Sunco Lighting PRE-36-26309 16 In. Acrylic Bottom Lens Instruction Manual
- June 9, 2024
- Sunco Lighting
Table of Contents
PRE-36-26309 16 In. Acrylic Bottom Lens
Instruction Manual
16” REFLECTOR INSTALLATION
FOR 100-300W LED COMPASS HIGH BAYS
WARNING Before installing, servicing, or performing routine maintenance
upon this equipment, follow these general precautions:
- Turn off the power before installation or performing any maintenance.
- Avoid prolonged eye contact with light while it is on.
- Account for small parts and destroy packing material, as these may be hazardous to children.
26309 • ACRYLIC REFLECTOR
Kit includes: 1 Reflector and 3 Screws.
- Match the holes on the reflector to the threaded holes on the fixture. Insert screws (x3). (Fig. 1)
- Tightening the screws completely to secure the reflector to the fixture. (Fig. 2)
36309 • ACRYLIC BOTTOM LENS • Optional
Kit includes: 1 Lens, 1 Metal Ring and 1 Spring.
- Match lens to the reflector, place the metal ring around the lens and reflector. (Fig. 3)
- Attach spring to the metal ring where the ends over lap. (Fig. 4)
Specifications subject to change without notice.
Photos and line drawings may not be to scale and are for general reference
only.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>