Choetech BS003 Portable Power Station User Manual

BS003 Portable Power Station
User Manual

Portable mobile energy storage power supply

BS003 Portable Power Station

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention  to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

✉  www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Component name

1. AC output port
2. Vehicle charge/solar charge port
12 V~30 V
3. Cigarette lighter output interface
12 V/10 A
4. Quick charge input interface 380 W
5. Illuminating/rescue lamp
6. Handle
7. Display screen
8. Wireless quick charge 15 W| 9. USB output interface 5 V/3 A
10. Heat dissipation window
11. DC start switch
12. USB output interface quick charge QC3.0
13. 12 V/10 A output interface
14. Type-C output interface
15. Special interface for automobile
battery charge 13.8 V/5 A
16. AC start switch
17. Adapter charge input interface
---|---

Accessories list

Function instruction

DC discharge

1. Press and hold the “DC start switch” for 3 seconds to turn on or off DC, and the ON icon of DC on the power LED screen will be on, then all DC output ports can be used normally, and the current power used will be displayed on the display screen.
2. QC3.0 18 W/Type-C 65 W can charge devices supporting fast charge.
3. Wireless charge: after the DC power is turned on, the mobile phone or device with wireless charge function will be charged automatically when it is placed on the icon,  and the current power used will be displayed on the display screen.
4. Illuminating lamp: after turning on the DC power supply, click the DC key to turn on the illuminating lamp. (Briefly press once to turn on the lamp for a long time, twice to flash, three times to send rescue the signal, and one more press to turn off the lamp)
5. Car battery charge: after turning on the DC power supply, insert one end of the equipped alligator clip connecting wire into the 13.8 V interface of the machine, clamp  the red alligator clip on the positive pole of the battery and the black alligator clip on the negative pole of the battery.
   (Note: reverse connection of positive and negative  poles will damage the machine)

This function can only be used for charging, and it is forbidden to use it directly for ignition.

Model: CN-1000 W

AC discharge
Press and hold the “AC start switch” for 3 seconds to turn on or off the AC software. The AC ON icon of DC on the power LED screen will be on / display the current  output voltage, then the device can be used normally by arbitrarily inserting the load wire into AC output port 1 or port 2, and the current power will be displayed on the  display screen.
Note: please do not use loads that exceed the maximum output power of the equipment. The maximum output power of the equipment is 1000W. If the load exceeds 1000W, the power supply will enter the protection state and cannot be output, and the power supply can be used normally after removing the excess load and restarting.

Charge the device

1. Insert the original standard adapter (25.5 V/5 A) into the “adapter charge port “.
2. Insert the output port of in-vehicle cigarette lighter or solar panel with the specification of 18 V/(≥ 150 W) into the “vehicle charge/solar charge port” of the equipment.
3. Insert the quick charger (25.2 V/15 A) into the “quick charge port”. After arbitrarily inserting the above three charge methods, the current charge power will be displayed  on the LCD display screen of the device, and the battery symbol % will also display the battery charge power one by one.

Product parameters

QC3.0: 18 W 12 V/10 A 13.8 V/5 A
Wireless charge:| 15 W
Battery capacity:| 270 000 mAh/999 WH
Charge time:| More than 90 % for adapter 8.5 H more than 90 %
for quick charge 2.5 H
Temperature range for use:| 0˚C-45˚C/32˚F-113˚F
Temperature range for storage:| -5˚C-35˚C/23˚F-95˚F

Common questions

Q: what is the battery of this device?
– A: Lithium-ion battery.
Q: Is it pure sine wave or modified sine wave?
– A: It is pure sine wave.
Q: How long can this equipment supply electricity?
– A: It depends on the power of your load equipment. It can supply electricity for 2 hours if thepower of the equipment is 500 Wh.
Q: Can the device be charged simultaneously through adapter and solar energy?
– A: No, the system of the equipment can only adopt the principle of priority (whichever is inserted first will be charged first).

Model: CN-1500 W

AC discharge
Press and hold the “AC start switch” for 3 seconds to turn on or off the AC software. The AC ON icon of DC on the power LED screen will be on/display the current  output voltage, then the device can be used normally by arbitrarily inserting the load wire into AC output port 1 or port 2, and the current power will be displayed on the  display screen.
Note: please do not use loads that exceed the maximum output power of the equipment. The maximum output power of the equipment is 1500 W. If the load exceeds 1500  W, the power supply will enter the protection state and cannot be output, and the power supply can be used normally after removing the excess load and restarting.

Charge the device

1. Insert the original standard adapter (25.5V/8A) into the “adapter charge port” .
2. Insert the output port of in-vehicle cigarette lighter or solar panel with the specification of 18 V/(≥ 150 W) into the “vehicle charge / solar charge port” of the equipment.
3. Insert the quick charger (25.2 V/15 A) into the “quick charge port”. After arbitrarily inserting the above three charge methods, the current charge power will be displayed on the LCD display screen of the device, and the battery symbol % will also display the battery charge power one by one.

Product parameters

QC3.0: 18 W 12 V/10 A 13.8 V/5 A
Wireless charge:| 15 W
Battery capacity:| 432 000 mAh/1598.4 WH
Charge time:| More than 90 % for adapter 8.5 H more than 90 %
for quick charge 2.5 H
Temperature range for use:| 0˚C-45˚C/32˚F-113˚F
Temperature range for storage:| -5˚C-35˚C/23˚F-95˚F

Common questions
Q: what is the battery of this device?
– A: Lithium-ion battery.
Q: Is it pure sine wave or modified sine wave?
– A: It is pure sine wave.
Q: How long can this equipment supply electricity?
– A: It depends on the power of your load equipment. It can supply electricity for 2 hours if the power of the equipment is 500 Wh.
Q: Can the device be charged simultaneously through adapter and solar energy?
– A: No, the system of the equipment can only adopt the principle of priority (whichever is inserted first will be charged first).

Model: CN-2000 W

AC discharge
Press and hold the “AC start switch” for 3 seconds to turn on or off the AC software. The AC ON icon of DC on the power LED screen will be on / display the current  output voltage, then the device can be used normally by arbitrarily inserting the load wire into AC output port 1 or port 2, and the current power will be displayed on the display screen.
Note: please do not use loads that exceed the maximum output power of the equipment. The maximum output power of the equipment is 2000 W. If the load exceeds 2000  W, the power supply will enter the protection state and cannot be output, and the power supply can be used normally after removing the excess load and restarting.

Charge the device

1. Insert the original standard adapter (25.5 V/8 A) into the “adapter charge port”.
2. Insert the output port of in-vehicle cigarette lighter or solar panel with the specification of 18 V/(≥ 150 W) into the “vehicle charge / solar charge port” of the equipment
3. Insert the quick charger (25.2 V/15 A) into the “quick charge port”. After arbitrarily inserting the above three charge methods, the current charge power will be displayed on the LCD display screen of the device, and the battery symbol % will also display the battery charge power one by one.

Product parameters

QC3.0: 18 W 12 V/10 A 13.8 V/5 A
Wireless charge:| 15 W
Battery capacity:| 570 000 mAh/2109 WH
Charge time:| More than 90 % for adapter 8.5 H more than 90 %
for quick charge 2.5 H
Temperature range for use:| 0˚C-45˚C/32˚F-113˚F
Temperature range for storage:| -5˚C-35˚C/23˚F-95˚F

Common questions
Q: what is the battery of this device?
– A: Lithium-ion battery.
Q: Is it pure sine wave or modified sine wave?
– A: It is pure sine wave.
Q: How long can this equipment supply electricity?
– A: It depends on the power of your load equipment. It can supply electricity for 2 hours if the power of the equipment is 500 Wh.
Q: Can the device be charged simultaneously through adapter and solar energy?
– A: No, the system of the equipment can only adopt the principle of priority (whichever is inserted first will be charged first).
Q: What is the service life of this equipment?
– A: About 1000 cycles.
Q: How long can 80% power of the device be stored?
– A: 3-6 months, but we recommend charging it every 3 months.

Malfunction investigation

If the following “actions” cannot eliminate your malfunction, please stop using the product and contact the product supplier.

output of the product, resulting in  automatic protection of the product.
2. The ambient temperature for use is too high.| 1. Cancel some loads with excessive power.
2. Turn off the power supply and  wait for cooling.
1| No output for DC| The load current is too large, exceeding the  maximum output of the product, resulting in  automatic protection of the product.| Restart it once and then it can be used normally.

Toxic and harmful substances
Composition and quantity of toxic and harmful substances

0: It indicates that the content of harmful substances in all homogeneous materials is below the limit specified in the standard 2011/65/EU (RoHS).
Warning
Please take notice of the input and output voltage range when using this product. Confirm whether the input voltage and power range required by your equipment are within  the range of energy storage power supply. The correct use of energy storage power supply can prolong its service life.

1. The energy storage power supply needs to be stored in a dry environment. The correct storage method can prolong the service life of the energy storage power supply.
2. If the product is not used for a long time, please charge, and discharge the product every 3 months to improve the service life of the product cell.
3. Do not store the product in a place where the temperature is too high or too low. Too high or too low ambient temperature will shorten the service life of electronic  products and seriously damage the product shell.
4. Do not wipe the product with corrosive chemical solvents. The appearance stains can be wiped with a cotton swab dipped with a small amount of anhydrous alcohol.
5. The product must be handled carefully when being us and please do not fall or disassemble it violently.
6. There is high voltage in this product. Please do not disassemble it by yourself to avoid safety accidents.
7. This product will not be warranted if you disassemble it by yourself.

| Do not use it in the bathroom and other places that are wet or may contact water.
---|---
| Do not modify or remove the battery.
| Please keep young children away from the equipment.
| Do not reverse connect output or input.
| Do not put the product into the fire.
| Do not charge the product in a way exceeding the level.
| The temperature range shall be maintained at the specified 0˚C-60˚C when charging.
| Do not strike or throw the product.
| If there is any abnormality or malfunction during charge, please contact your supplier.
| Do not put the product on flammable substances (bed or blanket) when charging.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller  directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased  design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440
Subject of the declaration:
Title: Portable mobile energy storage power supply
Model / Type: BS-003
The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):
Directive No. 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU

Prague

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 /  EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of  correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of  this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza | Alza.co.uk
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz
• alza.de
• alza.hu
• alza.sk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>