COOLER MASTER Blast Powercore gen5 eW Instruction Manual
- June 9, 2024
- COOLER MASTER
Table of Contents
COOLER MASTER Blast Powercore gen5 eW
Exterior versatile and customizable luminaire with intelligent RGBW light
Blast Powercore gen5, RGBW high-performance LED luminaires combine white and rich, saturated, color and color-changing effects with simplified installation. Blast Powercore gen5 offers a range ofaccessories that allow customizable beam angles for floodlighting, spotlighting, wall washing, and grazing, along with the efficiency and cost-effectiveness of Powercore technology in a rugged die-cast aluminium housing
- Expands customization with a wide range of new accessory options. In addition to the native 10° lens, five different spread lenses can customize the luminaire to produce 20°, 40°, 60°, 80°, and 10° x 40° (asymmetric) beam angles. Three housing color choices (black, gray, and white) – plus the option to add or combine a louver, rock guard, full glare shield, and half glare shield – create new aesthetic possibilities for designers and architects.
- Improves color consistency between all LED luminaires in a family with Chromasync technology. During the manufacturing process a calibrated light measurement device creates an algorithm to define a common color gamut for an entire family of LED luminaires. When Chromasync is enabled, color consistency between luminaires is achieved without having to manually adjust color points on each luminaire.
- Meets ASTM B117 standard for > 1,500 hours of corrosion resistance and ANSI C136.31-2010 standard with a 3G vibration rating.
- Features an innovative, redesigned optical system that improves the quality of light from each LED, enhancing the color uniformity and color mixing capabilities of each Blast Powercore gen5 luminaire.
- Improves durability with new flat lens that prevents water from pooling into the luminaire, keeping the LEDs protected and secure over the course of a luminaire’s lifetime.
- Integrates patented Powercore technology that controls power output to luminaires directly from line voltage – rapidly, efficiently, and accurately. The Color Kinetics Data Enabler Pro merges line voltage with control data and delivers them to luminaires over a single standard cable, dramatically simplifying installation and lowering total system cost.
- Universal power input range of 100 to 277 VAC.
- Works seamlessly with the complete Color Kinetics line of controllers, including ColorDial Pro, iPlayer 3, and Light System Manager – as well as third-party controllers.
For detailed product information, please refer to the Blast Product Guide at https://www.colorkinetics.com/global/products/rgb/blast-powercoregen5-rgbw
Specifications
Due to continuous improvements and innovations, specifications may change without notice.
Output
Beam Angle| 10° X 40°
Lumenst| 1,790
Efficacy (lm/W)| 38
LED Channels| Red/Green/Blue/White
E l ectrical
Input Voltage| 100 to 277 VAC. auto-ranging, 50/60 Hz
Power Consumption (Maximum at full output, steady state)| 47.0 W
Power Factor| 0.99@ 120 VAC
0.9@277VAC
Surge Limits ¶| 2 kV maximum differential (L to N)
4 kV maximum common (L to Gnd or N to Gnd)
For additional Surge Protection Requirement s for LED Lighting Systems, please
refer to www.colorkinetics.com/KB/surge-
protection.
Control
Interface| Data Enabler Pro (OMX/Ethernet)
Control System
Color Kinetics full range of controllers, including Light System Manager, Video System Manager Pro, iPlayer 3, Antumbra iColor Keypad, and ColorDial Pro, or third-party controllers
Remote Monitoring & Management Works with Interact Landmark
L umen Maintenance
Threshold§
| Ambient Temperature|
Reported¶¶
|
Calculated ¶¶
L90| 25 °C
50°C
| >39,715
39,715
| >39,715
39,715
L80| 25 °C
50°C
| >60,000
60,000
| >98,607
98,607
L70| 25 °C
50°C
| >60,000
60,000
| >100,000
100,000
L50| 25 °C
50°C
| –
–
| >100,000
100,000
Physical
Dimensions
(Height X Widt h X DeothJ
| 183.7 x 337.8 x 171.2 mm (7.2 x 13.2 x 6.74 in)
Weight| 3.9 kg (8.2 l b)
Effective Projected Area (EPA)| 0.068 m² (0.73 ft²)
(Luminaire plus Full Glare Shield)
Housing Mater ial| Die-cast aluminium, gray powder-coated finish
Lens| Clear tempered glass
Luminaire Connections| 1.8 m (6 ft) unified power/data cable
Temperature Ranges
-40 to 50 °C (-40 to 122 °F) Operating
-20 to 50 °C (-4 to 122 °F) Startup
-40 to 80 °C (-40 to 176 °F) Storage
Vibration Resistance
Complies with ANSI ( 136.31, 3G
Mechanic al Im pact| IK10
Corros i on Resistance
Complies with ASTM B117 standard for > 1,500 hours
Humidity| O to 95%, non- condensing
Thermal Protection enabled
For additional Thermal Protection information, please refer to
https://colorkinetics.helpdocs.io/article/sh301ducix
Luminaire Run Lengths
To calculate luminaire run lengths and total power consumption for your
specific installation, download the Configuration Calculator from
www.colorkinetics.com/support/install_tool/
Certification and Safety
Approbation| UL/cUL, FCC Class A, CE, PSE, CQC, RCM
Environment| Dry/Damp/Wet Location, I P66
For additional Energy Efficiency Class Information, please refer to
https://colorkinetics.helpdocs.io/article/cviis2p8qq.
† Native beam lumen output measurements comply with IES LM-79-08 testing
procedures. All other beam angle measurements are estimated based on the
native beam measurements.
§ Lxx = xx% lumen maintenance (when light output drops below xx% of initial
output). All values are given at B10, or the median value where 90% of the LED
population is better than the reported or calculated lumen maintenance
measurement.
¶ Minimum surge limits per IEC 61547, tested in accordance with IEC 61000-4-5.
†† When mounting to a junction box, the Color Kinetics wiring compartment
accessory must be used to maintain a 3G vibration rating.
¶¶ Lumen maintenance figures are based on lifetime prediction graphs supplied
by LED source manufacturers. Whenever possible, figures use measurements that
comply with IES LM-80-08 testing procedures. In accordance with TM-21-11,
Reported values represent the interpolated value based on six times the
LM-80-08 total test duration (in hours). Calculated values represent time
durations that exceed six times the total test duration.
Dimensions
Photometrics 10° x 40° frosted lens
Photometric data is based on test results from an independent NIST traceable testing lab. IES data is available at www.colorkinetics.com/global/support/ies.
| Beam Angle | 10° X 40° |
|---|---|
| LED | RGBW |
| Lumens | 1,790 .0 |
| Efficacy (lm/W) | 38 |
Polar Candela Distribution
llluminance at Distance
Zonal Lumen
For lux multiply le by 10.7
Coefficents of Utilization – Zonal Cavity Method
Luminaire and Accessories
| Lum i naire | Item Number | Item 12NC |
|---|
Blast Powercore gen5, RGBW, 100 – 277 VAC, Gray Housing, UL/CE/CQC Luminaire
only. Values in this specification sheet represent both the luminaire and
spread lens combined. Spread lens available below in Associated Part.| 423
-000027 -04| 912400137699
Associated Part|
10° x 40° Spread lens
Trim Ring required for mounting. Must be ordered separately.
| 120-000185 -12| 912400130348
Accessor i es|
Trim Ring, Gray| 120-000185 -15| 912400133530
Louver, Gray| 120-000185 -17| 912400133532
Rock Guard, Gray| 120-000185 -18| 912400133533
Half Glare Shield, Gray| 120-000185 -19| 912400133534
Full Glare Shield, Gray| 120-000185 -16| 912400133531
Wiring Compartment UL/cUL, Gray| 106 -000011 -32| 910503704149
Wiring Compartment CE, Gray| 106 -000011 -42| 910503703277
Architectural Mounting Arm, for use with Blast, Graze, Graze Compact, Burst
Architectural, and Vaya Flood. Short, gray| 120-000206 -00| 912400136642
Architectural Mounting Arm, for use with Blast, Graze, Graze Compact, Burst
Architectural, and Vaya Flood. Medium, gray| 120-000206 -01| 912400136643
Architectural Mounting Arm, for use with Blast, Graze, Graze Compact, Burst
Architectural, and Vaya Flood. Long, gray| 120-000206 -02| 912400136644
Power Supplies|
Data Enabler Pro, 3/4 in / 1/2 in NPT (U.S. trade size conduit)| 106-000004
-00| 910503701210
Data Enabler Pro, PG21/PG13 (metric size conduit)| 106-000004-01| 910503701211
© 2022 Signify Holding. All rights reserved. Specifications are subject to
change without notice.
No representation or warranty as to the accuracy or completeness of the
information included herein is given and any liability for any action in
reliance thereon is disclaimed.
Color Kinetics
https://www.colorkinetics.com/global/products/rgb/blast-powercore-gen5-rgbw
References
- IES Files | Color Kinetics
- Understanding Surge Protection For LED Lighting Systems - Knowledgebase
- Installation Tools | Color Kinetics
- Color Kinetics Energy Label information - Knowledgebase
- Thermal protection and Color Kinetics luminaires - Knowledgebase
- Color Kinetics Official Website | Homepage
- Blast Powercore gen5, RGBW | Color Kinetics
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>