milwaukee M12 RCDAB+ Radio Charger Instruction Manual
- June 9, 2024
- Milwaukee
Table of Contents
- milwaukee M12 RCDAB+ Radio Charger
- Instruction
- BLUETOOTH
- TECHNICAL DATA
- RADIO SAFETY WARNINGS
- CHARGER SAFETY WARNINGS
- SPECIFIED CONDITIONS OF USE
- EC-DECLARATION OF CONFORMITY
- MAINS CONNECTION
- BATTERIES
- CHARGER CHARACTERISTICS
- BUTTONS
- TRANSPORTING LITHIUM BATTERIES
- MAINTENANCE
- SYMBOLS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
milwaukee M12 RCDAB+ Radio Charger
Instruction
If the radio is connected to AC power, the battery is charging.
If the radio is not connected to AC power, the radio is on battery power.
BLUETOOTH
PAIRING
For first connection to a Bluetooth device, the Pairing must be performed.
Connecting
When the radio locates an already paired Bluetooth device, the name of the
device will be shown on the radio’s display.
Devices connected to the USB port are supplied with power.
Any device that uses more than 2,1 A of DC electrical current will trip a
self-resetting function and disable the output.
Batteries for backup when battery pack is removed.
TECHNICAL DATA
- AC/DC Adaptor input ………………………………………………………………………………… 100-240 V
- AC/DC Adaptor output ………………………………………………………………………………………. 14 V
- Rated input ……………………………………………………………………………………………………… 42 W
- Battery Voltage ………………………………………………………………………………………………… 12 V
- Weight without packing and battery ………………………………………………………………….. 1,75 kg
- Tuning range AM …………………………………………………………………………………. 522 – 1620 kHz
- Tuning range FM …………………………………………………………………………………… 87,5 – 108 MHz
- Tuning range DAB+ ………………………………………………………………………………… 174 – 240 MHz
- Charger output…………………………………………………………………………………………………. 12 V
- Quick charge current ………………………………………………………………………………………….. 1 A
- USB output …………………………………………………………………………………………… 5,0 V / 2,1 A
- Bluetooth Version ……………………………………………………………………………………………. 4.2
- Frequency band(s) of Bluetooth ……………………………………………………………… 2402-2480 MHz
- Maximum radio-frequency power transmitted in the frequency band(s) …………………………………………………………………………………. 5,81 dBm
Charge Time
- Li-Ion 12 V / 1.5 Ah ……………………………………………………… about ……………………….. 1,5 h
- Li-Ion 12 V / 2.0 Ah ……………………………………………………… about ………………………….. 2 h
- Li-Ion 12 V / 3.0 Ah ……………………………………………………… about ………………………….. 3 h
- Li-Ion 12 V / 4.0 Ah ……………………………………………………… about ………………………….. 4 h
- Li-Ion 12 V / 6.0 Ah ……………………………………………………… about ………………………….. 6 h
- Recommended ambient operating temperature …………………………. …………………….-18 …. +40 °C
- Recommended battery Type …………………………………………………… …………………………M12B…
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fi re and/or serious injury. Save all warnings and instructions for future reference.
RADIO SAFETY WARNINGS
Never disassemble or modify this apparatus in any way.
Do not use this apparatus near water.
Clean only with dry cloth. Certain cleaning agents and solvents are harmful to
plastics and other insulated parts. Keep the apparatus handle clean, dry and
free of oil or grease.
Refer all servicing to qualified service personnel.
Do not install near any heat sources.
The ventilation should not be impeded by covering the ventilation openings
with items, such as newspapers, table-cloths, curtains, etc.
No flame sources, such as lighted candles, should be placed on the apparatus.
It shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus.
Do not place the product in closed bookcases or racks without proper
ventilation.
Where the mains plug is used as the disconnect device, the disconnect device
shall remain readily operable.
Do not stand on unit.
Warning! To reduce the risk of fi re, personal injury, and product damage due
to a short circuit, never immerse your tool, battery pack or charger in fluid
or allow a fluid to fl ow inside them. Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and bleach or bleach containing
products, etc., can cause a short circuit.
CHARGER SAFETY WARNINGS
Do not dispose of used battery packs in the household refuse or by burning
them. Milwaukee Distributors offer to retrieve old batteries to protect our
environment.
Do not store the battery pack together with metal objects (short circuit
risk).
Use only Milwaukee M12 System chargers for charging Milwaukee M12 System
battery packs. Do not use battery packs from other systems.
Caution! Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.
The following battery packs can be charged with this charger: Do not try to
charge non-rechargeable batteries with this charger.
No metal parts must be allowed to enter the battery section of the charger
(short circuit risk).
Caution!
Risk of explosion if the battery is replaced by an incorrect type;
- high or low extreme temperatures that a battery can be subjected to during use, storage or transportation,
- low air pressure at high altitude,
- replacement of a battery with an incorrect type that can defeat a safeguard (for example in the case of some lithium battery types),
- disposal of a battery into fi re or a hot oven, or mechanically crushing or cutting of a battery,
- or leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas,
- or a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
Never break open battery packs and chargers and store only in dry rooms. Keep
dry at all times.
Do not touch the tool with conducting objects.
Never charge a damaged battery pack. Replace by a new one.
Before use check machine, cable, and plug for any damages or material fatigue.
Repairs should only be carried out by authorised Service Agents.
This appliance is not intended to be used or cleaned by persons with reduced
physical, sensory or mental capabilities, or lack of experience or knowledge,
unless they have been given instructions concerning the safe use of the
appliance by a person legally responsible for their safety. They should be
supervised whilst using the appliance. Children shall not use, clean or play
with this appliance, which when not in use should be secured out of their
reach.
SPECIFIED CONDITIONS OF USE
The radio charger can charge Milwaukee System 12 V batteries.
The radio is suitable for reception of broadcasting and to import audio sound
of different devices via Bluetooth and analog audio connection.
Via USB connection the radio can charge USB devices.
This radio is designed to withstand harsh operating environments as well as
unintentional drops.
Do not use this product in any other way as stated for normal use.
EC-DECLARATION OF CONFORMITY
Hereby, Techtronic Industries GmbH declares that the radio equipment type M12 RC is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://services.milwaukeetool.eu.
MAINS CONNECTION
Connect only to single-phase a.c. current and only to the system voltage indicated on the rating plate. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II.
BATTERIES
Low Battery Indicator:
When the radio is powered by a battery pack and its charge falls below 10%,
the low battery indicator is displayed.
Battery Pack Protection:
To protect the life of the battery pack, the radio will shut off when the
battery’s charge becomes too low. If this happens, plug radio charger to a
mains connection and charge the battery pack.
Battery packs which have not been used for some time should be recharged
before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery
pack. Avoid extended exposure to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, after use, the battery packs have to be fully
charged.
CHARGER CHARACTERISTICS
After inserting the battery into the reception of the charger the battery will
automatically be charged (red lamp is illuminated continuously)
When a hot or cold battery pack is inserted into the charger (flashing red
lamp), charging will begin automatically once the battery reaches the correct
chaging temperature
(0°C…60°C).
Charging time varies depending on the battery temperature, charge needed and
the type of battery pack being charged.
If both LEDs fl ash at the same time, either the battery has not been
completely mounted or there is a fault in the battery or the charger. For
safety reasons you must stop using the charger and battery immediately and
have them inspected by an Milwaukee Customer Service Centre.
BUTTONS
- Power on
- Power off
- cycle between DAB, FM, AM
- Bass and treble – press and hold
- enter menu – press and hold
- select menus
- Cycle trough presets in AM or FM mode
- display time
- setting time – press and hold
- entering Bluetooth mode directly
- Volume
- tuning in AM or FM mode
- seeking in AM or FM mode – press and hold
- selecting in DAB mode next station
- skipping in Bluetooth mode
- cycle between menu items
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements.
Transportation of those batteries has to be done in accordance with local,
national and international provisions and regulations.
- The user can transport the batteries by road without further requirements.
- Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations.
- Transport preparation and transport are exclusively to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts.
When transporting batteries:
- Ensure that battery contact terminals are protected and insulated to prevent short circuit.
- Ensure that battery pack is secured against movement within packaging.
- Do not transport batteries that are cracked or leak. Check with forwarding company for further advice
MAINTENANCE
If the supply cord of this appliance is damaged, it must only be replaced by a
repair shop appointed by the manufacturer, because special purpose tools are
required.
Use only Milwaukee accessories and Milwaukee spare parts. Should components
need to be replaced which have not been described, please contact one of our
Milwaukee service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the ten-
digit No. as well as the machine type printed on the label and order the
drawing at your local service agents or directly at: Techtronic Industries
GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
-
CAUTION! WARNING! DANGER!
-
Always disconnect the plug from the socket before carrying out any work on the machine.
-
Remove the battery pack before starting any work on the machine.
-
Please read the instructions carefully before starting the machine.
-
Class II tool, tool in which protection against electric shock does not rely on basic insulation only, but in which additional safety precautions, such as double insulation or reinforced insulation, are provided.
There being no provision for protective earthing or reliance upon installation conditions. -
Safety class III
-
Caution! Risk of electric shock.
-
Indoor or dry location use only.
-
Do not burn used battery packs.
-
Never charge a damaged battery pack. Replace by a new one.
-
Do not dispose electric tools, batteries/rechargeable batteries together with household waste material. Electric tools and batteries that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. Check with your local authority or retailer for recycling advice and collection point.
-
European Conformity Mark
-
British Confomity Mark
-
Ukraine Conformity Mark
-
EurAsian Conformity Mark
Copyright 2021
Techtronic Industries GmbH
Max-Eyth-Str. 10
71364 Winnenden
Germany
+49 (0) 7195-12-0
www.milwaukeetool.eu
Techtronic Industries (UK) Ltd
Fieldhouse Lane
Marlow Bucks SL7 1HZ
UK
References
- Milwaukee Tool Europe | Cordless Power Tools, Outdoor Tools, Hand Tools, PPE, Work wear. Storage and Accessories. | Milwaukee Tools Europe
- Home - Identity Digital
- Milwaukee Services
- Milwaukee Tool Europe | Cordless Power Tools, Outdoor Tools, Hand Tools, PPE, Work wear. Storage and Accessories. | Milwaukee Tools Europe
- Loading...
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>