OLIGHT i3T EOS Slim EDC Flashlight Desert Tan User Manual
- June 9, 2024
- OLIGHT
Table of Contents
OLIGHT i3T EOS Slim EDC Flashlight Desert Tan
PACKAGE CONTENTS
- i3T EOS, 1*AAA Alkaline battery (installed inside the flashlight), User
SPECIFICATIONS
- Material: AL6061-T6 aluminum alloy unibody design with MilSpec
All above specifications are test results
INSULATING FILM
Before first use, unscrew the tailcap and remove the insulating film Insulating film
BATTERY INSTALLATION
If the battery needs to be changed, make sure that the positive polarity side of the battery faces toward the
AVAILABLE BATTERIES
- 1 x 1.5V AAA alkaline battery(included)
- 1 x AAA lithium battery
- 1 x AAA NiMH battery
When the light is first turned on, it will go to low as the default mode. Soft press without fully clicking for momentary on. Cycle through momentary low and high mode by quickly soft pressing, letting go, and soft pressing again. Deep press for constant on (you will hear a click). Continue to click on and off within 2 seconds after it was turned off to shift between low and high brightness
DANGER
- Do NOT throw the light directly into human eyes. This may cause temporary blindness, or permanent damage to the eyes.
- Do NOT cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials.
- Please do NOT cover a flashlight that is on. The generated heat can cause burning or even unpredictable disasters.
- Please do NOT use batteries other than the ones mentioned in the “available
WARNING
-
Keep out of reach of children.
When the flashlight is working on the high mode, the surface temperature can reach 50°C. Please switch off the flashlight temporarily or turn it to low mode. -
If the light is about to be put aside for a long time or be transported, please
NOTICE
- Ensure battery is inserted with the positive (+) end pointing to the head of the flashlight (LED side).
- When the flashlight is turned on, it will go to low as the default mode. Continue to click on and off within 2 seconds after it was turned off to shift between low and high brightness levels. If it is turned on over 2 seconds after it was switched off, it will go directly to low mode as default again.
- It is normal for the flashlight not being able to reach 180 lumens when the battery voltage is too low (under 1.0V).
WARRANTY
Within 30 days of purchase: Return to the original seller for repair or replacement. Within 5 years of purchase: Return to Olight for repair or replacement. Battery Warranty: Olight offers a one year warranty for all rechargeable batteries. This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents,
USA Customer Support
cs@olightstore.com
Global Customer Support
Customer-service@olightworld.com
Visit www.olightworld.com to see our complete
product line of portable illumination tools.
Olight Technology Co., Limited
Address: 5th Floor, Building A2, Fuhai Information Harbor,
Fuhai Subdistrict, Bao’an District, Shenzhen,
V1. 05, 21, 2018 3.0409.6010.9000
References
- Olight | Illuminate Your World.
- Flashlights, Tactical Light, Outdoor Tools - Olight Official Store- Olight
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>