SONY VPLL-3007 Projection Lens Instruction Manual
- June 9, 2024
- Sony
Table of Contents
SONY VPLL-3007 Projection Lens
Instruction
Before operating the unit, please read this manual thoroughly and retain it for future reference.
- This lens is designed for use with the Sony Projector.
- For details concerning compatible models, consult with qualified Sony personnel.
- For customers in Europe, Australia, and New Zealand (VPLL-Z3010/VPLL-Z3024/VPLL-Z3032 only)
WARNING
This equipment is compliant with Class A of CISPR 32. In a residential
environment, this equipment may cause radio interference.
For customers in Europe (VPLL-Z3010/VPLL-Z3024/VPLL-Z3032 only)
This apparatus shall not be used in the residential area.
On condensation
If the room temperature where the projector is installed changes rapidly, or
if the projector is moved suddenly from a cold to a warm place, condensation
in the projector may occur. As the condensation may cause malfunction, be
careful in adjusting the temperature settings of the air conditioner. If
condensation occurs, leave the projector turned on for about two hours before
use.
Do not place this product close to medical devices
This product (including accessories) has a magnet(s) that may interfere with
pacemakers, programmable shunt valves for hydrocephalus treatment, or other
medical devices. Do not place this product close to persons who use such
medical devices. Consult your doctor before using this product if you use any
such medical device. (VPLL-Z3010/Z3024/Z3032).
Notes
- Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.
- SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF THIS UNIT OR MADE BY THIRD PARTIES.
- SONY WILL NOT BE LIABLE FOR THE TERMINATION OR DISCONTINUATION OF ANY SERVICES RELATED TO THIS UNIT THAT MAY RESULT DUE TO CIRCUMSTANCES OF ANY KIND.
WARRANTY
For customers in the U.S.A. SONY LIMITED WARRANTY
Please visit http://www.sony.com/psa/warranty for important information and
complete terms and conditions of Sony’s limited warranty applicable to this
product.
For customers in Canada SONY LIMITED WARRANTY
Please visit http://www.sonybiz.ca/pro/lang/en/ca/article/resources-warranty
for important information and complete terms and conditions of Sony’s limited
warranty applicable to this product.
For customers in Europe Sony Professional Solutions Europe
Standard Warranty and Exceptions on Standard Warranty. Please visit
https://pro.sony/support-services/primesupport/support-professional-
solutions-europe-standard-product-warranty for important information and
complete terms and conditions.
For customers in Korea SONY LIMITED WARRANTY
Please visit http://bpeng.sony.co.kr/handler/BPAS-Start for important
information and complete terms and conditions of Sony’s limited warranty
applicable to this product.
Supplied accessory
- Operating Instructions (1)
Specifications
VPLL-3007
- Manual focus, Projected image size: 60″ to 300″ (1.52 m to 7.62 m),
- Maximum external dimensions (W × H × D): 150 × 150 × 222 mm (5 29/32″ × 5 29/32″ × 8 3/4″)
- Mass: Approx. 1.7 kg (3.7 lb 60 oz)
VPLL-Z3009
- Manual focus/zoom, Projected image size: 60″ to 300″ (1.52 m to 7.62 m)
- Maximum external dimensions (W × H × D): 150 × 150 × 217 mm (5 29/32″ × 5 29/32″ × 8 19/32″)
- Mass: Approx. 1.7 kg (3.7 lb 60 oz)
VPLL-Z3010
- Electric focus/zoom, (when attaching to the projector), Projected image size: 60″ to 300″ (1.52 m to 7.62 m)
- Maximum external dimensions (W × H × D): 150 × 150 × 227 mm (5 29/32″ × 5 29/32″ × 9″)
- Mass: Approx. 2.0 kg (4 lb 6.5 oz)
VPLL-Z3024
- Electric focus/zoom, (when attaching to the projector), Projected image size: 40″ to 600″ (1.02 m to 15.24 m)
- Maximum external dimensions (W × H × D): 97 × 105 × 177 mm (3 13/16″ × 4 9/64″ × 6 31/32″)
- Mass: Approx. 1.2 kg (2.6 lb 42 oz)
VPLL-Z3032
- Electric focus/zoom, (when attaching to the projector), Projected image size: 40″ to 600″ (1.02 m to 15.24 m)
- Maximum external dimensions (W × H × D): 97 × 105 × 177 mm (3 13/16″ × 4 9/64″ × 6 31/32″)
- Mass: Approx. 1.2 kg (2.6 lb 42 oz)
Note
The values for mass and dimensions are approximate.
Replacing the Projection Lens
Notes
- Be careful not to drop the projection lens.
- Avoid touching the lens surface.
- Lenses can be scratched easily. When handling lenses, always place them gently on a stable, level surface in a horizontal position.
- The illustration of VPL-FHZ65 is used for the explanations.
Removing
-
Return the projection lens to the center position
While the projector is turned on, press the LENS SHIFT button on the Remote Commander, then press the RESET button on it. The projection lens returns to the center position.
Note
The projection lens cannot be removed unless it has returned to the center position. -
Turn off the projector, then unplug the AC power cord from the wall outlet.
Caution
When replacing the lens, your eyes may be damaged if a strong light accidently gets into your eyes. Before replacing the lens, turn off the projector and then unplug the AC power cord. -
While pressing and holding down the LENS RELEASE button, rotate the projection lens counterclockwise to pull out the lens straight.
Note
For the location of the LENS RELEASE button, refer to the Operating
Instructions of the projector. The location of the button is different
depending on the model.
Attaching
- Fully insert the projection lens with the index on the lens facing toward the top surface of the projector.
- Rotate the lens clockwise until it clicks.
Note
When attaching the projection lens, do not press the LENS RELEASE button.
Adjusting the Projection Lens
| Focus| Peripheral focus (Corner Correction)| Size
(Zoom)
---|---|---|---
VPLL-Z3024/ Z3032| Press the FOCUS button on the Remote Commander or the
control panel of the projector once, and adjust with on the Lens Focus
adjustment screen.| –| Press the ZOOM button on the Remote Commander or the
control panel of the projector, and adjust with .
VPLL-Z3010| Press the FOCUS button on the Remote Commander or the control
panel of the projector twice, and adjust with on the Lens Corner Correction
adjustment screen.
VPLL-3007/ Z3009| Turn the focus lever to adjust the focus.| Turn the
peripheral focus ring to adjust the focus.
| Turn the zoom lever to adjust the size.
Contact Information
http://www.sony.jp/professional/support/.
Sony Corporation Printed in China.
References
- Sony Professional - Products and Solutions To Redefine Your Business
- Sony Professional - Products and Solutions To Redefine Your Business