boAt 131 Wireless Gaming Earbuds for Gamers User Manual

boAt 131 Wireless Gaming Earbuds for Gamers

PACKAGE CONTAINS

•  1x air of TWS Earbud:
•  lx Charging C<11se
• lx Type-C Char9:n9 Cable
• 2x Pairs of Extra Earmuffs
•  ll!: Usr Manual
• Jx Warranty Card
• lx Catalogue
•  lx FAO Card

POWER ON (FIRST TIME USER)

Step 1: TO switch the earbuds on (Smart Power On) simply open the lid of the charging cace (when earbuds are inside). Courtesy our IWP (Insta Wake N Pair) technology, the earbuds power on automatically. got connected and enter the connection mode
OR
Long touch the CTC (Capacitive Touch Control) on both earbuds for 3 secs to manually power on the earbuds.
Stop 2: After powering on, the earbuds onter the Connection Mode, indicated by alternate red and biue LED flaches on primary earbud.

CONNECTION MODE

Step 3: Turn on the Bluetooth functionality on your phone/media device & scan
Stop 4: Soarch for Immortal 131 and pair accordingly

Congratulations! Your earbuds are now connected successfully via Bluetooth

Note:

• Pairing mode lasts for 5 minutes. If the pairing time is missed, then you will need to reconnect the earbuds and follow the above-mentioned procedure
• Immortal 131 remembers previously connected devices; once switched on, thearbuds automatically reconnect to the previously connected devices in working range

SINGLE EARBUD USAGE

Step 1 : Please note that both the earbuds can be used in mono mode. Use Smart/ Manual Power On for switching on the desired earbud
Step 2: The selected oarbud automatically onters the connection mode indicated by LED flashes
Step 3: Turn on Bluetooth on your phone/media device and search for “Immortal 131′ to connect
Notes:
To Switch to Stereo mode, simply take out the other earbud from the case. t will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage You cannot skip tracks or return to the previous tracks in Mono (single-earbud) moode

QUICK GUIDE ON FUNCTIONALITIES

• 3 Seconds:Long touch loft CTC for 3 soconds to activate voice assistant
• 3 Seconds Long touch both CTCs for 3 aoconds to manually power on
• 5 Soconds Long touch both CTCs separatoly for 5 seconds to manually power off.
• 5 Seconds Long touch both CTCs for 5 zeconds to perform factory reset.

CHARGING THE EARBUDS

Step 1: Please insert the earbuds back inside the charging case in correct orientation and close the lid. (Red LED will solid on the earbuds and case RGB LED will blink for 10 seconds, Which indicates its in charging state)
Step 2: Once the earbuds get fully charged, the earbuds LED will automatically power off.

Note: Before using the earbuos for the first time, it is recommended to fully charge the earbuds. Also, please keep the licd of the charging case closed while charging.

CHARGING THE CASE

Step: To charge the case, plug one end of the provided cable into the case and connect the other end to a computer/ wall adapter /powerbank, etc. While the case is on charging. RGB LED will be in breathing mode. When the case gets fully charged, the charging case automatically switches off.

BASIC FUNCTIONS

• Voice Assistant: Long touch the left CTC for3 seconds to activate default voice assistant
• Answer Single tap CTC on oither earbud to answer an incoming call
• Hang Up/ Reject Call: Double tap the CTC on either earbud to end/ rejoct call
• Play/Pause Music: Single tap either earbud’s CTC to play or pause music
• Next Track: When playing music, double tap the right earbud’s CTC to skip to the next song
• Previous Track: When playing music, double tap the left earbud’s CTC to return to the previous song

Note: Volume can only be controlled via the media device

VOICE ASSISTANT

Step 1: Long touch the CTC on loft earbud for 3 seconds to activate default smart voice assistant
Step 2 The respective voice ascistant sereen pop up and you may place your commands at oase
Tips: You may try out the following commands,

Note: If the voice assistant doesn’t get triggered, then the functionality has to be first enabled via your media device settings.

BEAST MODE

Long touch the right CTC for 3 seconds to switch to Low Latency mode also known as the BEAST” Mode. Once switchod on, it gots notified via a tound prompt Long touch the right CTC for 3 seconds once again, to turn it off and return to standard Music Mode. Made for the Gamers By Gamers, BEAST Mode reduces the latency significantiy and improves the overall gaming experience

ENX TECH

Our ENx (Environmental Noise Cancellation) tech algorithm canceis out the background noise so that you can be heard crystal cloar via voice calls. One need not activate ENx as the 4x mics are already equipped with the same and activated by default. Deliver your voice without interruptions anywhere traffic, raiway stations, airports, work space; iterally anywhere!

SMART POWER OFF

Step 1: After usage, remove both the earbuds from your ears
Step 2: Place the earbuds back into the charging case in correct orientation and closo the lid

The earbuds automatically switch off (and enter charging mode).

MANUAL POWER OFF

Step 1: Long touch CTC for 5 ceconds (Left & Right separately) to manually power off each earbuds.
Step 2. Once the earbuds get turned off, place them back inside the case and close the lid,

FACTORY RESET

Porform the factory resot in case you feel any difficulty while operating your Airdopes.
NOTE: Before performing recet, clear “Immortal 131” from pairing device history by forgotting device

• Stop 1: Take out both the earbuds from the caso
• Step 2: Long touch CTC on both the earbuds for 5 seconds
• Step 3: Place the earbuds inside the case, close the lid and wait for 5 seconds
• Step 4: Take out the earbuds from the case and perform a fresh connection

Congratulations! Your Immortal 131 has been Recet

SPECIFICATION

WARNING

• Please follow the instructions to operate
• Please don’t use the earbuds in extreme temperatures
• Pleace don’t use the product near water
• Please keep the product away from heat source, as the heat may damage it
• Don’t jam the ports such as charger port, LED port, etc.
• It is recommended to utilize the product below the maximum volum in order to protect hearing and oxtend the ear-buds’ service lifo

Advi sable: The oarbuds may start at a 100% volume and it may neood to be reduced when they are switched on at first. This can be done by using volume control on media device

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>