ASUS ROG RYUJIN II 360 CPU Liquid Cooler User Guide
- June 9, 2024
- Asus
Table of Contents
ROG RYUJIN II 360 CPU Liquid Cooler
User Guide
Package contents
NOTE: The Intel Mounting bracket comes pre-installed on the AIO Cooler.
Installing the AIO cooler
NOTE: The illustrations in this section are for reference only, but the installation steps remain the same.
Install the Intel backplate
Install the Intel standoff screws
Install the pump
Remove the Intel Mounting Bracket
Remove the Intel Mounting Bracket
NOTE: Skip step C for TR4 sockets.
Remove the pre-installed heatsink mount then install the plastic collars and standoff screws
Install the pump
Installing the Radiator
Connect the 9-pin USB 2.0 cable
Connect the micro USB cable to the AIO Fan Controller
Connect the ARGB to MB Cable for ARGB Fan lighting (Optional)
NOTE: This package does not include ARGB fans. ARGB fans need to be purchased separately.
Install the AIO Fan Controller
Download control software
Please visit the product support page at https://rog.asus.com/ to download and install the control software.
Support and FAQ
What should I do if a CPU Fan Error error message pops up?
Enter BIOS, then go to Monitor and set CPU FAN Speed to [Ignore].
References
- ROG - Republic of Gamers|Global | For Those Who Dare
- ROG - Republic of Gamers|Global | For Those Who Dare
- ROG - Republic of Gamers|Global | For Those Who Dare
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>