PRODUTECH G680 Outdoor Bluetooth Speaker User Manual
- October 31, 2023
- PRODUTECH
Table of Contents
G680
Outdoor Bluetooth Speaker
User Manual
Dear customer,
Thank you for purchasing the outdoor Bluetooth speaker G680. To ensure correct
operation, please read this user manual carefully before operation.
Important Safety Instructions
◆ Do not use the speaker in special cold and hot environments.
◆ Please avoid the speaker dropping or hitting with a hard object, it may
cause other hardware damage.
◆ Take care when charging the speaker, excessive prolonged charging will
damage the battery lifetime. Charge the speaker to full capacity when using
for the first time.
◆ When battery low, the indicator light will flash and voice prompt “battery
low”, please charge speaker in time.
◆ If does not use this speaker for long time, please charge at least once
within one month, in order to prevent the lithium battery from causing and
damaging because of excessive consumption.
◆ Adjust the volume to appropriate level to avoid disturbing others.
Features
-
Bluetooth 5.0 stereo music
-
Aux-in
Work as the external speaker by connecting to the audio source of computer, mobile, PSP/MP3/MP4 etc. -
USB Flash Disk Music playing
Support MP3/WAV/WMA/FLAC/APE music format, capacity up to 32G -
EQ effect adjustment, with bass enhancement
-
Power bank function
-
Voice guide
The speaker will prompt the working mode and status for easy operation. -
Support light show,with different light themes
-
With battery capacity display
Technical Data
Bluetooth Version: 5.0 ATS2853
Speaker Output: 40+10W
Voltage： DC 5V 2A
Frequency response： 60Hz – 20KHz
Driver: 79mm79mm woofer2 + 36mm tweeter2 + passive radiator2
Built-in Battery: 7.4V 6600mAh (6pcs 3.7V 2200 mAh battery )
Water Resistance: IPX7
Size: 310x142x137mm
Net Weight: 2.4kg （Speaker only）
Package Contents
Bluetooth Speaker, Type-c Cable, User Manual
Slot and Keys
-
Short press: Increase the volume
Long press: Nest track / Next channel -
Short press: Enter the Bluetooth pairing mode
Double press: Enter/Exit TWS mode
Long press: Disconnect the Bluetooth pairing / Reconnect the Bluetooth pairing -
(Bluetooth indicator)
-
Short press: Change LED mode
Long press: Enter voice assistant (e.g. SIRI ) -
(Battery capacity indicator)
-
Short press: Play / Pause
Double press: Change EQ
Short press when incoming call: Answer the call
Short press when on a call: End call
Long press when incoming call: Reject the call -
(TWS indicator)
-
Long press: Power on / off
Short press: Switch the mode
&
In stand-by mode – Double-press: enable power bank feature
In stand-by mode – Short press: disable power bank feature -
Short press: Decrease the volume
Long press: Previous track / Previous channel
11. (Charging Slot)
12. (USB Slot / Power Bank Slot)
13. (AUX In Jack)
Operation Instructions
-
Power on/off
Long press button to power on/off the speaker.
Each time to power on the speaker, The default working mode is Bluetooth mode. -
Bluetooth Mode
- Short press the button to enter the Bluetooth mode.
- Turn on the Bluetooth of your phone, search for nearby devices. The G680 will be found on your mobile pairing list, please connect it. When connected, the speaker Bluetooth indicator will stop twinkle and in Blue.
- Please turn on your phone’s music player, and speaker will play the selected music.
- The speaker will pair with the latest used Bluetooth device automatically. Long press the button to disconnect the current Bluetooth connection. Then other Bluetooth devices can find and pair with the speaker.
- Short press and buttons to forget all the paired devices.
- TWS (True Wireless Stereo) function (only works in Bluetooth mode)
- Power on 2pcs G680 (ensure both speakers are in Bluetooth waiting to pair status).
- Double press the button on either one speaker to enter the TWS pairing mode
- Once two speakers paired, the two speakers’ TWS indicator constant in orange. The speaker Bluetooth indicator flashing in blue is the master speaker,the other one Bluetooth indicator light off is the slave speaker.
- Use your phone to pair the master speaker G680, and play Bluetooth music on both speakers.
- Long press the button on either one speaker to disconnect the TWS pairing.
-
USB Music Playing
Inserting the USB Flash Disk into the speaker, short press the button to enter the USB mode. Short press button to play the USB music.
Please Note: The USB Flash Disk supports memory up to 32G, and support the audio format at MP3, WMA, WAV,APE,FLAC. -
Aux in Mode
Use the 3.5mm audio cable included to connect the speaker to an audio source (PC, MP3/MP4, mobile phone). Short press the button to switch and the speaker will play the music from the audio source. -
Power Bank
Please connect the speaker’s USB slot to the mobile phone / other digital devices’ charging jack via the USB cable. speaker can charge these digital device, with voltage at 5V, max output current at 2A.
The power bank indicator also is in white when it is charging other devices. -
Intelligent power saving function
Under Bluetooth mode, if the speaker is waiting to pair for more than 10 minutes, the speaker will be automatically powered off.
Note: Please long press button again to power on the speaker -
Charging function
Three low battery warnings when the battery is only 20%, 10% and when the machine is turned off. Please charge the battery via a USB adaptor immediately. During charging, the LED battery capacity indicator is flashing one by one. When fully charged, the fourth LED indicator will be on in white.
Note:
Please use the good quality adaptor to charge the speaker.
We suggest use the adaptor specification at 5V/2A
When speaker with low battery capacity, please charge the speaker immediately
The speaker can be charged by different charging current, if using the
computer to charge the speaker, as the current only at 500 mA, the charging
time will be very long.
Troubleshooting
-
What should I do if the speaker can not pair with the Bluetooth device and play music accordingly?
(1) Please check the specification/ the manual of the Bluetooth device (your mobile or computer), and check if the device can support the A2DP stereo audio transmission. If yes, please turn on the A2DP stereo mode.
(2) Ensure the speaker is under the Bluetooth pairing status, if there are many Bluetooth devices nearby, the G680 will not easy to be found. Please turn off other Bluetooth devices. -
What should I do if the speaker get stuck and all the button can not work.
The speaker’s inner system may be wrong with some inappropriate operation. Please try to long press and buttons Factory reset to reset the speaker’s software.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
RF Exposure Information
The device was evaluated to meet general RF exposure requirements. This
equipment should be installed and used with a minimum distance of 0 mm between
the radiator and your body.