ZEBRA ET45 Rugged Tablets User Guide

June 9, 2024
ZEBRA

ZEBRA ET45 Rugged Tablets

Accessories that power devices

Wall Charger

USB Wall Power Supply

SKU# PWR-WUA5V12W0XX
USB type A Wall Power Supply adaptor 5V 2.5A

Replace ‘XX’ in SKU as follows to get the right plug style based on region: US (United States)

  • (United Kingdom)
  • (European Union)
  • (Australia)
  • (China)
  • (India)
  • (Korea)
  • (Brazil)
  1. Charges a single ET40/ET45 tablet
  2. 8” tablet charges from 0–80% in less than 2.5 hours
  3. 10” tablet charges from 0–80% in less than 3 hours
  4. Requires a USB cable sold separately

Sold separately

  • USB C to USB A communications and charging cable SKU# CBL-TC5X-USBC2A-01

Single Slot Cradle

Single-slot Charge-only Cradle SKU# CRD-ET4X-1SCG1-01

Single-slot charge-only cradle. Charges a single ET40/ET45 tablet.

  • Accommodates tablet with or without rugged boot, expansion back, or payment back.
  • 8” tablet charges from 0–80% in less than 2 hours.
  • 10” tablet charges from 0–80% in less than 2.5 hours.

Sold separately

  • Power supply SKU# PWR-BGA12V50W0WW and DC cable SKU# CBL-DC-388A1-01.
  • Country-specific AC line cord (options listed in this document) compatible with the power supply SKU.

Multi Slot Cradles

Four-slot Charge-only Cradle for 8” Tablets SKU# CRD-ET4X-4S8I1-01

Four-slot charge-only ShareCradle with T-adapters for 8” tablets. Charges up to four 8” ET40/ET45 tablets.ZHUHAI-M200-Thermal-Label-Printer-
FIG-3

  • Accommodates tablet with or without rugged boot, expansion back, or payment back.
  • T-adapter in each device slot can be flipped/rotated to fit a tablet only configuration or tablet with rugged boot configuration.
  • Includes space to install optional four-slot PowerPack battery charger.
  • 8” tablet charges from 0–80% in less than 2 hours.

Sold separately

  • Power supply SKU# PWR-BGA12V108W0WW and DC cable SKU# CBL-DC-381A1-01.
  • Country-specific AC line cord (options listed in this document) compatible with the power supply SKU.
  • Optional 4-slot PowerPack battery charger SKU# SAC-ET5X-4PPK1-01 and related power cables.

Four-slot Charge-only Cradle for 10” Tablets SKU# CRD-ET4X-4S10I1-01
Four-slot charge-only ShareCradle with T-adapters for 10” tablets. Charges up to four 10” ET40/ET45 tablets.

  • Accommodates tablet with or without rugged boot, expansion back, or payment back.
  • T-adapter in each device slot can be flipped/rotated to fit a tablet only configuration or tablet with rugged boot configuration.
  • Includes space to install optional four-slot PowerPack battery charger.
  • 10” tablet charges from 0–80% in less than 2.5 hours.

Sold separately

  • Power supply SKU# PWR-BGA12V108W0WW and DC cable SKU# CBL-DC-381A1-01.
  • Country-specific AC line cord (options listed in this document) compatible with the power supply SKU.
  • Optional 4-slot PowerPack battery charger SKU# SAC-ET5X-4PPK1-01 and related power cables.

Device cradle cup replacement kit SKU# CRDCUP-4S-ET5TOET4
Replacement kit for conversion of ET5X multi-slot cradle to ET4X multi-slot cradle.

  • Supports conversion from ET5X multi-slot cradle SKU# CRD-ET5X-SE4CO3-01
  • Also supports conversion from select ET5X multi-slot cradle SKU# CRD-ET5X-SE4CO2-01 with base identifier AS-000254-11 or greater
  • Does not include the T-adapters needed to hold ET4X tablets.

Sold separately

  • Required T-adapters for tablets to place in cups SKU# ADP-ET4X-8T4S1-04 or SKU# ADP-ET4X-10T4S1-04 for 8” or 10” respectively.

T-adapters for 8” tablets used in multi slot cradles SKU# ADP-ET4X- 8T4S1-04
Optional T-adapter for 8″ ET40 and ET45 for use in ET4X Four Slot Cradle (Pack of 4).

  • Used as a spare/replacement of T-adapters, or for use with cradle cup replacement kit, or to mix-and-match 8” and 10” tablets in the same cradle
  • Accommodates tablet with or without rugged boot, expansion back, or payment back. T-adapter in each device slot can be flipped/rotated to fit a tablet only configuration or tablet with rugged boot configuration.

T-adapters for 10” tablets used in multi slot cradles SKU# ADP-ET4X- 10T4S1-04
Optional T-adapter for 10″ ET40 and ET45 for use in ET4X Four Slot Cradle (Pack of 4).

  • Used as a spare/replacement of T-adapters, or for use with cradle cup replacement kit, or to mix-and-match 8” and 10” tablets in the same cradle
  • Accommodates tablet with or without rugged boot, expansion back, or payment back. T-adapter in each device slot can be flipped/rotated to fit a tablet only configuration or tablet with rugged boot configuration.

Mounting options for chargers

Rack mounting for space optimization

Optimize available space by mounting any set of four-slot chargers for ET4X on a standard, 19-inch server rack.

  • Ideal for customers that have several devices per location.
  • Compatible with all multi-slot chargers for ET4X.

Mounting bracket SKU# BRKT-SCRD-SMRK-01
Use a multi-slot ShareCradle mounting bracket to attach four-slot ET4X cradles to the wall or mount on a 19-inch server rack.

  • Offers cable routing slots and removable tray that stores / conceals power supply.
  • Adjustable orientations include Horizontal or 25º angle for high density easy access

Other mounting options with power

VESA mounting for versatility

Create an ability to mount ET40 and ET45 tablet to any VESA mount.

  • Ideal for customers that are retrofitting or have a fixed kiosk need.

VESA Adapter for 10” Tablet SKU# ZBK-ET4X-10VESA-01
Expansion Back for 10” ET40 and ET45 tablet with VESA Pattern and DC power input

  • Replaces existing battery cover and screws down to back of tablet.
  • Powers the tablet using the pogo connectors on the back of the tablet.

Sold separately

  • Power supply SKU# PWR-BGA12V50W0WW and DC cable SKU# CBL-DC-388A2-01.
  • Country-specific AC line cord (options listed in this document) compatible with the power supply SKU.
Expansion Backs and PowerPacks

Expansion Backs for 8” and 10” Tablets

8” SKU# ZBK-ET4X-8BTRYBK1-01 10” SKU# ZBK-ET4X-10BTRYBK1-01
Expansion Back for 8” tablets and 10” tablets for use with PowerPack batteries. Includes rotating hand strap and scanner trigger buttons.

  • Replaces existing battery cover and screws down to back of tablet.
  • May be used for ergonomics only, if necessary, for rotating handstrap and scan buttons.
  • Use of PowerPack battery is optional. Battery compartment needs to be covered with a plastic cap/plug in lieu of PowerPack battery.
  • PowerPack in Expansion Back on a tablet is charged only when tablet is placed in a cradle.

Sold separately

  • PowerPack battery SKU# BTRYET5X-PRPK2-01
  • Optional 4-slot PowerPack battery charger SKU# SAC-ET5X-4PPK1-01 and related power cables.

PowerPack Battery for Expansion Backs

SKU# BTRY-ET5X-PRPK2-01 India SKU# BTRY-ET5X-PRPK2-IA

Optional PowerPack battery for use in ET4X and ET5X expansion backs for 8” and 10” tablets. Rechargeable Li-Ion 7.6V 3400mAh 25.84Wh.

  • Battery charges internal battery of the ET4X tablet.
  • Has 5 LED indicators for PowerPack charge status.
  • Hot-swappable in the expansion back, enables continuous use across multiple shifts.

Sold separately

  • Optional 4-slot PowerPack battery charger SKU# SAC-ET5X-4PPK1-01 and related power cables.

Four Slot PowerPack Battery Charger

SKU# SAC-ET5X-4PPK1-01

Toaster-style battery charger. Charges up to four PowerPack batteries.

  • Replaces existing battery cover and screws down to back of tablet.
  • May be used for ergonomics only, if necessary, for rotating handstrap and scan buttons.
  • Use of PowerPack battery is optional. Battery compartment needs to be covered with a plastic cap/plug in lieu of PowerPack battery.
  • PowerPack in Expansion Back on a tablet is charged only when tablet is placed in a cradle.

Sold separately

  • Power supply SKU# PWR-BGA12V50W0WW and DC cable SKU# CBL-DC-388A1-01.
  • Country-specific AC line cord (options listed in this document) compatible with the power supply SKU.
  • PowerPack battery SKU# BTRYET5X-PRPK2-01
Power supply, cables, and adaptors

Power supply and cable matrix

SKU# Description Note
PWR-BGA12V108W0WW Level VI AC/DC power supply brick.

AC Input: 100–240V, 2.8A. DC Output: 12V, 9A, 108W.

| Use with:

  • CRD-ET4X-4S8I1-01
  • CRD-ET4X-4S10I1-01

CBL-DC-381A1-01| DC line cord for running multi-slot cradles from a single Level VI

power supply.

PWR-BGA12V50W0WW

|

Level VI AC/DC power supply brick.

AC Input: 100-240V, 2.4A. DC Output: 12V, 4.16A, 50W.

| Use with:

  • CRD-ET4X-1SCG1-01
  • SAC-ET5X-4PPK1-01
  • ZBK-ET4X-10VESA-01
  • STND-ET4X-10POS1-01

CBL-DC-388A1-01

| DC line cord for running single-slot cradles or battery chargers from a single Level VI power supply.| Use with:

  • CRD-ET4X-1SCG1-01
  • SAC-ET5X-4PPK1-01

CBL-DC-388A2-01

| DC line cord for running VESA mounts and Presentation Stand from a single Level VI power supply.| Use with:

  • ZBK-ET4X-10VESA-01
  • STND-ET4X-10POS1-01

CBL-TC5X-USBC2A-01| USB C to USB A communications and charging cable, 1m long| Use with:

  • PWR-WUA5V12W0XX

PWR-WUA5V12W0XX| USB type A power supply adaptor (wall wart). Replace ‘XX’ in SKU

as follows to get the right plug style based on region:

US (United States) • GB (United Kingdom) • EU (European Union)

AU (Australia) • CN (China) • IN (India) • KR (Korea) • BR (Brazil)

| Use with a communications & charge cable to directly charge ET40 / ET45 device drawing power from a wall socket.

Country-specific AC line cords: grounded, 3-prong

SKU# Country / region Note
23844-00-00R North America (United States, Canada, Mexico) 7.5 feet long
50-16000-678R North America (United States, Canada, Mexico) 3 feet long
50-16000-221R North America (United States, Canada, Mexico) 6 feet long
50-16000-727R Brazil 1.8 meters (6 feet) long
50-16000-680R Argentina 1.8 meters (6 feet) long
50-16000-217R American Samoa, Australia, New Guinea 1.8 meters (6 feet) long
50-16000-218R Japan 1.8 meters (6 feet) long

50-16000-219R

| Antigua, Bermuda, Burma, Channel Islands, Hong Kong, Iraq, Ireland, Malaysia, North Ireland, Scotland, Singapore, United Kingdom, Wales|

1.8 meters (6 feet) long

50-16000-257R| China| 1.8 meters (6 feet) long
50-16000-220R| Europe, Abu Dhabi, Bolivia, Dubai, Egypt, Iran, Korea, Russia, Vietnam| 1.8 meters (6 feet) long
50-16000-671R| Italy| 1.8 meters (6 feet) long
50-16000-669R| India, S. Africa, Africa| 1.8 meters (6 feet) long

Accessories that protect devices

Rugged boots

Rugged boot for 8” tablets SKU# SG-ET4X-8EXOSKL1-01

Rugged Boot / Exoskeleton for 8” ET40 and ET45 tablet

  • Snap-on style; no tools needed
  • Increases drop protection to 5.1ft / 1.55m
  • Has hook points for D-clips and straps
  • Leaves the battery door/cover area open to accommodate expansion backs that go to the back of the tablet
  • Compatible with the single-slot and multi-slot cradles

Sold separately

  • D-clips SKU# SG-ET4X-DCLIPS-01
  • Purpose-built shoulder strap SKU# SG-ET5X-SHDRSTP-01 or 58-40000-007R

Rugged boot for 10” tablets SKU# SG-ET4X-10EXOSKL1-01

Rugged Boot / Exoskeleton for 10” ET40 and ET45 tablet

  • Snap-on style; no tools needed
  • Increases drop protection to 5.1ft / 1.55m
  • Has hook points for D-clips and straps
  • Leaves the battery door/cover area open to accommodate expansion backs that go to the back of the tablet
  • Compatible with the single-slot and multi-slot cradles

Sold separately

  • D-clips SKU# SG-ET4X-DCLIPS-01
  • Purpose-built shoulder strap SKU# SG-ET5X-SHDRSTP-01 or 58-40000-007R

Shoulder Straps and Hand Straps

Note: Straps and D-clips, on tablet/boot in certain orientations, may not be compatible with the multi-slot cradles. Users may need to unhook the D-clips to charge tablet in the cradle.

Breakaway Shoulder Strap SKU# SG-ET5X-SHDRSTP-01

Shoulder strap with breakaway safety feature for 8” and 10” ET4X tablets

  • Requires Rugged Boot and D-clips to hook to use with ET4X tablet
  • Has points near the clip that break when pulled, for safety

Sold separately

  • D-clips SKU# SG-ET4X-DCLIPS-01
  • Rugged boot SKU# SG-ET4X-8EXOSKL1-01 or SG-ET4X-10EXOSKL1-01

Universal Shoulder Strap SKU# 58-40000-007R

Universal shoulder/cross-body strap for 8” and 10” ET4X tablets

  • Requires Rugged Boot and D-clips to hook to use with ET4X tablet
  • 1.5″ wide, 22” to 50″ length

Sold separately

  • D-clips SKU# SG-ET4X-DCLIPS-01
  • Rugged boot SKU# SG-ET4X-8EXOSKL1-01 or SG-ET4X-10EXOSKL1-01

Hand Strap

SKU# SG-ET5X-HNDSTP-01
Hand strap for 8” and 10” ET4X tablets

  • Requires Rugged Boot and D-clips to hook to use with ET4X tablet
  • Plastic handle for secure grip and carrying

Sold separately

  • D-clips SKU# SG-ET4X-DCLIPS-01
  • Rugged boot SKU# SG-ET4X-8EXOSKL1-01 or SG-ET4X-10EXOSKL1-01

D-clips

SKU# SG-ET4X-DCLIPS-01

  • Pair of D-clips that provides required hook points for a shoulder or hand strap on a rugged frame on 8” and 10” ET4X tablet

Stand and related accessories

ET40 and ET45 tablets are retail-ready and hospitality-ready with Zebra’s Presentation Stand to facilitate a kiosk, check-in, self-service, information, or point-of-sale application.

Presentation Stand

SKU# STND-ET4X-10POS1-01

Presentation Stand for 10” ET40 and ET45 tablets

  • Tablet is mounted to the stand and receives power and USB communication using the battery door adapter
  • Stand features height adjustment, tablet tilting for the best view angle, and base rotation to switch between associate and customer controlling the application content based on the tablet orientation
  • Tablet is secured using an electro-mechanical lock; can be unlocked using an application on tablet or a back-up mechanical key
  • Accommodates tablet with or without rugged boot
  • Can be mounted securely to the desk/table using a desktop mounting plate

Sold separately

  • Battery Door Adapter for Presentation Stand SKU# MISC-ET4X-BTDPS-01

  • Desktop Mounting Plate SKU# BRKT-ET4X-DSKPS-01

  • Power supply SKU# PWR-BGA12V50W0WW and DC cable SKU#
    CBL-DC-388A2-01

  • Country-specific grounded AC line cord (options listed in this document) compatible with the power supply SKU.

Battery Door Adapter for Presentation Stand SKU# MISC-ET4X-BTDPS-01

Battery Door for 10” ET4X tablets to provide secure mounting to the Presentation Stand

  • Replaces existing battery cover and screws down to back of tablet

Desktop Mounting Plate

SKU# BRKT-ET4X-DSKPS-01

Desktop Mounting Plate for Presentation Stand

  • Enables secure mounting of Presentation Stand to the desk/table
  • Provides additional security against theft of the stand and blocks the bottom USB and power ports

Presentation Stand Release Tool

SKU# KT-MC18-CKEY-20

Mechanical tool to release the tablet from the Presentation Stand (pack of 20)

  • Used as a back up mechanical release and/or in lieu of SW application.
Stylus and Tethers

Plastic Passive Stylus Set

SKU# SG-TC7X-STYLUS-03

Pack of three passive stylus and coiled tethers

  •  Rigid plastic stylus, conductive Carbon-filled plastic material with 5.0 mm / 0.2” tip and 8.9 cm / 3.5” length is optimized for enterprise durability.
  • Stylus has a clip and tether point to reduce loss. Tether to hand strap on Expansion Back, Rugged Boot, or D-clip on Rugged Boot.
  • Stylus may be clipped on the rotating hand strap of the Expansion Back for PowerPack.

Fiber Tipped Passive Stylus Set

SKU# SG-STYLUS-TCX-MTL-03

Pack of three passive stylus with Micro-Knit Hybrid Mesh Fiber Tip

  • Heavy duty stylus, made from stainless steel and brass, with 12.7 cm / 5” length and Micro-Knit Hybrid Mesh fiber tip provides silent, smooth gliding use
  • Ideal for use in rain or wet conditions
  • Stylus has a clip and tether point to reduce loss.
  • Stylus may be clipped on the rotating hand strap of the Expansion Back for PowerPack.

Sold separately

  • Coiled Tethers (pack of three) SKU# KT-TC7X-TETHR1-03

Coiled Tether Set

SKU# KT-TC7X-TETHR1-03

Pack of three coiled tether for use with plastic or fiber tipped passive stylus

  • Tether to hand strap on Expansion Back, Rugged Boot, or D-clip on Rugged Boot

Accessories that enable productivity solutions

Headsets

Close gaps, Open possibilities with Workforce Connect

Usher in a new era of transformation—one led by your frontline and powered by Zebra Workforce Connect. One where communication and information flows freely and gaps between teams, workflows and data are closed.

With Workforce Connect, hindered workers become effective problem solvers, contributing their best. Critical workflows are streamlined in one place, on one device, equipping workers with the information they need, right at their fingertips. Only Zebra offers the most complete lineup of software and rugged hardware with the scalability, support and service needed to make the greatest impact where it counts—on the frontline. Learn more about you can elevate your frontline workers with Zebra Workforce Connect.

USB-C wired headsets for Workforce Connect

SKU# HDST-USBC-PTT1-01

PTT headset with USB-C connector; one-piece solution.

  • For Push-To-Talk (PTT) applications with volume up/volume down/PTT buttons. Compatible with PTT Express/PTT Pro.
  • Rotating earpiece allows for right or left ear configuration. Mono headset with microphone.
  • Includes clip for attaching PTT button to clothing.

Headsets

  • Rugged Bluetooth and corded HD voice headsets for the most demanding industrial environments
  • When it comes to enabling speech-driven applications and voice communications in warehouses, manufacturing plants and outdoor yards, you need a headset that is specially designed for the job.
  • The HS3100 Bluetooth and HS2100 corded headsets are loaded with features that offer everything you need in an industrial headset.
  • Learn more about how these headsets deliver a superior voice experience.

HS2100 wired rugged headsets

Corded HD voice headset for use with 8” and 10” ET40 and ET45 tablets

  • Dustproof, spray proof, and waterproof.
  • Noise cancellation for a superior voice experience in the noisiest environments.
  • Swiveling boom mutes microphone allowing user to prevent voice pick applications from recognizing non-voice pick conversations.
  • Feather-light for extraordinary comfort.
  • Requires two adapter cables (sold separately): HS2100 to 3.5mm adapter SKU# CBL-HS2100-3MS1-01 and USB-C to 3.5mm adapter SKU# ADP-USBC-35MM1-01
SKU# Description
HS2100-OTH HS2100 Rugged Wired Headset Over-The-Head Headband includes HS2100

Boom Module and HSX100 OTH Headband Module
HS2100-BTN-L| HS2100 Rugged Wired Headset (Behind-the-neck headband left)
HS2100-OTH-SB| HS2100 Rugged Wired Headset (Over-the-head headband) includes HS2100 Shortened Boom Module and HSX100 OTH headband module
HS2100-BTN-SB| HS2100 Rugged Wired Headset (Behind-the-neck headband left) includes HS2100 Shortened Boom Module and HSX100 BTN headband module

HS3100 wireless rugged headsets

Wireless Bluetooth voice headset for use with 8” and 10” ET40 and ET45 tablets

  • Noise cancellation tuned for Voice-Directed Picking applications.
  • Swap batteries on the fly — without losing the Bluetooth connection.
  • Split-second tap-to-pair simplicity using NFC. 15 hours of battery power.
SKU# Description
HS3100-OTH HS3100 Rugged Wired Headset Over-The-Head Headband includes HS3100

Boom Module and HSX100 OTH Headband Module
HS3100-BTN-L| HS3100 Rugged Wired Headset (Behind-the-neck headband left)
HS3100-OTH-SB| HS3100 Rugged Wired Headset (Over-the-head headband) includes HS3100 Shortened Boom Module and HSX100 OTH headband module
HS3100-BTN-SB| HS3100 Rugged Wired Headset (Behind-the-neck headband left) includes HS3100 Shortened Boom Module and HSX100 BTN headband module
HS3100-SBOOM-01| HS3100 Shortened Boom Module (includes microphone boom, battery and windscreen)

Other Accessories – Spare / Replacement

Tablet-Related Spare / Replacements

Spare/Replacement Internal Battery for 8” Tablets

SKU# BTRY-ET4X-8IN1-01 India SKU# BTRY-ET4X-8IN1-IN

Field Replaceable Internal Battery for 8” ET4X tablets. Rechargeable Li-Ion 3.87V 6100mAh 23.61Wh.

  • PowerPrecision Battery. Obtain advanced battery state of health information including charge level and battery age based on usage patterns.
  • Internal Battery charges only when inside the tablet.

Spare/Replacement Internal Battery for 10” Tablets

SKU# BTRY-ET4X-10IN1-01 India SKU# BTRY-ET4X-10IN1-IN
Field Replaceable Internal Battery for 10” ET4X tablets. Rechargeable Li-Ion 3.87V 7600mAh 29.41Wh.

  • PowerPrecision Battery. Obtain advanced battery state of health information including charge level and battery age based on usage patterns.
  • Internal Battery charges only when inside the tablet.

Spare/Replacement Battery Cover for ET4X Tablets 8”

SKU# MISC-ET4X-8BATCVR-01 10” SKU# MISC-ET4X-10BATCVR-01

Spare/Replacement Cover for Battery Housing for 8” or 10” ET40 and ET45

  • Ideal when the original battery cover is lost or damaged.

Accessories-Related Spare / Replacements

Spare/Replacement Rotating Hand Strap

SKU# SG-ET5X-RHTP1-01

Spare/Replacement Rotating Hand Strap used on expansion back

  • Adjustable and 360-degree rotatable handstrap that mounts on the back of the expansion back for ET4X SKU# ZBK-ET4X-8BTRYBK1-01 or SKU# ZBK-ET4X-10BTRYBK1-01
  • Provides secure ergonomic option for holding the device

RAM° TOUGH-DOCK”ZHUHAI-M200-Thermal-Label-Printer-
FIG-35

FOR ZEBRA ET40/ET45 8″ & 10″ To conquer everyday tasks like inventory management, proof of pickup and delivery, or mobile point of sale, RAM° Mounts rugged mount and docking solutions enable Zebra’s new ET40 & ET45 rugged tablets for field use. These docks come with many different options to keep your device connected to power and have the ability to add peripherals to your solution such as scanners, printers, speakers and more. Pair with any modular RAM° Mounts components to create a custom mounting solution for your forklift, truck, workstation and more!

DOCKING OPTIONS

ZHUHAI-M200-Thermal-Label-Printer-FIG-36

COMPATIBLE CHARGERS

ZEBRA ET40/ET45 8

ZHUHAI-M200-Thermal-Label-Printer-FIG-38

ZEBRA ET40/ET45 10ZHUHAI-M200-Thermal-Label-Printer-
FIG-39

MOUNT IT

INTELLISKIN° WITH GDS° TECHNOLOGY” FOR ZEBRA ET40/ET45 8″ & 10″

Ruggedizing everyday tasks like inventory management, proof of pickup and delivery, or mobile point of sale just became easier. With GDS Tech docking solutions and IntelliSkin case system, Zebra’s new ET40 &ET45 rugged tablets can stay connected and protected. Ihese docks and skins come with pogo pin technology to keep your
device connected to power and have the ability to add peripherals while protecting the devices’ ports. This standardized connectivity unlocks the GDS® Ecosystem” of products for a seamless workflow.

INTELLISKIN WITH GDS° TECHNOLOGY

FOR ZEBRA ET40/ET45 8″ & 10″ TM

ZEBRA-ET45-Rugged-Tablets-FIG-1

ZHUHAI-M200-Thermal-Label-Printer-FIG-41

Ruggedizing everyday tasks like inventory management. proof of pickup and delivery. or mobile point of sale just became easier. With GOS® Tech ™ docking solutions and lntelliSkin® case system. Zebra’s new ET40 6 ET45 rugged tablets can stay connected and protected. T hese docks and skins come with pogo pin technology to keep your device connected to power and have the ability to add peripherals while protecting the devices’ ports. This standardized connectivity unlocks the GOS® Ecosystem … of products for a seamless workflow.

INTELLISKIN®

DOCKING OPTIONS

ZHUHAI-M200-Thermal-Label-Printer-FIG-43

GDS® ECOSYSTEM ™ZHUHAI-M200-Thermal-Label-Printer-
FIG-44 ZEBRA ET40/ET45 8″ & 10″

ZHUHAI-M200-Thermal-Label-Printer-FIG-45

Rugged Mounts

Zebra VESA Adapter SKU#ZBK ZBK-ET4XET4X-10VESA10VESA-01 accessory is required for attachment to the ENS VESA mounts.

MD-501
Technology Mounting Solution

  • Includes AMPS and VESA 75/100MM mounting plate
    • Universal mounting configurations, clamps securely to any square, rectangular, or round pole from 1.00″ to 4.00″
    • TPU over-molded steel clamps provide strength & vibration dampening
    • Capable of independently adjusting rotation angle at both ends
    • Supports solutions up to 8 lbs.

MD-3008
Scanner Bucket

  • Accommodates most Zebra scanners
    • Opening on the bottom of the cradle allows user to scan while scanner is holstered
    • Easily mounts to the AMPS pattern on the MD-501
    • Intuitive two-piece design allows for a customized fit

UT-5001

  • Universal Tablet Holder
    • Universal tablet mount attachment for MD-501
    • Uniquely adjustable for almost unlimited use cases
    • Easily adjust screen angle for optimum user experience
    • Compatible with 7″ to 10″ tablets (limitations may apply)

DM-10-102ZHUHAI-M200-Thermal-Label-Printer-FIG-49

  • Display Mount
    • Single VESA 75/100MM mount, supports up to 7lbs.
    • Standard Duty with Free Standing Base
    • Also available without Free Standing Base

C- MAG Series

  • Display Mount
    • Securely Mounts VESA 75/100MM or AMPS compatible devices up to 8lbs
    • Dual knuckle allows for easy adjustments and full articulation
    • No drilling required – 120lbs magnet pull force provides easy, secured damage-free installation

UT-301

  • Universal Rugged Cradle
    • Simple & secure – for 7-9” computing devices, mounts via VESA 75MM
    • Lock and key supplied for extra security, non-electronic mount
    • Simple 3-point adjustment

Versatile Mounts

Zebra VESA Adapter SKU#ZBK ET4X 10VESA 01 accessory is required for attachment to the ENS VESA mounts.

MM-10-116

  • 16” Extruded Pole
    • 1.75” (45mm) dia. Pole
    • Mounting Channels on all 4 sides
    • Back-to-back devices at same height
    • Hides and protects cables
    • Available in 24” height also

MM-10-302

  • Double Pivot Mount
    • Provides display tilt (up 90°/down 32°)
    • Provides 330°display rotation
    • 75mm/100mm VESA mounting
    • Supports up to 15lbs monitors

MM-10-199

  • 16″ (406mm) Free Standing Base
    • Ideal for glass and stone countertops
    • Allows cables to route through counter
    • Hides cables under base
    • Corner pads protect counter

MM- 10-601

  • Scanner Mount
    • Universal design for handhelds
    • Attaches to VESA displays
    • Width adjustable
    • For monitors 15” to 20” wide

MM-10-203

  • Channel Mount
    • Vertically adjustable on Extruded Pole
    • Attaches Displays, Payment, Printers to Pole

M-10-204

  • Channel Arm
    • Vertically adjustable on Extruded Pole
    • Attaches displays, payment, and printers to Pole
    • Extends device away from Pole 8”

MM-10-901

  • Large Cable Bundle Cover Kit
    • Ideal for All-in-One PC’s
    • Hides and protects cable bundles up to 1” dia.
    • Allows cables to route through counter

Learn more about our solutions at: ensco.com

ZEBRA ET4X 8″ & 10″ SLIM DOCKING STATION

Manage your fleets with precision. Stay connected with Gamber-Johnson’s rugged Dual USB Docking Stations specifically designed for the Zebra ET4X 8″ and 10″ rugged tablet series.

Combine the Zebra ET4X enterprise tablet with Gamber-Johnson’s new vehicle docking station, with dual powered USBs for added productivity. Each powered USB port provides 1.5A, strong enough to power a long-range scanner and a printer or other peripheral. This dock will keep the ET4X tablet charged all day long and provides the port replication to connect the right peripheral devices to get the job done.

CERTIFICATION &TESTING

  • MIL-STD 810G Shock/Vibration Tested
  • MIL-STD 810G Environmental Testing: Humidity, High/low temperature, (storage/operational)
  • SAE J1455 Crash Tested
  • Cycle Tested: 30K cycles, docking connector, latching & locking mechanisms
  • RoHS, FCC, and CE Certifications

PORT REPLICATION

  • (2) USB 2.0 – each with 1.5A power

FEATURES

  • Designed for the Zebra ET4X 8″ and 10 ” rugged tablet
  • Zebra’s rugged boot is required in order to work with the docking station
  • Dual powered USB ports; 1.5A for each port for connecting peripheral devices
  • 10-40V power input range to support a wide range of mobile applications
  • All features of tablet are functional while the tablet is safely docked
  • Simple, one-handed docking and release operation:
  • Insert bottom of Zebra tablet into the docking station and push top of the tablet in until the lock engages.
  • Push latch button up with your thumb then remove the tablet from the docking station.
  • POGO pin connector and internal power supply provides power to charge the Zebra tablet while docked
  • Barrel Key lock for theft deterrence
  • VESA 75mm mounting pattern; compatible with Zirkona mounting products
  • Bare Wire, 2.5mm DC Power Jack, and Lite Port Replication options
  • Can be mounted on a flat vertical surface
  • Composite design for reduced overall weight

ACCESSORIES

  • Rugged Lite Keyboard (7160-1449-00)

WEIGHT & DIMENSIONS

ZHUHAI-M200-Thermal-Label-Printer-FIG-62

PRODUCT SELECTION

ZHUHAI-M200-Thermal-Label-Printer-FIG-63

LITE FULL BOARD DOCKING SOLUTIONS
A lite full board docking station will be available. This solution includes:

  • (2) USB 2.0
  • Serial Port
  • Ethernet Port

ZEBRA ET4X 10″ 2-IN-1 ATTACHABLE KEYBOARD

Rugged products designed for the mobile worker everywhere. Gamber-Johnson’s attachable keyboard for the Zebra ET4X Series enterprise rugged tablet is the perfect solution for the mobile worker. Install the tablet in seconds to add the functionality of a keyboard with a smooth responsive feel with features you are familiar with. The USB port can be used to attach a flash drive or another peripheral and the keyboard’s hard carry handle makes it easy to carry your tablet/keyboard combo anywhere. The compact design of the ET4X SeriesS tablet and attachable keyboard make it a perfect productivity tool for the mobile Worker looking for a rug9ged portable solution they can take anywhere.

SPECIFICATIONS

  • USB-A (2.0) Port: 5V@500mA
  • Temperature range: OPERATING: -20°C to 60°C STORAGE: 40°C to 85°C
  • Designed to IP54 ingress specifications
  • Two million actuation per key
  • RoHS, FCC Class B, CE, REACH, and C-Tick Certifications

PORT REPLICATION

  • (2) USB 2.0 – each with 1.5A power

WEIGHT & DIMENSIONS

ZHUHAI-M200-Thermal-Label-Printer-FIG-64

PRODUCT SELECTIONZHUHAI-M200-Thermal-Label-Printer-
FIG-65

FEATURES

  • Designed for the Zebra ET4X 10″ Series tablet without rugged frame Integrated center touchpad with right and left mouse buttons
  • 76-key keyboard with 12 function keys for custom operation
  • Silicone rubber keys with white lettering and a rugged polycarbonate case
  • Easy to instal – POGO docking connector links the tablet to the keyboard
  • Easily connect the tablet to the keyboard; slip the bottom of the tablet into the case and snap the top of the case over the tablet
  • USB 2.0 port (500mA) to attach a mouse, another peripheral, or flash drive
  • Charge the tablet directly from the tablet’s USB-C port
  • All computer features including camera, microphone, speakers, USB-C port, barcode scanner and all control buttons are accessible when the tablet is docked onto the keyboard.
  • Friction hinge and screen footrest with rubber feet help position the tablet at a comfortable viewing angle
  • Hard carry handle with two attachment rings for shoulder strap enhance portability
  • Low-profile ergonomic design for ease of use in a mobile environment
  • Available in US English (7160-1789-00), UK (7160-178901), German (7160-1789-02), French (7160-1789-03),
  • Spanish (7 160-1789-04), Contact Gamber-Johnson for other language options.

ACCESSORIES

  • Shoulder Strap (7400-020-01)

Glacier Computer

For the latest version of this guide and more, please visit: www.zebra.com/et4x

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals