ELSEMA PE1500 Long Range Retro-Reflective Photoelectric Beam Instruction Manual
- June 4, 2024
- ELSEMA
Table of Contents
ELSEMA PE1500 Long Range Retro-Reflective Photoelectric Beam
Features
- Long range beam, 10 meters
- Input Voltage 12 – 250V AC/DC
- Polarised retro-reflective type
- Polycarbonate casing
- Optional cover for the reflector, HD-15
- Rugged design (IP-66)
- LED indicator beam alignment
- Tamper switch
Application
- Sliding Gates, Swing Gates, or Garage Doors
- Overhead Doors, Conveyers, or Door Entrance
- Boom Gates, Alarm System, or Warehouse Monitoring
Description
The PE1500 is a polarised ultra-sensitive, long-range, retro-reflective photoelectric beam. The sensor module uses a modulated beam which stops interference from the. It works with any Elsema-type automatic gate or door controller cards used on the sliding, swing, or roller doors. It is used as a safety device to control automatic gates and doors. An optional HD-15 hood for the reflector is recommended for outdoor installation.
Technical Data
| Power Source | 12 to 250 Volts AC/DC |
|---|---|
| Standby | 19mA at 24Volts DC |
| Response Time | 10 millisecond |
| Connection | Plug in type terminal block |
| Additional feature | Normally closed (NC) Tamper output. |
| Operating Temperature | -20˚C to 60˚C |
| Relay Output | Common, Normally Open or Normally Close: 0.5 Amps / 120VAC |
| Sensing Range | 10 meters. The range will be reduced in bad weather, fog, |
dust, etc.
Dimensions| 122 (L) x 61(W) x 62(D) mm.
LED Status
| LED Status | Red | Green |
|---|---|---|
| On | Beam is broken | The beam is properly aligned |
| Off | Beam is aligned | xx |
| Flashing | Beam alignment poor | xx |
Accessory
PE1500 Dimensions
PE1500 Wiring Diagram
PE1500 Parts
PE1500 Application
Manufactured by:
Elsema Pty Ltd 31 Tarlington Place, Smithfield NSW 2164, Australia
Ph: 02 9609 4668
Website:http://www.elsema.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>