Rising
Before Skinning
43 lb. and 49 lb. Canisters
Hoses and Nozzles Included in Set

Millennium One Step Advantages
· Precise 1:1 application ratio every time · Consistent adhesive in varying temperature or humidity · No temperature restrictions ­ one year round formula · Will not suffer from foam collapse · High viscosity = wider footprint and stronger bond · Labor saving – boards go down immediately · Essentially VOC free and solvent free · No chance of overspray ­ no respirator needed

Battery Powered Applicator (One Step)

Multi-Bead Applicator

Cyclone Applicator

(One Step) (Pump Grade)

5

ASPHALTIC MEMBRANE PRIMER

FlintPrime® QD (Quick Dry)

Why Prime?
Primer is used to increase adhesion of the membrane to certain substrates, where the membrane will be applied directly to the substrate (not mechanically attached). Enhance adhesion, wind uplift resistance and long-term performance of BUR and modified bitumen roof systems with FlintPrime QD.

Product
FlintPrime QD FlintPrime QD
FlintPrime Aerosol

Color
Black Black
Black

Packaging
1G 5G
15 oz.

Units/Pallet
150 48
960 (80 cartons, 12 cans each)

Yield/Unit
100-200 sq. ft. 500-1,000 sq. ft.
30-40 sq. ft.

FlintPrime QD
FlintPrime QD is a solvent-based, highly penetrating, quick-dry asphaltic primer designed to promote adhesion when installing self-adhered modified bitumen base sheets and/or those applied by torch, cold adhesive or hot asphalt.

FlintPrime Aerosol
FlintPrime Aerosol is valued by contractors for metal construction
detail surface preparation.

Joe Knows Commercial Roofing
You should too! Watch for when to use with Flintlastic SA

TIP: Top load CertainTeed asphaltic primers and adhesives on full truckloads for no additional freight. Full pallet orders not required.

6

ASPHALTIC MEMBRANE FLASHING/ADHESIvE
FlintBond®
Seal your SBS-modified roof system watertight with FlintBond SBS-Modified Adhesive, available in brush, trowel and caulk grades. FlintBond is a professional-grade, cold-applied adhesive manufactured using premium asphalt, rubber, solvent and fibers.

FlintBond Caulk
Small construction details and flashing seams

FlintBond Trowel
Construction details such as endlaps and edge metal

FlintBond Brush
Small to large low-slope applications, for field membranes

Product
Caulk
Trowel Trowel
Brush

Color
Black
Black Black
Black

Packaging
10.1 oz.
3G 5G
5G

Units/Pallet
576 (48 cartons)
64 48
48

Yield/Unit
24 linear ft (1/4″ bead)
36-39 sq. ft. 60-65 sq. t
330-500 sq. ft.

· Superior bond in field and laps · Pliable in cold temperatures · Excellent elongation/recovery · Meets or exceeds ASTM D3019, Type III and ASTM D4479, Type I · UL Listed · Miami-Dade approved

Joe Knows Commercial Roofing
You should too! Watch for using FlintBond for Flintlastic SA Endlaps.

Millennium Hurricane Force®
1-Part Adhesives are highly elastomeric, one-part asphalt modified urethane adhesives that is solvent free and does not require mixing.

Product

Packaging Units/Pallet Yield

Membrane 5G

36

Adhesive

300­500 sq. ft.

Flashing

5G

36

Adhesive

60-75 sq. ft.

7

ASPHALTIC MEMBRANES

Understanding Products and Systems

Low-slope roofing products come together to form a low-slope roofing system.
CertainTeed offers a range of roll good and liquid-applied products, which equate to hundreds of system configurations, specification and restoration options. In an effort to simplify system selection, this Product Selection Guide highlights our recommended systems by application, their value, and individual product benefits.
Asphaltic Products & Systems
Asphaltic products and systems have five main components for differentiation:
8

Material
CertainTeed offers non-modified and polymer-modified bituminous (asphalt- based) roll goods. Non-modified asphalt products are categorized as built-up roofing (BUR). These products are permeable so that hot asphalt can flow through the product as layers are “built up” on the roof, resulting in a relatively thick, watertight roof system. APP-modified products are manufactured with atactic polypropyleneinfused asphalt which increases material strength and toughness, especially in high Uv areas. SBS-modified products are manufactured with styrene-butadiene-styrene infused asphalt which increases flexibility, especially in low temperatures. Roof systems may consist of one or multiple materials depending on the desired performance, warranty, and cost.
Reinforcement
Reinforcement mats serve as the structure to asphaltic low-slope roll goods. They are saturated and coated with non-modified or modified asphalt. CertainTeed offers low-slope products with either fiberglass mat or polyester mat at varying thicknesses.
Fiberglass stands up well to heat and tension. Its inherently high melting point affords superior fire resistance when combined with a fire-retardant asphalt formulation. Fiberglass-reinforced products applied in hot asphalt retain excellent dimensional stability. Additionally, fiberglass has superior tensile strength. When combined with SBS-modified asphalt, the sheets will resist roof movement until the stress absorbed in the mat forces a break.
Polyester’s predominant benefits are puncture resistance and high elongation. Polyester products handle rooftop foot traffic better. They can also cyclically absorb the strain of building movement and return back to their original dimension.

Additives
In addition to the modification of asphalt with APP or SBS polymers, CertainTeed blends certain products with additives to further enhance desired performance characteristics.
“FR” products, for example, are manufactured with proprietary additives to increase fire-resistance.

Warranty
The driving factor for system selection is most often warranty duration. CertainTeed offers system dependent, standard warranty durations between ten and twenty-five years. Additionally, Star Contractors can increase warranty durations 25% by engaging in an Integrity Maintenance Contract with their client.
CertainTeed offers three asphaltic membrane warranty options: Asphaltic Membrane Limited Warranty on Materials Integrity Roof System Limited Warranty Integrity Roof System No dollar Limit (NdL) Limited Warranty See Product and System Guarantee section for more details.

Application
Low-slope bituminous products are installed utilizing one of five methods:
· Mechanical Fastening · Mopped with Hot Asphalt · Applied with Cold Adhesive · Torch-Welded · Self-Adhered
This Selection Guide categorizes products and systems by application method, though some systems utilize multiple methods and some products can be installed in a variety of ways. Each application method has benefits and limitations:

Fasteners
Hot Asphalt
Cold Adhesive Torch
Self-Adhered

Benefit
Fast installation, allows the product to move with the roof.
Proven, durable, cost-effective material.
No kettle, minimal tools, very good adhesion when applied correctly.
Faster than hot asphalt or cold adhesive, very good adhesion when applied correctly.
Faster to train labor and install, very good adhesion when applied correctly. No fumes, no kettle, no burn/fire risk.

Limitation
Penetrations allow water incursion; method is only feasible for base/anchor sheets.
Fumes/odor, burn-risk, cost and availability of trained labor and equipment.
Takes up to 60 days to cure, high fumes, relatively high price for material.
Risk of burn/fire; risk of improper application; cost and availability of trained labor, cost of propane.
Not yet widely commercially accepted, application can be temperature dependent.

9

ASPHALTIC MEMBRANES

Selecting Base/Ply Sheets
Select the base and/or sheet that best fits your needs. The following should be considered when selecting a base and/or sheet for your project:
Why ply? A third layer, or more, of water protection exponentially decreases the leak risk of any roof system. That said, interply or ply sheets are not a required element of every low-slope bituminous roof system. Interply sheets are often specified in order to obtain an extended warranty durations or to comply with a fire or wind uplift rating.
Application
All base sheets can be mechanically fastened, if required, to support a nailable roof deck. If the roof deck is not nailable (or insulation/coverboard has been installed and is now the surface to which the base sheet will be applied) the base sheet’s application options become of greater consideration. The charts on the following pages detail the range of base sheet application options and associated performance features.
All CertainTeed base sheets, with the exception of Flintlastic SA NailBase, can be utilized as interply (ply) sheets. Some contractors prefer to limit the number of materials on a project and, therefore, choose to install a base and ply layer of the same material. Other considerations are described below.
Building Fire/Wind Requirements
Projects requiring a specific fire or wind uplift resistance rating may call for a specific base or ply sheet to be incorporated into the system. Contact CertainTeed Commercial Roofing Technical Services at 800-396-8134 x2 for system selection assistance.
Cap Sheet Application
Another element to consider when selecting a base sheet is the cap sheet. CertainTeed offers one base sheet that must be correlated with specific cap sheet applications, as well as two cap sheets that must be correlated with specific base sheets:
Black diamond® Base Sheet is a two-square, SBS-modified, fiberglass reinforced self-adhered base sheet, but requires heat to create an ideal short-term bond. As such, Black Diamond Base Sheet is only an option if the cap sheet is installed with hot asphalt or torch-applied. Black Diamond is a go-to base sheet for staged construction as it’s namesake slag top surface can be left exposed for up to 6 months!
Flintlastic® SA Cap and Flintlastic SA Cap FR are one-square, SBS-modified, polyester (SA Cap) and fiberglass (SA Cap FR) reinforced, self-adhered cap sheets. The Flintlastic SA family is engineered to be installed together. As such, the selection of either cap sheet dictates that either Flintlastic SA NailBase (for nailable substrates), Flintlastic SA PlyBase (for non-nailable substrates), or Flintlastic SA MidPly (high performing base/ply for non- nailable substrates) will be utilized.

Selecting Cap Sheets
Select the cap sheet that best fits your needs. The following should be considered when selecting a cap sheet for your project: Cap Sheet Application
Application method is frequently the primary driver of cap sheet product selection. The charts on the following pages detail which CertainTeed cap sheets can be installed with hot asphalt, cold adhesive, torch or factory applied self-adhesive and the performance features each application method delivers.
Building Fire/Wind Requirements
Projects requiring a specific fire or wind uplift resistance rating call for each element of the roof system to be prioritized, as the system is granted these performance approvals, not the singular component. CertainTeed has preapproved systems within various code and compliance bodies (i.e. UL, FM, Miami-Dade). Contact CertainTeed Commercial Roofing Technical Services at 800-396-8134 x2 for system selection assistance.
TIP: Flintlastic® SA Cap FR offers the speed, safety and fume-free benefits of self-adhering technology as well as the ability to obtain Class A Fire Resistance and Class Iv Impact Resistance.
Cap Sheet Surfacing & Reflectivity
With the exception of Flintlastic STA and Flintlastic STA Plus, all of CertainTeed’s cap sheets are surfaced with granules which provide Uv protection and aesthetic appeal. CertainTeed low-slope granule blends are designed and manufactured with a true blend multi-granule mix to complement our most popular shingle colors, allowing for a uniform transition from steep to low-slope roofs on a single property.
CertainTeed does not stock all cap sheets in every color. Some colors are made-to-order or are not available depending on product. Please refer to the cap sheet color chart for product availability on page 26-27.
Most CertainTeed cap sheets are available with CoolStar®, highly reflective surfacing. CoolStar cap sheets are sold at a premium price.

10

11

ASPHALTIC MEMBRANES ­ SELF-ADHERED

Recommended Systems Self-Adhered
Why Self-Adhered? No fumes. No flame. No disturbance. For a fraction of the labor, proven.

Warranty duration Insulation

SYSTEM ANATOMY

Base

Interply

CLASSIC SELF-ADHERED SYSTEMS

12 Years

Optional

Flintlastic SA NailBase (MF)

—

15 Years 20 Years

Optional

Flintlastic SA PlyBase4 (SA)

—

Optional

Flintlastic SA MidPly4,5 (SA)

—

25 Years

Double layer,

Flintlastic SA MidPly (SA)

—

second layer adhered

Cap
Flintlastic SA Cap (CoolStar2)
Flintlastic SA Cap (CoolStar2)
Flintlastic SA Cap (CoolStar2)
Flintlastic SA Cap (CoolStar2)

Class 4 Impact Resistance

CertainTeed’s Flintlastic® SA family of products afford contractors and building owners alike the benefits of a self-adhered system, with the performance of traditional bituminous applications. Flintlastic SA base and ply products have proprietary surface treatments engineered for strong, long- term bonds with watertight, high uplift resistance. Our self-adhered cap products come in a variety of true-blend colors that complement popular CertainTeed shingles, and a highly-reflective CoolStar® solution.

LFpreeerafekozrper/moTathneaccteiwon3 sSttraoblneg, dimensionally Pwlieaatblheeirn cold Fire resistant3 rQeudiucck iendsltaalbloartion/ aRnesdiliUeVntrtayoshigh heat Easy to repair Solar reflectivity1

Class A Fire Resistance

SYSTEM VALUE

details

Good Performance Better Performance Best Performance

Flintlastic SA NailBase, while not a self-adhered product, uses a proprietary top surface blue film that promotes an excellent inner-system bond with Flintlastic SA Cap.
True two-ply protection with a fully adhered base and cap.
Flintlastic SA MidPly is manufactured with 51% more asphalt than Flintlastic SA PlyBase and a heavy duty fiberglass reinforcement mat.
CertainTeed’s best two-ply asset protection; fully adhered insulation eliminates thermal bridging through fasteners.

SYSTEM ANATOMY

Warranty duration Base (Loose Laid)

Base

Interply

Cap

CLASS A/CLASS IV1 IMPACT RESISTANT SELF-ADHERED SYSTEMS ON COMBUSTIBLE DECKS

12 Years1

GlasbaseTM Base Sheet Flintlastic SA NailBase

15 Years1

Glasbase Base Sheet Flintlastic SA NailBase

20 Years1

Glasbase Base Sheet Flintlastic SA NailBase

—
Flintlastic SA PlyBase
Flintlastic SA MidPly

Flintlastic SA Cap FR (CoolStar)
Flintlastic SA Cap FR (CoolStar)
Flintlastic SA Cap FR (CoolStar)

1 Refer to www.certainteed.com/pro-center/roofing-approvals-compliances/for listings 2 CoolStar surfacing must be selected for highest solar reflectivity. 3 Performance assumes proper roof maintenance. See warranty for details. 4 When self-adhering a base layer over wood decks, priming is recommended. Self- adhering over wood decks is not permitted by code in Miami-Dade County;
check your local building code. At the end of the roofing membrane’s life, roofing membranes self-adhered over wood decks will require replacement of the deck. Self-adhering to resinous wood, such as pine, is prohibited. Roof systems with base sheets self-adhered directly to wood roof decks quality for Integrity Roof System Limited Warranties only; Integrity Roof System NDL Limited Warranties and Sure StartTM Plus 5-Star Warranties require the use of Flintlastic SA NailBase as a base sheet.
12 5 CoolStar surfacing must be selected for highest solar reflectivity.

In all three systems, Glasbase Base Sheet is loose laid and gang fastened with Flintlastic SA NailBase to the roof deck. Warranty durations increase as watertight interply protection increases from none to Flintlastic SA PlyBase to Flintlastic SA MidPly. Flintlastic SA MidPly is manufactured with 51% more asphalt than Flintlastic SA PlyBase and a heavy duty fiberglass reinforced mat.
13

ASPHALTIC MEMBRANES ­ SELF-ADHERED

Base/Ply Sheets Self-Adhered

Product Application Material Thickness

Flintlastic® SA MF NailBase2

SBS/FG 1.5 mm (59 mils)

Weight 82 lbs.

Coverage 200 sq ft

ASTM
D4601, Type II

Why Buy?1
When utilizing Flintlastic SA Cap (FR) on nailable substrate.

Flintlastic SA SA PlyBase

SBS/FG 1.5 mm (59 mils)

86 lbs.

200 sq ft

D4601, Type II, D1970

When utilizing Flintlastic SA Cap (FR) on approved substrates where direct adhesion is allowed and an unpenetrated membrane is desired.

Flintlastic SA SA MidPly

SBS/FG 2.8 mm (110 mils)

63 lbs.

100 sq ft

D6163, Grade S, Type I, D1970

CertainTeed’s unique, most robust self-adhering base for fully self-adhered systems. When utilizing Flintlastic SA Cap (FR) on approved substrates where direct adhesion is allowed and an unpenetrated membrane is desired. Value: a 25-year warranty with two plies

Black

SA

Diamond®

Base Sheet

SBS/FG 1.4 mm (55 mils)

78 lbs.

200 sq ft

D4601, Type I, D1970

When utilizing torch or hot-applied cap sheet on approved substrates where direct adhesion is allowed and an unpenetrated membrane is desired. Value: expedited installation and up to 6 months exposure

Flintlastic

SA

Ultra Glass

SA

SBS/FG 3.0 mm (118 mils)

72 lbs.

100 sq ft

D6163, Grade S, Type I, D1970

CertainTeed’s unique, most robust, self-adhering base when utilizing non-self- adhered cap sheet on approved substrates where direct adhesion is allowed and an unpenetrated membrane is desired. Value: expedited installation and extended warranty durations (100% more asphalt per square than Black Diamond Base Sheet and a 70% heavier fiberglass mat)

1 In addition to product values listed above, base sheet selection will be influenced by CertainTeed system approvals for fire performance and/or wind uplift resistance. 2 Flintlastic SA NailBase is listed as a self-adhering base sheet because it is only paired with Flintlastic SA systems, though NailBase is utilized as the mechanically fastened
solution when the SA system is being installed on a nailable roof deck and an anchor sheet is desired (recommended).

14

Cap Sheets Self-Adhered

Product Application Material Thickness Weight Coverage ASTM Why Buy?1

Flintlastic® SA SA Cap

SBS/POLY 4.0 mm (157 mils)

95 lbs.

100 sq ft

D6164, Grade G, Type I, D7505,
D1970

Tried and true modified bitumen performance with significantly reduced labor over torch, hot asphalt or cold adhesive applications. No fumes, no kettle, no flame, no disruption.

Flintlastic SA SA Cap CoolStar®

SBS/POLY

4.0 mm (157 mils)

93.5 lbs. 100 sq ft

D6164, Grade G, Type I, D7505

See “Flintlastic SA Cap” plus highly reflective. Reduces thermal heat gain, improving building comfort and reducing energy cost.

Flintlastic SA SA Cap FR

SBS/FG

3.2 mm (126 mils)

88 lbs.

100 sq ft

D6163, Grade G, Type I, UL 2218 Class 4, D7530

See “Flintlastic SA Cap” plus fiberglass reinforcement mat allows for improved dimensional stability. Option to be incorporated in Class A2 fire rated system and achieve Class Iv Impact Resistance.

Flintlastic SA SA Cap FR CoolStar

SBS/FG

3.2 mm (126 mils)

88.5 lbs.

100 sq ft

D6163 Grade G, Type 1, UL 2218 Class 4, D7530

See “Flintlastic SA Cap FR” plus highly reflective. Reduces thermal heat gain, improving building comfort and reducing energy cost.

1 In addition to product values listed above, cap sheet selection will be influenced by CertainTeed system approvals for fire performance and/or wind uplift resistance. 2 Please visit iq.ulprospector.com and review CertainTeed’s Roof Systems TGFU.R11656 for deck type and slope requirements.

Arctic EdgeTM Flintlastic SA Cold Lap Tape
Arctic Edge is a revolutionary, use-as-needed, auxiliary tape engineered to significantly boost Flintlastic SA adhesion in temperatures as low as 35°F. (4″ X 260′ per roll, 8 rolls per carton) Approximately enough tape to adhere four rolls of Flintlastic SA PlyBase or eight rolls of Flintlastic SA MidPly, SA Cap, SA Cap FR.

Learn more.

15

ASPHALTIC MEMBRANES ­ TORCH

Recommended Systems Torch-APP
Why Torch? Because fire beats water.

Warranty duration 12 Years

Insulation Optional

12 Years

Optional

MF Mechanically Fastened / T Torch HA Hot Asphalt / CA Cold Adhesive / SA Self-Adhered

SYSTEM ANATOMY

Base

Ply

Cap

GlasbaseTM Base Sheet (MF)

—

Flintlastic® STA with SMARTCOATTM

All Weather/Empire®

—

Base (MF)

Flintlastic GTA (CoolStar®2)

15 Years, approved for re-cover 20 Years
25 Years
25 Years
25 Years

Optional

All Weather/Empire Base (MF)

Optional
Double layer, second layer adhered
Optional
Double layer, second layer
adhered

Black Diamond® Base Sheet1 (SA)
Flintlastic Ultra Glass SA (SA)
All Weather/Empire Base Sheet (MF)
Black Diamond Base Sheet (SA)

—
— — Flintlastic STA Plus Flintlastic STA

Flintlastic STA Plus5, Flintlastic GTA-FR
(CoolStar2)
Flintlastic STA Plus5, Flintlastic GTA-FR (CoolStar2)
Flintlastic GTA­FR (CoolStar2)
Flintlastic GTA (CoolStar2)
Flintlastic GTA­FR (CoolStar2)

1 When self-adhering a base layer over wood decks, priming is recommended. Self-adhering over wood decks is not permitted by code in Miami-Dade County; check your local building code. At the end of the roofing membrane’s life, roofing membranes self-adhered over wood decks will require replacement of the deck. Self-adhering to resinous wood, such as pine, is prohibited. Roof systems with base sheets self-adhered directly to wood roof decks quality for Integrity Roof System Limited Warranties only; Integrity Roof System NDL Limited Warranties and Sure StartTM Plus 5-Star Warranties require the use of Flintlastic SA NailBase as a base sheet. 2 CoolStar surfacing must be selected for highest solar reflectivity. Premium pricing applies. 3 Performance assumes proper roof maintenance. See warranty for details. 4 iq.ulprospector.com, CertainTeed’s Roof Systems TGFU.R11656, Fully Adhered; review listing for deck type and slope requirements. 5 Requires coating of SMARTCOATTM; proof of recoat required in year 10.

Leak protection3 FPreerfeozre/mTahnacew sSttraoblneg, dimensionally Pwlieaatblheeirn cold Fire resistant4 rQeudiucckeindsltaalbloartion/ aRnesdiliUeVntratyoshigh heat Easy to repair Solar reflectivity2

Torch-down roofing technology has only strengthened since first coming on the scene in the 1970’s. CertainTeed modifies roofing asphalt with plasticizing atactic polypropylene (APP) polymers to enhance product toughness, especially in environments with elevated Uv exposure. These APP modified bitumen products are staples of the torch roofing community, especially in the West and South. Ask any experienced roofing contractor, and they will tell you that a properly installed, high-quality torch system creates a multi-layered barrier that will protect a building for decades to come.

SYSTEM VALUE

details

Good Performance Better Performance Best Performance

Smooth-surfaced economical system; installs quickly with a granule-free, forgiving selvage edge.

Economical, stable, resilient. For increased water protection during installation, upgrade to APP Base T (MF) and heat weld the lap joints.

Tear off not in the budget? Resilient recover options.

Black Diamond Base Sheet is lightweight, fast to apply, and can serve as a temporary roof for up to six months.
Same labor savings as Black Diamond Base Sheet with 100% more asphalt and 70% heavier fiberglass reinforcement.
Twenty-five year warranted system that does not require insulation- excellent option for combustible decks.
Expedited base installation (self-adhered) and enhanced asset protection with three plies of staggered, watertight seams.

16

17

ASPHALTIC MEMBRANES ­ TORCH
Recommended Systems Torch-SBS
Why Torch? Because fire beats water.

Warranty duration 20 Years

Insulation Optional

MF Mechanically Fastened / T Torch HA Hot Asphalt / CA Cold Adhesive / SA Self-Adhered

SYSTEM ANATOMY

Base

Ply

Cap

Black Diamond

—

Base Sheet3 (SA)

Flintlastic GTS-FR CoolStar2

20 Years 25 Years

Optional

Glasbase Base Sheet

Double layer, second layer adhered

Flintlastic Ultra Glass SA

Flintlastic Base 20 T
—

Flintlastic GTS-FR (CoolStar2)
Flintlastic GTS­FR (CoolStar2)

25 Years

Double layer,

Flintlastic Ultra

—

second layer

Poly SMS (T/HA)

adhered5

Flintlastic GTS­FR (CoolStar2)

1 For systems listed with torch-grade or self-adhered base plies without insulation, add a base sheet such as Glasbase Base Sheet or All Weather/Empire Base Sheet for nailable decks. 2 CoolStar surfacing must be selected for highest solar reflectivity. Premium pricing applies. 3 When self-adhering a base layer over wood decks, priming is recommended. Self-adhering over wood decks is not permitted by code in Miami-Dade County; check your local building code. At the end of the roofing membrane’s life, roofing membranes self- adhered over wood decks will require replacement of the deck. Self-adhering to resinous wood, such as pine, is prohibited. Roof systems with base sheets self-adhered directly to wood roof decks quality for Integrity Roof System Limited Warranties only; Integrity Roof System NDL Limited Warranties and Sure StartTM Plus 5-Star Warranties require the use of Flintlastic SA NailBase as a base sheet.

Torch-down roofing technology has only strengthened since first coming on the scene in the 1970’s. CertainTeed modifies roofing asphalt with rubberizing styrene butadiene styrene (SBS) polymers to enhance product resilience and pliability, especially in cold temperatures. These SBS modified bitumen products are staples of the torch roofing community, especially in northern regions. Ask any experienced roofing contractor, and they will tell you that a properly installed, high-quality torch system creates a multi-layered barrier that will protect a building for decades to come.

SYSTEM VALUE

Leak protection3 FPreerfeozre/mTahnacew sSttraoblneg, dimensionally Pwlieaatblheeirn cold Fire resistant4 rQeudiucckeindsltaalbloartion/ aRnesdiliUeVntratyoshigh heat Easy to repair Solar reflectivity2

details

Good Performance Better Performance Best Performance

Self-adhered base offers increased application speed; polyester-reinforced ASTM D6164 Type II cap membrane delivers excellent durability and resilience.

Improved durability and resilience over “20/30” system with polyester- reinforced ASTM D6164 Type II cap membrane.

25 year warranty duration with only two plies, self-adhered base offers increased application speed, polyester-reinforced, ASTM D6164 Type II cap membrane delivers excellent durability and resilience

25 year warranty duration with only two plies, gypsum board is permitted as second layer of roof insulation for torch-applied base.

3 Performance assumes proper roof maintenance. See warranty for details. 4 iq.ulprospector.com, CertainTeed’s Roof Systems TGFU.R11656, Fully Adhered; review listing for deck type and slope requirements. 5 Base sheet is torch- applied. Second or third layer layer of insulation must be gypsum board.

18

19

ASPHALTIC MEMBRANES ­ TORCH

Base/Ply Sheets Torch

Product Application Material Thickness

Flintlastic

T

APP Base T

APP/FG 2.0 mm (79 mils)

Weight 97 lbs.

Coverage 200 sq ft

ASTM D6509

Why Buy?1
Economical option for strong, homogenous (APP to APP) system when utilizing an APP-modified cap sheet.

Flintlastic STA

T

APP/POLY 3.8 mm 86 lbs. 100 sq ft D6222, Utilizing APP-modified cap sheet, value

(150 mils)

Grade S, benefit of strong, homogenous (APP to

Type I APP) bond and extended warranties.

Flintlastic STA Plus

T

APP/POLY 4.5 mm 98 lbs. 100 sq ft D6222, See “Flintlastic STA” plus premium

(177 mils)

Grade S, product allows for extended warranties.

Type I

Flintlastic Base 20 T

MF/T

SBS/FG 3.0 mm (118 mils)

80 lbs.

100 sq ft D4601, Offers the strength of fiberglass Type II, D6163, reinforcement and the pliability of Grade S, SBS-modified asphalt. Type I

Flintlastic Ultra Poly SMS

MF/CA SBS/POLY 3.7 mm

HA/T

(146 mils)

89 lbs.

100 sq ft

D6164 Grade S,
Type I

For details on additional base sheets utilized in torch systems, please refer to page 19.

CertainTeed’s most robust base ply; combines high performance, extra-tough, stress-resistant polyester mat with pliable SBS-modified asphalt; pairs well with any cap sheet and offers extended warranties.

1 In addition to product values listed above, base sheet selection will be influenced by CertainTeed system approvals for fire performance and/or wind uplift resistance.

20

Cap Sheets Torch

Product Application Material Thickness Weight Coverage ASTM Why Buy?1

Flintlastic

T

APP/POLY 4.0 mm 103 lbs. 100 sq ft D6222, Workhorse granule-surfaced, torch- grade,

GTA

(157 mils)

Grade G, APP-modified cap sheet; combines strength and

Type I Uv stability of APP-modified asphalt with the

stress-resistance of its polyester reinforcement mat.

Flintlastic

T

APP/POLY 4.0 mm 93 lbs. 100 sq ft D6222, See “Flintlastic GTA” plus highly reflective,

GTA

(157 mils)

Grade G, granules. Reduce thermal heat gain, improving

CoolStar®

Type I building comfort and reducing energy cost.

Flintlastic® T GTA­FR

Flintlastic

T

GTA­FR

CoolStar®

Flintlastic

T

STA

Flintlastic

T

STA Plus

Flintlastic

T

GTS­FR

Flintlastic

T

GTS­FR

CoolStar

APP/POLY 4.0 mm (157 mils)

103 lbs.

100 sq ft D6222, See “Flintlastic GTA”; fire retardant additives Grade G, enables incorporation in Class A2 fire rated system. Type I

APP/POLY 4.0 mm (157 mils)

98 lbs.

100 sq ft D6222, See “Flintlastic GTA-FR” plus highly reflective. Grade G, Reduces thermal heat gain, improving building Type I comfort and reducing energy cost.

APP/POLY 3.8 mm (150 mils)

86 lbs.

100 sq ft

D6222, Grade S,
Type I

Smooth surfaced, torch grade, APP-modified cap sheet (or base/ply); combines strength and Uv stability of APP-modified asphalt with the stress-resilience of its polyester reinforced mat; installs quickly with a granule-free, forgiving selvage edge.

APP/POLY 4.5 mm (177 mils)

98 lbs.

100 sq ft D6222, See “Flintlastic STA” plus premium product allows Grade S, for extended warranties. Type I

SBS/POLY 4.0 mm (157 mils)

103 lbs.

100 sq ft

D6164, Grade G, Type II

Granule surfaced, torch-grade SBS-modified cap sheet; CertainTeed’s most robust (Type II) torch-grade cap sheet with a high-performance, extra-tough, stress-resistant (excellent elongation) polyester mat. Fire retardant additives enables incorporation in Class A2 fire-rated system.

SBS/POLY 4.0 mm 103.5 lbs. 100 sq ft D6164, See “Flintlastic GTS-FR” plus highly reflective.

(157 mils)

Grade G, Reduces thermal heat gain, improving building

Type II comfort and reducing energy cost.

1 In addition to product values listed above, cap sheet selection will be influenced by CertainTeed system approvals for fire performance and/or wind uplift resistance. 2 Please visit www.ul.com/database and review CertainTeed’s Roof Systems TGFU.R11656 for deck type and slope requirements.

21

ASPHALTIC MEMBRANES ­ HOT ASPHALT/COLD ADHESIvE APPLIED
Recommended Systems Hot/Cold
Why Hot/Cold? Because it’s tried and true.

System Name 12 Years

SYSTEM ANATOMY

Insulation

Base

Ply

Optional All Weather Empire Base Sheet (MF) —

Cap Flintlastic GMS

15 Years 20 Years 20 Years 20 Years 25 Years 25 Years

Optional

Black Diamond®

—

Base Sheet (SA)2

Flintlastic GMS

Optional
Optional
Double layer, second layer
adhered
Double layer, second layer
adhered
Double layer, second layer
adhered

Black Diamond

—

Base Sheet (SA)2

Glasbase Base Sheet (MF) Flintglas Ply 4 (2 layers, HA)

Flintlastic Base 20

—

(HA/CA)

Flintlastic

—

Ultra Glass SA (SA)

Flintlastic

—

Ultra Poly SMS

(HA/CA/T)

Flintlastic Premium FR-P CoolStar1
Flintlastic GMS
Flintlastic FR-P
Flintlastic Premium FR-P (CoolStar1)
Flintlastic Premium FR-P (CoolStar1)

1 CoolStar surfacing must be selected for highest solar reflectivity. 2 When self-adhering a base layer over wood decks, priming is recommended. Self- adhering over wood decks is not permitted by code in Miami-Dade County;
check your local building code. At the end of the roofing membrane’s life, roofing membranes self-adhered over wood decks will require replacement of the deck. Self-adhering to resinous wood, such as pine, is prohibited. Roof systems with base sheets self-adhered directly to wood roof decks quality for Integrity Roof System Limited Warranties only; Integrity Roof System NDL Limited Warranties and Sure StartTM Plus 5-Star Warranties require the use of Flintlastic SA NailBase as a base sheet.

22

Face it – some old dogs don’t need new tricks, and CertainTeed hot asphalt and cold adhesive low-slope roof systems have consistently delivered on the promise of protection for generations. These systems offer multiple watertight layers with unparalleled bond strength. So when the risk of a roof leak means more than just a maintenance nuisance, trust what works and spend the time to install peace-of-mind.

SYSTEM VALUE

Leak protection4 FPreerfeozre/mTahnacew sSttraoblneg, dimensionally Pwlieaatblheeirn cold Fire resistant3 rQeudiucckeindsltaalbloartion/ aRnesdiliUeVntratyoshigh heat Easy to repair Solar reflectivity1

Good Performance

Better Performance

details

Best Performance

Economical, stable, resilient. With its ASTM D6757 rating, All Weather is an inexpensive way to get a roof “in the dry” and its lightly SBS-modified asphalt allows for a more uniform application than a non-modified base. Increase warranty to 15 years when base is hot applied.

Black Diamond® is lightweight and fast to apply, and can serve as a temporary roof for up to six months. Increase warranty to 20 years by adding two layers of FlintBoard® insulation.

Self-adhered base offers increased application speed; polyester-reinforced ASTM D6164 Type II cap membrane delivers excellent durability and resilience.

This three-ply system combines highly economical, non-modified base and ply layers with CertainTeed’s workhorse hot/cold cap sheet.

This classic system offers the strength and stability of fiberglass reinforcement with the pliability and stress resilience of polyester asphalt. 20-year warranty requires the use of FlintBond® for cold adhesive applications.

This system offers excellent two-ply asset protection and reduced labor by combining our highest performing, self-adhering base ply with our most resilient, ASTM D6164 Type II cap sheet.

This system offers the best two-ply asset protection with CertainTeed’s most robus (60 pounds of modified asphalt per square) and versatile (can be mechanically fastened, hot applied, cold applied or torched) base sheet and our most resilient, ASTM D6164 Type II cap sheet.

3 Please visit iq.ulprospector.com and review CertainTeed’s Roof Systems TGFU.R11656 for deck type and slope requirements. 4 Performance assumes proper roof maintenance. See warranty for details.

23

ASPHALTIC MEMBRANES ­ HOT ASPHALT/COLD ADHESIvE APPLIED

Base/Ply Sheets Hot/Cold

Product Application Material Thickness

GlasbaseTM MF/HA/CA BUR/FG 1.0 mm

Base Sheet

(39 mils)

Weight Coverage ASTM

75 lbs.

300 sq ft

D4601, Type II, UL G2

Why Buy?1
Economical, non-modified, permeable base sheet.

All

MF/HA/CA

Weather/

Empire®

Base Sheet

BUR­ SBS/FG

1.3 mm (51 mils)

70 lbs.

200 sq ft

D4601, Type II, D6757

Economical, lightly SBS-modified non-permeable base sheet to allow for more uniform application than non-modified sheets; most economical “dry-in” option.

Flintlastic® MF/HA/CA SBS/POLY 2.0 mm

Poly SMS

(79 mils)

89 lbs.

200 sq ft

D4601, Type II

Most economical polyester-reinforced base sheet; both SBS-modified asphalt and polyester reinforcement mats are valued for pliability and stress resilience.

Flintlastic MF/HA/CA SBS/FG 2.3 mm

Base 20

(91 mils)

88 lbs.

150 sq ft

D6163, Grade S, Type I, D4601, Type II

Offers the strength of fiberglass reinforcement with the pliability of SBS- modified asphalt.

Flintlastic Ultra Poly SMS

MF/HA SBS/POLY 3.7 mm

CA/T

(146 mils)

89 lbs.

100 sq ft D6164, Type I

CertainTeed’s most robust base ply; combines high performance, extra-tough, stress-resistant polyester mat with pliable SBS-modified asphalt; pairs well with any cap sheet and offers extended warranties.

Flintglas®

HA

BUR/FG 0.6 mm 36 lbs. 500 sq ft D2174, Economical, non-modified, permeable

Ply 4

(24 mils)

Type Iv, ply sheet.

UL G1

1 In addition to product values listed above, base sheet selection will be influenced by CertainTeed system approvals for fire performance and/or wind uplift resistance.

Cap Sheets Hot/Cold

Product Application Material Thickness

Flintlastic® GMS

HA/CA SBS/POLY 3.7 mm (146 mils)

Weight Coverage ASTM Why Buy?1

93 lbs.

100 sq ft

D6164, Grade G,
Type I

Workhorse granule surfaced, mop-grade, SBS-modified cap sheet; combination of stress-resistant polyester reinforcement mat and pliable SBS-modified asphalt delivers high resistance to strain caused by building movement

Flintlastic FR­P

HA/CA

SBS/POLY 4.2 mm (165 mils)

100 lbs. 100 sq ft

D6164, Grade G,
Type I

See “Flintlastic GMS” with additional SBS-modified asphalt and fire retardant additives enables incorporation in Class A2 fire-rated system.

Flintlastic Premium FR­P

HA/CA

SBS/POLY 4.2 mm (165 mils)

100 lbs.

100 sq ft

D6164, Grade G, Type II

See “Flintlastic FR-P” with high performance, extra-tough, stressresistant polyester mat to allow for “type II” ASTM performance classification.

Flintlastic Premium FR­P CoolStar

HA/CA

SBS/POLY

4.2 mm (165 mils)

99.5 lbs. 100 sq ft

D6164, Grade G, Type II

See “Flintlastic Premium FR-P” plus highly reflective. Reduces thermal heat gain, improving building comfort and reducing energy cost.

Flintglas®

HA/CA

MS Cap Sheet

BUR/FG

3.0 mm (118 mils)

77 lbs.

100 sq ft

D3909, D4897 UL G3

Economic cap solution for built-up roofing systems, reduces labor when compared to flood coat and gravel.

Flintglas MS Cap Sheet CoolStar

HA/CA

BUR/FG

3.0 mm (118 mils)

74 lbs. 100 sq ft

D3909 D4897

See “Flintlastic MS Cap Sheet” plus highly reflective. Reduces thermal heat gain, improving building comfort and reducing energy cost.

1 In addition to product values listed above, cap sheet selection will be influenced by CertainTeed system approvals for fire performance and/or wind uplift resistance. 2 Please visit iq.ulprospector.com and review CertainTeed’s Roof Systems TGFU.R11656 for deck type and slope requirements.

24

25

COLORS

Granulated Cap Colors

GTA

WHITE

S

TORCH GTA-FR
S

GTS-FR
S

S = Indicates stocked, at minimum, in Little Rock, Arkansas manufacturing plant; check CertainTeed Plant Catalogs for additional stocking locations; any product stocked in Little Rock is available nationwide
M2 = Made to order

SELF-AdHEREd

SA Cap

SA Cap FR

S

S

MS Cap
S

HOT/COLd

GMS

FR-P

S

S

Premium FR-P
M2

COOLSTAR®

S

S

M2

M2

M2

S1

M2

BURNT SIENNA

S

S

MOIRÉ BLACK

S

S1

S

S

S1

S

TERRA COTTA

M2

S

RESAWN SHAKE

S

S

S

WEATHERED WOOD

S

S

S

M2

BUFF

S

EVERGREEN

S

COLONIAL SLATE

S

S

HEATHER BLEND

S

S

MOJAVE TAN

S

All granule colors available in 5G, 50 lb. pails for aesthetic surfacing over asphalt bleed out or liquid-applied flashing.

1 Only stocked in California 2 Minimum order is 150 rolls (6 pallets) for products that are 25 rolls/pallet and 160 rolls (8 pallets) for products that are 20 rolls/pallet
Colors shown in samples and marketing literature may be slightly different than the installed product. Granule blends may vary slightly from one production run to the next but are often undistinguishable upon installation.

26

27

REPAIR ­ GOOD TO BEST

FlintBond®
Flashing Adhesive and Repair

· All weather, highly resilient SBS-modified mastic will adhere SBS-modified or repair modified asphalt membranes in any climate (will bond underwater)
· High-heat resistant, will not slip, sag or mudcrack
· Repairs asphaltic membranes, concrete and control joints

Color Black
Black

Packaging
10.1 oz. (12/carton)
3G 5G

Units/Pallet
576 (48 cartons)
64 48

Yield/Unit
24 linear ft. (1/4″ bead)
36-39 sq. ft. 60-65 sq. ft.

365 RepairMasterTM
Silicone Repair Mastic

· Highly elastic silicone mastic engineered to seal deficiencies in most roof surfaces
· Apply in dry or wet conditions (will bond under water)
· Repairs asphaltic or single-ply membranes, asphaltic shingles, metal roofs and previously coated roofs

Color
White Gray Black

Packaging 2G

Units/Pallet 88

Yield/Unit
24-26 sq. ft. (1’8″ thick)

SmartFlash® ONE
Liquid-Applied Flashing and Repair

· One-part asphaltic urethane resin · 10-year leak-proof warranty on repairs. · Repairs asphaltic membranes and asphaltic
shingles2

Color Packaging

Units/Pallet

Yield/Unit1

Brown

Flash Pack 1G (2/carton) 5G

36

17 sq. ft.

120 (60 cartons) 17 sq. ft.

36

83 sq. ft.

1 Assumes 3-course flashing with a finish coat. 2 Please see Technical Data Sheet for comprehensive list of approved substrates.

28

29

LIQUID-APPLIED FLASHING & REPAIR
SmartFlash® ONE
If you work with asphaltic membranes or shingles, SmartFlash ONE should be in your yard.
SmartFlash ONE is a one-part, self-terminating, Uv stable polyurethane bituminous resin for new flashings or repairs. Engineered for an excellent bond to bituminous membranes, concrete, wood, sanded/abraded rigid PvC pipe and metal1.

Why Use for Flashing Details? Maintenance-free waterproofing, up to 20 years.
· Self-Terminating: No lead, no additional components · Versatile: Conformation to almost any penetration shape · Efficient: One-part resin, no primer, no roof-top measuring or mixing, no limitation to working time,
no waste ­ unused resin can be stored and used on a future project · Warranted: CertainTeed Integrity RoofTM System (NDL) Limited Warranties apply to SmartFlash® ONE
roof system flashings, up to 20 years

SmartFlash Repairs can be a highly profitable business, but if you’re not charging for the tools and accessories you’re using, you are leaving money on the table. The SmartFlash ONE Flash pack includes everything you need to flash or repair 17 square feet: 1G resin, 6″ x 36′ polyester, 4″ roller, two extra naps, 2″ brush, scissors, two pairs of latex gloves, 2″ x 180″ masking tape, and can be invoiced as a single line item. All this with the added benefit of always having what you need to finish the job.

Product

Color

SmartFlash ONE Flash Pack

Brown

SmartFlash ONE 1G

Brown

SmartFlash ONE 5G

Brown

SMARTFAB Polyester Reinforcement White

Packaging

Units/Pallet Yield/Unit (sq ft)

5G (1G resin)1

36

172

1G, sold 2/carton

120

172 (32 per carton)

5G

36

832

4″, 6″, 12″, 20″ rolls sold 5/carton See SMARTCOAT Products for details by width

1 See Technical Data Sheet for precautions when adhering to metal. 2 Assumes 3-course flashing with a finish coat.
Highly flammable liquid and vapor. Keep away from heat/sparks/open flames/hot surfaces. Store away from flame or heat. Store in temperature range of 32-95°F (0 to 35°C).

35 30

Why Use for Repairs? UV-stable, quick, permanent repairs.

Joe Knows Commercial Roofing
You should too! Watch for how to Flash a Drain with SF1

· Versatile: Repair cracks in asphalt membrane/shingle or damaged/corroded flashings

· Visually Appealing: Broadcast granules into wet resin to match existing roof surfacing only if desired

· Efficient: Easily resealed and stored on repair trucks for use when needed

· Warranted: Backed by 10-year waterproof repair warranty

36 31

EDGE METAL AND ACCESSORIES

FlintEdge®
COPING PRODUCTS
FlintEdGE® Coping Tapered, Flat, and Existing Slope Features a snap-on cover and 20 ga. galvanized steel anchor clips and is available in variety of options for different wall conditions and colors choices.
FlintEdge Coping OE Tapered, Flat, and Existing Slope Quick-to-ship convenience and economical pricing to simplify projects and maximize profits. Manufactured in 12′ lengths with fasteners provided for quicker installation an lower costs.
FlintEdGE Coping CL Single and Dual Cantilever For attachment to a parapet wall with a non-structural exterior building façade. The products unique support brackets bring extra stability to the roof edge system when attachment is required up to 6″ away from the outside facade.
FlintEdGE Coping GL Tapered, Flat, and Existing Slope Versions For parapet conditions with high-performance requirements. It features a snap-on cover and 16-gauge, galvanized steel anchor clips with factory-applied stainless-steel spring.
32

FASCIA PRODUCTS
FlintEdGE Fascia OE MB Built-up or Modified Version Quick-to-ship convenience and economical pricing to simplify projects and maximize profits.
FlintEdGE Fascia XE MB Built-up or Modified Version Designed for BUR or Modified roofs to protect against high wind events where larger face heights are needed.
FlintEdGE Fascia XT MB Built-up or Modified Version Features an extruded aluminum anchor bar design that securely terminates the membrane. Available in multiple heights to accommodate multiple nailers and coverage requirements.
Edge Metal products are available in 31 different colors and finishes. For complete color options, please see the Edge Metal brochure or www.certainteed.com. Our most popular colors are:

FlintEdGE Fascia ET MB Built-Up or Modified Version
Designed for fast and easy installation, eliminating the stripping in that is typical of other roof edge designs.
FlintEdGE Fascia Fd Built-up or Modified Version
Designed to concealed splice plate design prevents migration under the cover panels and provides proper spacing for thermal movement of the material.
FlintEdGE Fascia GG MB Snap-on, Built-up or Modified Version
Features dual attachment points on both the face and roof deck allow for added flexibility when accommodating roof irregularities with no exposed fasteners and no unsightly cover plates.
Colors shown are representative of the prefinished KYNAR® colors but not exact matches. Actual metal color chips are available upon request and should
be used for final color approval.

Ascot White

Bone White

Dove Gray

Medium Bronze

Sandstone

Shale Gray

Statuary Bronze

ADDITIONAL PRODUCTS
FlintEdGE Expansion Joints Roof to Roof and Roof to Wall Versions
Ideal for allowing thermal movement and condensation control between two roof systems or a roof system and a terminating. Also, the continuous cleat protects from wind driven rain.
FlintEdGE Gutter Box, Chamfer, and Offset Versions. Additional products: Downspouts, Scuppers, and Conductor Heads.
Unique design, superior roof drainage, and attractive appearance, the design incorporates a 1″ wide extruded internal gutter hanger for strength and support.
FlintEdGE Reglets Multiple Versions
Provides a watertight termination at the leading edge of the roofing material.
More than 50% of low-slope roof systems blow offs are associated with roof perimeter failure. Protect your building and it’s occupants by specifying a high quality, ANSI/SPRI compliant edge metal. · ANSI/SPRI/FM 4435/ES-1 Tested · Factory Mutual Approved · Miami-Dade approved · Available in a variety of colors, sizes, and materials · Easy installation resulting in decreased labor costs
Reach out to your local CertainTeed Territory Manager to request a sample and demonstration of FlintEDGE metal roof accessories.
33

FASTENERS AND ACCESSORIES

FlintFast® Fasteners

Engineered to improve application efficiency and increase the strength of the mechanical attachment, FlintFast fasteners provide top quality performance in commercial roofing systems. FlintFast fasteners are tested to meet FM requirements for the attachment of roofing insulation (FlintBoard®) and base sheets in high performance roof systems.

FlintFast #12 Application(s): Metal (16 gauge or thinner) Use with metal plate Threads per inch/style: 13 single lead Head style: #3 Phillips Material/Finish: Carbon steel Metro Dade Co. Approved: Yes FM Approved: Yes Standard lengths: 1-5/8″, 2-1/4″, 3″, 4″, 5″, 6″, 7″, 8″
FlintFast #14 Application(s): Metal or wood Use with metal plate Threads per inch/style: 13 single lead Head style: #3 Phillips Material/Finish: Carbon steel Metro Dade Co. Approved: Yes FM Approved: Yes Standard lengths: 1-1/4″, 2″ 3″, 4″, 5″, 6″, 7″, 8″, 9″, 10″, 11″, 12″
FlintFast #15 Application(s): Metal or wood Use with metal plate Threads per inch/style: 13 single lead buttress Head style: #3 Phillips Material/Finish: Carbon steel Metro Dade Co. Approved: Yes FM Approved: Yes Standard lengths: 2″, 3″, 4″, 5″, 6″, 7″, 8″, 9″, 10″, 12″, 14″, 16″, 18″
34

FlintFast Nylon/FG Auger Application(s): Lightweight roof deck lightweight concrete, Tectum, and gypsum Use with barbed insulation and membrane plate Head style: 1/4″ square drive Material/Finish: Nylon reinforced fiberglass Metro Dade Co. Approved: Yes FM Approved: Yes Standard lengths: 2″, 2-1/2″, 3″, 3-1/2″, 4″, 4-1/5″, 5″, 5-1/2″, 6″, 6-1/2″, 7″, 7-1/2″, 8″, 8-1/2″, 9″, 9-1/2″, 10″, 11″, 12″
FlintFast #14 Insulated Panel Fastener Application(s): Structural insulated panels and nail base panels Use with metal plate (optional) Threads per inch/style: 10 single lead Head style: Pancake head T-30 star drive Material/Finish: Carbon steel FM Approved: Yes Standard lengths: 2-5/8″, 3″, 3-1/2″, 4″, 4-1/2″, 5″, 5-1/2″, 6″, 6-1/2″, 7″, 7-1/2″, 8″, 8-1/2″, 9″, 9-1/2″, 10″

GalvalumeTM Membrane and Insulation Plates

FlintFast plates are used in conjunction with FlintFast fasteners to secure virtually all types of insulation boards and select modified bitumen base sheets for roofing systems. Galvalume is a trademark of BIEC International, Inc.

FlintFast Round Barbed Stress Plate Use with all steel deck fasteners Dimensions: 2″ & 2-3/8″ round Material: Galvalume steel Metro Dade Co. Approved: Yes FM Approved: Yes

FlintFast Hex Insulated Stress Plate Use with all steel deck fasteners Dimensions: 2-7/8″ hex Material: Galvalume steel Metro Dade Co. Approved: Yes FM Approved: Yes

FlintFast Round Stress Plate Use with all steel deck fasteners Dimensions: 3″ round Material: Galvalume steel or Plastic Metro Dade Co. Approved: Yes FM Approved: Yes
Termination Bars Fasteners

Barbed Insulation & Membrane Plate Use with nylon/FG auger Dimensions: 3″ round Material: Galvalume steel Metro Dade Co. Approved: Yes
Galvalume is a trademark of BIEC International, Inc.

FlintFast termination bars are made from specially extruded aluminum without sharp edges. Termination bars come with holes either 6″, 8″ or 12″ on center.

FlintFast Term Bar Rib Flat Feature: Rib Flat Thickness: .10″ Material: Extruded aluminum

FlintFast Term Bar .075 Feature: Single Lip or Rib Single Lip Thickness: .075″ Material: Extruded aluminum

FlintFast Term Bar All Purpose Feature: All Purpose Thickness: .050″ Material: Extruded aluminum

FlintFast Term Bar .090 Feature: Lip & Ball Thickness: .090″ Material: Extruded aluminum
35

LIQUID-APPLIED ROOF RESTORATION & COATING

SMARTCOATTM At a Glance
Why tear off when you can restore?
Roof tear off is expensive, laborious and adds tremendous amounts of waste into landfills. In some cases, additional, significant expense is required to bring the new roof system into code compliance. Roof restoration can extend the life of the existing roof for decades. CertainTeed offers a comprehensive line of silicone or acrylic-based restoration systems consisting of roof wash, surface prep products (substrate dependent, only used as needed), mastics/sealants to ensure the roof is watertight (mastics are applied with and without reinforcement depending on the condition of the existing roof detail), and, finally, a coating is applied to form a seamless, monolithic, protective membrane.
Can every roof be restored?
Unfortunately, no. Roofs should be inspected to determine if they are good candidates for restoration. The primary determining factor is the presence and amount of entrenched water in the current system and its root cause. A good rule of thumb is if less than 20% of the roof requires repairs to be made sound, clean and dry, restoration is possible.
500 Series Stitchbond Polyester Reinforce seams, details and acrylic roof systems.

clean
100 Roof Wash
Nothing sticks to dirt. Help your customers avoid call backs by starting with a clean slate.
prep
200 Series Primer/Bleed Blocker

200 Bleed Blocker prevents staining on asphaltic roof restorations;

210 Universal Primer is engineered to optimize adhesion across a variety of

substrates when needed.
seal
300 Series Mastic/Sealant
If your mastics don’t have the muscle to permanently seal leaks, your
restoration project will miss the mark.
coat

400 Series Coatings

SMARTCOAT coatings are high-solids,

direct-bond optimized formulations.

600 Traffic Coat Series

And, yes, you can recoat our silicone.

See it in action!

Protects your roof under light

or heavy foot traffic.

36

37

LIQUID-APPLIED ROOF RESTORATION & COATING

SMARTCOATTM Products

Product
100 Roof Wash Sold 4/Carton 200 Bleed Blocker 210 Universal Primer 220 Asphalt Emulsion
300 Non-Fibered Acrylic Mastic 301 Fibered Acrylic Mastic 350 Silicone Mastic 365 Repair Master 370 UltraSeal
400 High Performance Acrylic Coating Meets ASTM D6083, Type I 401 High Solids Acrylic Coating
420 Filtered Aluminum Coating 421 Non Filtered Aluminum Coating 450 High Solids Silicone Coating
SMARTFAB 500 Polyester SMARTFAB 501 Polyester Reinforcement All sold 5/carton
600 Acrylic Traffic Coat FlintRock Roofing Granule Yellow

Color

Packaging

CLEAN/PREP

Blue

1G (4/carton)

Light Grey

5G

Dark Grey

5G

Brown

5G 55G 275G

SEAL

White

3.5G

White

3.5G

White

2G

White

2G

Grey

10.1 oz. (24/carton)

COAT

White, Tan

5G 55G 275G

White, Tan

5G 55G 275G

Silver

5G

Silver

5G

Light Gray Dark Gray Santa Fe Tan White, Black

5G 55G

REINFORCE

White

4″

White

40″

6″

12″

20″

PROTECT

Yellow, Tan, Grey 5G

Yellow

5G

Units/Pallet
144 (361) 48 48 48 4 1
48 48 88 88 1,080 (45)
48 4 1 48 4 1 48 48 48 4
180 (36) 25 180 (36) 120 (24) 90 (18)
48 48

Coverage (sq ft)2
4,000­12,000 333­500 333­500 125 1,375 6,875
42-46 42-46 24-46 24-46 25 LF/tube
63-167 688-1,833 3,438-9,167 63-167 688-1,833 3,438-9,167 333-500 333-500 200-333 2,200-3,667
100 1,080 150 300 500
250 500

1 Carton Quantity 2 Coverage assumes range of approved specified application rates, some warranty duration dependent.

38

SMARTCOATTM Silicone versus Acrylic

Silicone coatings are primarily valued for their high solids chemistry.

A coating with 95% solids will remain relatively the same

thickness from application to cure whereas a coating

with only 55% solids, will be

approximately half as thick once

cured. This correlates to higher

Chemistry

warranty durations with less material or labor with silicone.

Ponding Water Application Temperature

Acrylic coatings are less expensive per gallon- for 10-year warranty durations acrylic restoration may be more cost effective.

Cure Method Rain Resistance/Seasonality Material Cost (per gallon) Application

Popular Restoration Systems & Warranties
Once the existing roof is properly prepared and watertight, coatings are applied in varying gallons per square, depending on the desired warranty duration.

Solids by volume Labor (20-year warranty) Reinforced (field) Slippery Surface Reflectivity Dirty Surface (over time)

SILICONE Inorganic
Stable 40°F Moisture High/Long More Roller or Spray Rig 95% ±2 Less Generally, No Yes High More

ACRYLIC Organic Unstable
50°F Evaporation Low/Shorter
Less Roller or Spray Rig
50-55% More
Not Always but Common Yes, less High Less

Warranty duration 10 15 20 20

Existing Roof Membrane1 Membrane1 Metal Membrane1

Prep Layer #200 recommended2 #200 required2 #210 (only if needed) #200 required2

Coating #400/401/405 Acrylic #450 Silicone #400 Acrylic #450 Silicone

Layer 1 1.5G 2G 2G 2.5G

Layer 2 1.5G — 1.5G —

Layer 3 — — 1.5G —

1 Membrane includes asphaltic or single-ply 2 #200 would only be used on existing asphaltic roofs

39

PRODUCTS & SYSTEM WARRANTIES

CertainTeed offers system dependent, asphaltic membrane limited warranty durations between ten and twenty-five years. Additionally, Credentialed Contractors can increase warranty durations 25% by engaging in an Integrity Maintenance Agreement with their client.

Asphaltic Membrane Limited Warranties

Limited Warranty on Materials

Integrity Roof SystemTM Limited Warranty

Contractor None Requirements

None

Coverage

Warranty covers leaks caused by manufacturer defects in CertainTeed cap sheets only

Warranty covers leaks caused by manufacturer defects in CertainTeed products only

Obtain

https://www.ctndl.com/sf/warranty.asp

Integrity Roof System NdL Limited Warranty
Silver or Gold Star Modified Bitumen Credential
Warranty covers leaks caused by manufacturer defects in CertainTeed products and/or approved partner-brands and/or workmanship
Application submitted through www.ctndl.com

Asphaltic and Accessory Stand-alone Warranties

Enhanced Wind Warranty Endorsement FlintBoard® Limited Warranty SmartFlash® ONE Limited Warranty

Contractor Silver or Gold Star

—

—

Requirements Modified Bitumen Credential

Coverage

Warranty covers roof system detachment Warranty covers thermal

Warranty covers leaks caused by

in accordance to primary CertainTeed

insulation R-value in FlintBoard manufacturer defects in CertainTeed

Warranty

products

products only

Obtain

Application submitted through Technical Services

https://www.ctndl.com/sf/warranty.asp

SMARTCOAT Limited Warranty on Materials

Contractor None Requirements

Coverage

Warranty covers manufacturing defects in SMARTCOAT products only

Obtain

https://www.ctndl. com/sf/warranty.asp

SMARTCOATTM Limited Warranties

CertainTeed Integrity Roof System Limited Warranty, SMARTCOAT Extension

SMARTCOAT No dollar Limited (NdL) Limited Warranty

CertainTeed Integrity Roof System NdL Limited Warranty, SMARTCOAT Extension

Gold Star Liquid-Applied Contractor

Warranty covers leaks caused by manufacturing defects in a preexisting CertainTeed low-slope roof and SMARTCOAT products

Warranty covers leaks caused by manufacturing defects in SMARTCOAT products and/or workmanship

Warranty covers leaks caused by manufacturing defects in a preexisting CertainTeed low-slope roof and SMARTCOAT products and/or workmanship

Application submitted through Technical Services

40

Warranty Fees
There are no fees associated with a Limited Warranty on Materials, an Integrity Roof SystemTM Limited Warranty, a SMARTCOATTM Limited Warranty on Materials, a CertainTeed Integrity Roof SystemTM Limited Warranty, SMARTCOAT Extension, a FlintBoard® Limited Warranty, or a SmartFlash® ONE Limited Warranty.
Integrity Roof System NDL Limited Warranties & SMARTCOAT NDL Limited Warranties
Subject to CertainTeed published requirements, NDL Warranties are available to CertainTeed-approved contractors based on the following fee schedule:

Scan for access to warranty application/registration links, warranty samples and Commercial Roof Maintenance Program details

Built-Up Roofing (Non-Modified) Modified Bitumen Roofing Specifications Specifications

Warranty Duration

Warranty Fee

Warranty Duration

Warranty Fee

Warranty Duration

10 Years

$6.00 per square 10 & 12 Years $4.00 per square 10 Years

($600 minimum)

($400 minimum)

15 Years

$10.00 per square 15 Years ($1,000 minimum)

$7.50 per square ($750 minimum)

15 Years

20 Years

$15.00 per square 20 Years ($1,500 minimum)

$12.50 per square 20 Years ($1,250 minimum)

N/A

N/A

25 years*

$15.00 per square N/A ($1,500 minimum)

• Subject to additional requirements. Contact Tech Services 1-800-396-8134 x2. NDL Warranties are fully transferrable subject to $500 fee and inspection, subject to change at any time.

SMARTCOAT Specifications

Warranty Fee Acrylic

Silicone

$7.00 per square $10.00 per square ($1,000 minimum) ($1,000 minimum)

$9.00 per square $12.00 per square ($1,500 minimum) ($1,500 minimum)

$11.00 per square $15.00 per square ($2,000 minimum) ($2,000 minimum)

N/A

N/A

Enhanced Wind Warranty Fee Schedule

55 ­ 80 mph 81 ­ 90 mph 91 ­ 100 mph

$1.00 per square $2.00 per square $4.00 per square

Wind endorsement fee schedule for NDL, minimum 100 sq. Contact Tech Services 1-800-396-8134 x2.

101 ­ 110 mph

$8.00 per square

111 ­ 120 mph

$10.00 per square

121 ­ 135 mph

$15.00 per square

If Professional Engineering Stamp is required, additional $1,000 fee.

NOTE: All roofs require regular inspections and periodic maintenance to achieve their expected life. Roofs should be expected at least twice yearly, in the spring and fall. Additionally, all roofs should be inspected after any severe weather or storms. Failure to properly maintain the roof system voids all CertainTeed Commercial Roofing Limited Warranties.

References

• Home | CertainTeed
• gobain.com
• Login
• Home | CertainTeed
• Welcome! | NDL | CertainTeed MyEdge
• Product Sourcing and Certifications Database | UL Solutions
• CertainTeed Limited Warranties

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>