UNI-T UTi 120MS Smart Phone Thermal Camera Module User Manual
- September 17, 2024
- UNI-T
Table of Contents
UNI-T UTi 120MS Smart Phone Thermal Camera Module
Product Information
Specifications
- Model: UTi 120MS
- Part Number: 10401112072X
- Thermal Camera Module
- Warranty: 1 year limited warranty
Product Usage Instructions
Safety Notes:
Before using the UTi 120MS smartphone thermal camera module, please ensure to read and understand the safety notes provided in the manual. Safety precautions are essential to prevent accidents and ensure safe operation.
Installation:
- Make sure the smartphone thermal camera module is compatible with your device.
- Attach the module securely to your smartphone following the manufacturer’s instructions.
Operation:
- Turn on your smartphone and launch the thermal camera application.
- Follow the on-screen instructions to calibrate the camera if required.
- Point the camera at the object or area you want to capture thermal images of.
Maintenance:
- Keep the thermal camera module clean and free from dust and debris.
- Store the module in a safe place when not in use to prevent damage.
Storage:
- Store the smartphone thermal camera module in a cool, dry place away from direct sunlight.
- Avoid exposing the module to extreme temperatures or humidity.
FAQ
- Q: What should I do if my thermal camera module is not functioning correctly?
- A: If you encounter any issues with the performance of the thermal camera module, please refer to the troubleshooting section in the manual. If problems persist, contact customer support for assistance.
- Q: Can I use the thermal camera module with any smartphone?
- A: The compatibility of the thermal camera module may vary depending on the smartphone model. Refer to the product specifications or contact the manufacturer for compatibility information.
Preface
Thank you for purchasing this brand new UTi 120MS smartphone thermal camera module. In order to use this product safely and correctly, please read this manual thoroughly, especially the safety notes. After reading this manual, it is recommended to keep the manual at an easily accessible place, preferably close to the device, for future reference
Limited Warranty and Liability
Uni-Trend guarantees that the product is free from any defect in material and workmanship within one year from the purchase date. This warranty does not apply to damages caused by accident, negligence, misuse, modification, contamination or improper handling. The dealer shall not be entitled to give any other warranty on behalf of Uni-Trend. If you need warranty service within the warranty period, please contact your seller directly. Uni-Trend will not be responsible for any special, indirect, incidental or subsequent damage or loss caused by using this device.
Specifications
Connection
Enter mobile APP. If the thermal camera module (the Device) is not detected, an interface that reminds users to insert it will appear, as shown below.
At this time, users can open the “Settings” page, but other functions are unavailable. After inserting the device, a prompt will pop up, as shown in the following figure.
Screen Indicators/Icons
After the device is loaded, the initial smartphone page is shown in the figure below. The palette is Ironbow by default, and the main page is divided into the following sections.
Gallery
On the initial page, tap “Gallery” (NO.5 in Screen Indicators/Icons) to view the photos/videos. Tap “Select” to select/select all/share/delete photos/videos.
Tap an image to enter an interface where users can share/ delete/preview/edit this image or view its PIP/fusion mode. Tap a video to play/share/fast forward/rewind/full screen play it.
If the PIP or fusion mode is turned on when capturing a photo, tap the icon a when viewing this photo, a small PIP window will appear in the lower right corner. Users can tap to check the fusion status, and drag the upper slider to adjust the fusion ratio of visible light and infrared light.
If the PIP or fusion mode is not turned on when capturing a photo, when users tap the PIP or fusion-icon while viewing this photo, a prompt “No visible light!” will pop up.
In the photo viewing interface, tap “Edit” at the upper right corner to edit the current photo. The specific editing operations are as follows:
- Rotate: Tap icon to change the photo direction.
- Add measurement tools: Tap to display the interface as shown in the lower left. The tools can be added/ moved/stretched/deleted.
- Brush: Tap to display the interface as shown in the lower right. Users can mark a photo in different colors. Tap withdraw the previous mark. (After saving a photo, tap can still withdraw.)
Main Interface
Switch Camera
Tap to switch between the front and rear cameras of the smartphone. The infrared light image will be mirrored.
Fusion
When users tap the icon a slider for adjusting fusion will appear at the top. Dragging the slider can adjust the fusion ratio of visible light and infrared light. Tap the icon at the upper right corner, and then drag the screen to manually adjust the fusion distance.
On Screen Analyzer
Tap to enter the interface for adding measurement tools. Users can add/move/stretch/delete the tools (point/line/ rectangle/circle). Tools added in the main interface can be edited in the editing interface. Tapping the corresponding icon can add a measurement tool and expand a semi-transparent information bar on the right of the interface to display the temperature information of the added tool. When the number of added tools exceeds 6, a prompt “Exceed max tools” will pop up. If users drag a tool to change its position, its temperature information will be updated synchronously. Select a tool and tap the Delete icon (NO.5 in the figure below to delete it.
Palettes
In the main interface, tap, and the optional palettes will show on the top of the screen, including Ironbow, Rainbow, White Hot, Red Hot, Black Hot, Lava, Rainbow НС.
PIP
Tap In, and the APP will turn on the smartphone camera and display a small PIP window. Tap the icon again to turn it off.
Image Capture/Video Recording
Slide the camera icon left/right to switch between Image Capture and Video Recording modes. Both photos and videos will be automatically saved in “Gallery” (NO.5 in Screen Indicators/Icons).
Slide the camera icon left/right to enter the video mode. Tap video icon to record videos, and the recording duration will be displayed in the lower right corner. Tap the video icon again to end the recording.
Shutter Calibration
- a. When the device is on, Shutter will automatically activate for calibration according to ambient changes or the different temperature of measured target.
- b. Tap the cross cursor to activate Shutter manually.
Settings
Tap to enter the setting interface. Users can perform the following functions.
Cautions
- Do not use soluble liquids on the device, as it may cause damage.
- When using the device, please try to keep it stable and avoid violent shaking.
- Please do not violently disassemble the product to avoid irreversible damage.
- Please avoid hard objects contacting the device lens.
- Please do not point the product lens at high-intensity energy sources (including the sun, laser emission equipment and the reflection sources of these equipment), otherwise, it may affect the measurement accuracy, and damage the infrared detector of the product.
- Please put the product into the carrying box when it is not used.
- Due to different batches, the materials and details of actual products may be slightly different from the graphic information. Please refer to the goods received.
- The experimental data in the manual are theoretical values and all from Uni-Trend’s internal laboratories, for reference only. Customers cannot use them as bases for placing orders. If users have any questions, please contact customer service.
Compatible Models
- iPhone 14 Pro Max, iPhone 14 Pro, iPhone 14,
- iPhone 13 Pro Max, iPhone 13 Pro, iPhone 13,
- iPhone 13 mini,iPhone 12 Pro Max, iPhone 12 Pro,
- iPhone 12, iPhone 12 mini, iPhone 11 Pro Max,
- iPhone 11 Pro, iPhone 11, iPhone XS Max,
- iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus,
- iPhone 8, iPhone 7 Plus, iPhone 7, iPhone 6s Plus,
- iPhone SE (2nd generation), iPhone 6s,
- iPhone 6 Plus, iPhone 6
UNI-TREND TECHNOLOGY (CHINA) CO., LTD. No. 6, Gong Ye Bei 1st Road, Songshan Lake National High-Tech Industrial Development Zone, Dongguan City, Guangdong Province, China 15030014
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>