Moooni L-08B Gold Dining Room Chandelier Modern Instruction Manual

Moooni L-08B Gold Dining Room Chandelier Modern

Product Information

Specifications:

• Product: Chandelier Light
• Model No.: L-08B
• Bulb Type: E12 x 8 (Max 40W each, LED recommended)
• Number of Glass Shades: 52

Product Usage Instructions

Safety Rules:
Before starting the installation, ensure the electricity to the wires you are working on is shut off. Use caution and follow all safety guidelines provided in the manual.

Installation & Operation Instructions:

1. Tools You Need:
   • Ladder
   • Pliers
   • Wire Strippers
   • Screwdrivers
   • Power Drill (optional)
   • Drill Bit (optional)
2. Packing List:
   • Outlet Box (not included)
   • Mounting Bracket x 1
   • Mounting Screw (from outlet box)

Troubleshooting:

Clean And Care:
To clean, wipe the fixture with a soft cloth. Avoid using chemical cleaners, scouring pads, steel wool, or abrasive paper.

Ordering Parts:
Keep the manual for future reference. Order replacement parts from the place of purchase using the exact wording from the diagrams.

FAQ:

Q: How many bulbs does the chandelier light require?
A: The chandelier light requires E12 x 8 bulbs, with a maximum of 40W each. LED bulbs are recommended.

Please contact us with the following information:

1. Screenshot of your order page, including product picture, name and order ID number.
2. Problem details with pictures/short video if possible.
   • Email: lightingcustomercare@gmail.com.

Safety Rules

WARNING:
BE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS SHUT OFF; EITHER THE FUSE IS REMOVED OR THE CIRCUIT BREAKER IS TURNED OFF. TURNING THE POWER OFF USING THE LIGHT SWITCH IS NOT SUFFICIENT TO PREVENT ELECTRICAL SHOCK.

NOTE:
The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions or situations that may occur. It must be understood that common sense, caution, and care, are factors that cannot be built into any product. These factors must be supplied by the person(s) installing this unit.

READ & SAVE THESE INSTRUCTIONS

CAUTION:
Before assembling the lighting fixture, refer to the section titled Wiring Connections. If you feel you do not have enough electrical wiring experience, either refer to a do-it-yourself wiring handbook or have your lighting fixture installed by a qualified, licensed electrician.

INSTALLATION & OPERATION INSTRUCTIONS GENERAL

• Before starting the installation, disconnect the power by turning off the circuit breaker or by removing the appropriate fuse at the fuse box.
• Turning the power off using the light switch is not sufficient to prevent electrical shock.
• All electrical connections must be by local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.

Tools You Need

Packing List

Note: Glass is fragile and spare parts are included.

Mounting and Wiring

1. Mount the Bracket
   Take off screws from outlet box (A). Secure the mounting plate (B) onto the box with screws (C) taken off (Fig 1). Fix two additional screws as fig. 2.

2. Connect the Wires

   • Step 1: Measure and connect the downrods to the fixture body for a proper height. Pass the fixture wires through the downrod and canopy.
   • Step 2: Connect the fixture wires (E) to the wires from the outlet box, black to live wire, white to neutral wire, green/yellow and green wire to ground wire(F). Wrap the connectors (G) with electrical tape (H) separately.
   • Step 3: Spread apart the wires so that the live wires are on one side of the outlet box and the neutral wires are on the other side.

3. Fix the Canopy
   Fix the canopy (I) onto the bracket with cap nut (J) provided (Fig. 4).

Hook the Glass

1. Pass the main wires through the downrods, and connect the downrods onto the canopy and the fixture frame for a proper length according to your ceiling height.
2. Install Bulbs (E12 x 8, Max 40W each, LED recommended).
3. Attach the glass pieces onto the frame as picture above with screws, plastic washers, and hex nuts provided.

Troubleshooting

1. Missing/Broken Parts
   • Make a list of the missing/broken parts according to the packing list, take photos of broken parts, and then email us for free replacements.
2. Bulbs Do Not Light Up
   • Check your power and switch to make sure it’s powered on.
   • Check the bulb to make sure it’s installed correctly.
   • Change a new bulb.
   • Check the wires to make sure they are connected correctly.
3. Bulbs Flicker/Noisy Operation
   • Check the bulb to make sure it’s installed correctly.
   • Change a new bulb.
   • Make sure your bulb is dimmable if you use a dimmer switch.
4. Could Not Install/Assemble
   • Take photos of the ceiling/fixture, and contact the seller for technical support.

Clean And Care

To clean, wipe fixture with a soft cloth. Spraying from chemical cleaners can discolour the finish of fixture. Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture.

Ordering Parts

Keep this manual for future reference, and in case replacement parts are needed. Available parts can be ordered from the place of purchase. Use exact wording from diagrams when ordering parts.

“We followed the light to a brighter and warmer place.”

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>