LEDmaxx SLB3 LED Floor Lamp Instruction Manual

LEDmaxx SLB3 LED Floor Lamp

Tools

Product list

1. base plate
2. pole
3. lamp body
4. accessories bag

Installation Instruction

Manual

Motion Sensor

1. Turn on the lamp.
2. The lamp brightness reduces to 30% when there is no presence in 30min.
3. After another 30min, the lamp switches off automatically when still no presence is detected.
4. The lamp will switches on automatically at once when there is a presence detected.

Daylight sensor

1. Turning on the light and dimming to a comfortable brightness, the daylight sensor will memory this lux value which performs on the desk as a standard lux.
2. When ambient brightness increase (reduce), the light will adjust to reduce (increase) its brightness and guarantee the lux on the desk are the same to that standard lux, or at least close to that standard lux, it may have around 10% tolerance.
3. When every time dimming again on light brightness, the daylight sensor will memory this new lux value which performance on the desk as a new standard lux.

Attention:
The lux value which the light performance on a desk will be affected if there is any change on the desk within the area of 20° angle under the daylight sensor.

Detectable area

Here to tell you how to play Motion Sensor & Daylight Sensor

Adjust the dip switch to the module with a screwdriver.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>