FOS technology 000-255 Par Zoom Ultra Party Light User Manual
- June 4, 2024
- FOS technology
Table of Contents
FOS technology 000-255 Par Zoom Ultra Party Light
| Channel | DMX Value | Descriptions |
|---|---|---|
| 1 | 000-255 | Zoom 0-100% |
| 2 | 000-255 | Master dimmer 0-100% |
| 3 | 000-255 | Strobe from slow to fast |
| 4 | 000-255 | Red intensity 0-100% |
| 5 | 000-255 | Green intensity 0-100% |
| 6 | 000-255 | Blue intensity 0-100% |
| 7 | 000-255 | White intensity 0-100% |
| 8 | 001-255 | Color Macro |
9
| 000-010| No function
011-119| Color step changing
120-179| Color cross fade
180-255| Color step changeing + cross fade
10| 000-255| Auto program (CH9) speed from fast to slow
SPECIFICATIONS
- Source: 19*15W RGBW high-power LEDs
- Beam angle: 10°-60°motorized zoom
- 0-100% linear dimmer, high-speed strobe
- DMX, Auto, Master/Slave
- DMX Channel: 10ch
- IP20 for indoor use only
- Power input: AC100-240V 50/60Hz
- Power consumption:300W max.
- Dimensions: 226285380mm
- Weight: 6.5 kg
IMPORTANT INFORMATION!
In order to optimize the recovery and recycling of the materials that old
appliances contain and reduce the impact on human health and the environment,
ensure that this product is recycled at the end of its life.
WHAT’S INCLUDED
- 1 x FOS PAR ZOOM ULTRA
- 1 x Power cord
- 1 x User Manual
SAFETY NOTES
- The product is for indoor use only.
- Always turn off, unplug power and allow fixture to cool before servicing.
- Ensure that fixture is properly grounded.
- Please keep this User Guide for future consultation.
- Always make sure that you are connecting to the proper voltage and that the line voltage you are connecting to is not higher than that stated on decal or rear panel of the fixture.
- Always disconnect from power before servicing or replacing fuse.
- Make sure power cord is never crimped or damaged.
- Avaid looking directly into the LED light beam at a close distance!
KEY FEATURES
- Source: 19*15W RGBW high-power LEDs
- Beam angle: 10°-60°motorized zoom
- 0-100% linear dimmer, high-speed strobe
- DMX, Auto, Master/Slave
- DMX Channel: 10ch
- IP20 for indoor use only
- Power input: AC100-240V 50/60Hz
- Power consumption:300W max
PRODUCT OVERVIEW
SETUP
AC Power
This product has an auto-switching power supply that works with an input voltage range of 100 to 240 VAC, 50-60Hz.
Mounting
The FOS PAR ZOOM ULTRA is fully operational in any mounting position, hanging upside-down, side-mounted, or set on a flat level surface, etc.
IMPORTANT!!! Safety cables must always be used when unit is celling or truss mounted. The safety cable must be capable of holding 10 times the weight of the fixture.
OPERATION INSTRUCTIONS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>