V-TAC VT-1001 Energy Storage Power Supply Instruction Manual
- June 9, 2024
- V TAC
Table of Contents
Meaningful Innovation
VT-1001 Energy Storage Power Supply
Instruction Manual
WEEE Number: 80133970
TECHNICAL DATA
| Model | VT-1001 |
|---|---|
| Battery Capacity | 1050Wh |
| Net Weight | 14Kg |
| Wireless Output | 15W |
| Dimension | 366x235x266mm |
| Auxiliary Charge Output | 12V 8.3A,100W |
| Solar energy | 12V-30V, 400W (MAX) |
| AC Output | 230V Pure Sine Wave 1200W, Peak 1800W |
| USB output port | 5V2.4A4, PD65W1, QC18W*1 |
| Battery | Lithium iron phosphate |
| Battery Cycle | ≥2000 |
| Work Temperature | -10∼40°C |
| Charging Temperature | 0-40°C |
| Lighting | 3W |
INTRODUCTION
Thank you for selecting and buying V-TAC Product. V-TAC will serve you the best. Please read these instructions carefully & keep this user manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best.
Multi-Language Manual QR CODE
Please scan the QR code to access the manual in multiple languages.
WARNING
-
Please make sure to turn off the power before starting the installation.
-
Installation must be performed by a qualified electrician.
-
Please read all instructions before using this product.
-
In order to reduce the risk, close supervision is required when using this product near children.
-
The use of accessories recommended or sold by non professional product manufacturers may lead to the risk of electric shock.
-
When the product is not in use, please pull the power plug out of the product socket.
-
It is forbidden to dismantle the product, which may lead to unpredictable risks such as fire, explosion or electric shock.
-
Do not use damaged wires or plugs or damaged output cables to use the product, which may cause electric shock.
-
Please charge the product in a well ventilated place.
Do not restrict the ventilation of the product in any way. -
Please put the product in a well ventilated and dry place to avoid the risk of electric shock due to water intrusion.
-
It is forbidden to expose the product to fire or temperature higher than 130°C, which may lead to fire, explosion and other safety accidents.
-
It is forbidden to use or place the product under high temperature (direct hot sunshine or hot car interior), otherwise the internal battery may overheat, catch fire or function failure, shorten the service life and other risks.
-
Please charge the product every three months to prevent the battery from running out.
This marking indicates that this product should not be disposed of with other
household wastes.
Caution, risk of electric shock.
PACKAGING LIST
PARTS & DESCRIPTION
PRECAUTIONS FOR USE
- ⑦ Press the button, the screen lights up, about 60 seconds after the screen backlight automatically closed.
- When ②④⑧⑨ the button is pressed, the output port is turned on to power the device.
- When the power output port is not used, press the 2,4,8,9 button to turn it off to save power.
- Low temperature may affect the battery capacity of the product, the product can be charged in the temperature range of 0 ~ 40 °C, in the temperature range of-10 ~ 40°C for equipment use.
- The first use of the product is recommended to be fully charged, to avoid the lack of power to your use of inconvenience. After the device is fully charged, the fan will continue to work for about 2 minutes after the charging power cord is unplugged, which is used for cooling the device (the specific time may vary with the scene temperature) , pay attention to prevent dust particles or foreign matter from being inhaled into the equipment, otherwise it will easily lead to internal equipment damage.
- After the discharge is terminated, the device fan will continue to work to reduce the device temperature to a reasonable temperature for about 30 minutes (the time may vary with the scene temperature) . At the same time charge and discharge, current more than 15A or equipment temperature is too high, will trigger automatic power-off protection.
- During the charging and discharging process, please connect the device with the charging and discharging device, then turn on the charging and discharging. Otherwise, there might be a spark.
CHARGING MODE
Before using or storing the product, please use the charger to charge the
product. When charging, the indicator light is blue. The LED screen will
display the current charging ratio and charging power. When the LED screen
shows 100% power, it means full charge. The charging process is about 2.5
hours. The current power can be viewed through the LED screen.2
Standard charger, about 2.5 hours
Car charger about 2.5 hours
400W solar photovoltaic panel, about 3.5hours.
FAQS
Can the product be brought on the plane?
– No, because this product is a lithium battery product.
– According to the international air transport standard regulations, carrying
lithium battery products can not exceed 100Wh.
If the power of the equipment is within the rated output power range of the
product, it cannot be used?
– a. The power consumption of the product is less than 20%; it needs to be
supplemented.
– b. When some equipment’s start, the products which are larger than the peak
value of rated power cannot be used;
Why is there sound when using it?
– The product adopts air cooling system, and the built-in fan is better to
help product heat dissipation. It is normal to have slight noise when using.
Is the charger heating normal when charging?
– Charging charger heating is a normal phenomenon, standard charger in line
with national safety standards, you can rest assured to use!
TROUBLESHOOTING
| FAULT PHENOMENON | TROUBLESHOOTING | SOLUTIONS |
|---|---|---|
| The product cannot be charged | 1.The charger and product are not in good |
contact with the mains power supply (the charging indicator is not on at this
time)| Check whether the charger and product are in good contact with the main
power
2. The contact is good, but the charging indicator is not on| If the charger
is broken, please contact the customer service
3. If the charging indicator light is on, it still can’t be charged| If the
product is broken, please contact the customer service
The product has no output| 1. The connection line between the equipment and
the product is not plugged in properly| Make the equipment well connected with
the product
2. The output port switch is not turned on| Turn on the port output switch,
and the indicator light will be on
3. Low power consumption| Charging the product
4.There is no output after eliminating according to 1.2.3 above| If the
product is broken, contact the customer service for handling
With device output interrupt| 1. The nominal power or instantaneous starting
power of the equipment used is greater than the power of the product| Select
higher power energy storage products
2.If the equipment used is short circuit, an alarm symbol will appear on the
display screen, an alarm sound will be send and the product will automatically
turn off the output within 15 seconds| It is not a product problem.
It is recommended to replace the equipment
3.The output will still be turned off after removing according to the above
1.2 point| If the product is broken, contact the after- sales department for
handling
PARTS & DESCRIPTION
