Original Lenovo LP1 TWS Bluetooth 5.0 Headphones User Instructions

: June 4, 2024
: Lenovo

Table of Contents

Lenovo

Lenovo

Original Lenovo LP1 TWS Bluetooth 5.0 Headphones

Original-Lenovo-LP1-TWS-Bluetooth-5.0-Headphones

Specifications

BRAND: Lenovo
MODEL NUMBER: LP1-TWS
COLOR: White and grey
FORM FACTOR: In Ear
NOISE CONTROL: Active Noise Cancellation
HEADPHONE JACK: USB
CABLE FEATURE: Without Cable
WATER RESISTANCE LEVEL: Waterproof
ITEM WEIGHT: 70 Grams
COMPATIBILITY: All smartphones (Android + iOS) and PCs.
USB INTERFACE: USB Type-C.
EXECUTIVE STANDARD: Q / HDLCS 00332016.
BLUETOOTH VERSION: V5.0.
EFFECTIVE RANGE: ≥ 10m
SPEAKER DIAMETER: 10 mm.
IMPEDANCE: 16 Ω.
SPEAKER PERFORMANCE: 20 mW.
SIGNAL-TO-NOISE RATIO: ≥ 70 db.
DISTORTION: ≤ 5%.
FREQUENCY RESPONSE: 20 Hz – 20 kHz.
INPUT VOLTAGE OF THE CHARGER: 5 V / 500 mA.
PLAYING TIME: approx. 3 hours.
HEADPHONE BATTERY CAPACITY: 40 mAh.
CHARGING CASE CAPACITY: 300 mAh.
MANUFACTURER: Lenovo (Beijing) Co., Ltd. Made in China.

Introduction

Remove the charging case from the two earbuds. Within 5 seconds, the headphones are successfully linked and immediately turned on. Please take note: Press the MF button on both headphones for five seconds to switch them off if the R and L earphones are still having trouble pairing after some time. Once both headphones are turned on again, they will be automatically connected. For more details, check the user handbook. Power on/off, play/pause, volume up/down, forward/backward, answer/reject incoming calls, activate Siri/Google Assistant (English language not guaranteed)

These headphones have an IPX4 rating. The headphones produce superb sound and give Hi-Fi audio with “Super Bass.” Active Noise Cancelling Headphones (Noise Reduction) lessen background noise and provide the best atmosphere for on-the- go music listening.

HOW TO POWER ON

When you remove the earbuds from the charging case, they will automatically switch on. The earphones will emit the prompt sound “Power On.” Put your earbuds back in the charging case if they are not already there before picking them up again.

HOW TO INCREASE VOLUME

Look for and choose Control Panel.
Choose Sound.
Choose Device Properties from the menu.
Set the level by selecting the Levels tab.

HOW TO CHARGE

To start charging the Lenovo HT28 TWS headset, just open the charging box cover and place the device inside. When charging starts, the headset’s LED indicator flashes red; when charging is complete, it turns off.

HOW TO CHECK BATTERY

Either set your headphones on the wireless charging pad or use a USB-C connection cable to charge them. There is no accompanying accessory for the wireless charging board. The charging case’s built-in LED lets you know how the battery is doing. There are four sizes of earbud tips: L, M, S, and SS.

HOW TO MAINTAIN TWS

Better than a full charge is partial charging. If you can, try to keep the level at 80% or less. Charge nothing overnight.
Try not to overheat the battery.
While your headphones are charging, try not to use them.
When not in use, turn off your headphones.

Frequently Asked Questions

When is my Lenovo lp1 fully charged, and how do I know?

As the earphones charge, the LED indicator will glow red. The red light will go out when charging is finished.

How long does it take for Lenovo earbuds to charge?

USB Type-C, charging sensor port, 300 mAh case battery, 2H charging time, 12 hours of battery life. Bass increase, stereo surround HIFI sound quality, IPX4 waterproof, sweat-proof, etc.

How durable are TWS headphones?

True wireless headphones typically have a battery life of 3 hours or less before they run out of juice. Charger cases come in handy in this situation. A good charging case can extend the listening period of your headphones by at least 5 to 6 hours.

How can I tell whether my earbuds have enough power?

Examine the earphones’ battery indicator light to see how they are doing. When the earbuds are inserted, the case and earbuds will both charge at the same time. The case can be charged independently of the earbuds. Charged in red. Fully charged in green.

Has Lenovo LP1 noise-canceling technology?

Bluetooth earbuds with active noise cancellation from Lenovo, model number LP1.

Can earbuds be overcharged?

No, it’s not possible to overcharge the earbuds. With any lithium ion product, this should not be a problem.

Do the earbuds from Lenovo include an app?

Install the “Lenovo Smart Wearable” app on your phone to pair, manage, and check for earbud software updates in addition to other functions. 18. Download the Lenovo Smart Wearable app from the APP Store and Google Play.

Lenovo earbuds are waterproof, right?

Lenovo True Wireless Earbuds Bluetooth 5.0 IPX5 Waterproof for Work, Travel, and Gym with USB-C Quick Charge.

What does the Lenovo headphone MF button do?

When linked to your smart device, you can manage calls and music using the MF buttons on the earbuds. After choosing a track, click the MF button on either earbud once to start the track playing and one more to halt it.

Can earphones be placed in the case while charging?

Close the charging case’s cover after putting the earbuds inside. The battery LED within the charging case is red, yellow, or green when the lid is open to show the earbuds’ current battery state. The earphones need about two hours to fully recharge.