DEWENWILS HORS11B Outdoor Wireless Remote Control Outlet Instruction Guide
- June 9, 2024
- dewenwils
Table of Contents
DEWENWILS HORS11B Outdoor Wireless Remote Control Outlet
Specifications
- Package Dimensions: 6.69 x 4.88 x 2.05
- Batteries: 1 Lithium Metal batteries
- Connector Type: Plug in
- Current Rating: 15.00 amps
- Material: PPE+PS
- Maximum Power: 1875.00 watts
- Mounting Type: Plug-In Mount
- Operating Voltage: 120.00 volts
- Operation Mode” ON-OFF-ON
- Switch Type: Remote Switch
- Voltage: 125.00
- Wattage: 1875.00 watts
- Brand: DEWENWILS
Introduction
You may use a wireless remote control to remotely operate outdoor electrical equipment and lighting using an outdoor wireless remotely control outlet. Because the outlet has a 2-foot extension chord, it is simple to put it in a practical spot. The wireless remote control makes it simple to manage outdoor lights and appliances since it can be used to switch the outlet on or off from a distance. Some outdoor wireless remote control outlets are approved for outside usage and waterproof, guaranteeing trustworthy functioning in a range of weather scenarios. They are a hassle-free option for managing outdoor lights and appliances since they are often simple to install and do not need any wire.
What’s In the Box?
- 1 x Exterior Remote Control Power Switch
- 1 x Remote Transmitter
- 1 x CR2032, 3V Battery (Installed)
- User Guide
Residence Automation
Christmas trees, string lights, fountain pool pumps (1/2 HP), sprinkler systems, security lighting, and appliances can all be turned ON or OFF at the press of a button without the need to walk outdoors on extremely cold or hot days or to plug and disconnect every time in the dark. Access challenging outlet outlets; control heaters, fans, floor lamps, and ceiling lights without leaving your comfortable bed in the cold.
With the Dewenwils wireless remote control plug outlet adaptor, your life will be easier.
2-foot extra-long extension cord
- A 2 FT long SJTW 14/3C power cable is included with this waterproof outdoor power strip.
- Give users greater freedom when using GFCI outlets outdoors and make it easier to use equipment or outlets that are difficult to access.
- The outlet must be positioned with the outlets facing downward and at least 2 feet above the ground in order to prevent water immersion.
Make Your Life More Comfortable and Simple
Simple and quick installation;
- No coding is required;
- There is no sophisticated setup required, and WIFI connection strength is unimportant.
- Conquer difficult-to-reach outlets by using electrical gadgets in difficult-to-reach places anytime you want from anywhere in the house.
- Make your life convenient, safe, and energy-efficient. Ideal for the elderly, pregnant women, those with restricted mobility, or anyone who suffers from back discomfort.
Strong Remote Outlet
Push a button from inside the home to remotely turn on or off string lights, holiday decorations, landscape lighting fixtures, security, and other appliances using up to 15A / 1875W resistive, 1000W tungsten, and 1/2HP.
Water-Resistant Design
Waterproof casing and features; suitable for indoor and outdoor use Standard outlets can supply the required power; a resilient and strong shell that fends against abrasion, wetness, cold, and sunlight exposure
100-foot command range
A strong RF signal does not require a line of sight between the remote controller and receiver; it can go through walls and doors without causing any interference and has a range of up to 100 feet in open spaces.
Extra Long Cord 2 Feet
Features a 2 FT SJTW 14/3C heavy gauge thick extension cable that is extremely length, simple to adapt for a variety of outdoor receptacles, and offers greater versatility and convenience.
Features
- Three-prong plug
- Three-prong grounded outlet
- A mounting point
- Automatic Switch
Notes
In order to conserve energy, the wireless switches are left set to “OFF” when
the power comes back on.
Frequently Asked Questions
How do I set up the wireless remote control outlet?
You have to first connect the wireless remote control outlet to a power source. After that, you have to connect the remote control transmitter to the outlet.
How do I program the wireless remote control outlet?
You have to press and hold the ON/OFF button on the remote transmitter for about 3 seconds until you hear a beep. Then, you have to press and hold the ON/OFF button on the remote transmitter for about 3 seconds until you hear another beep.
How do I change the code of the wireless remote control outlet?
You have to press and hold both ON/OFF buttons on both the remote transmitter and wireless remote control outlet at the same time until you hear a beep. Then, you have to enter a new code by pressing any button on either device.
What is the maximum distance between my wireless remote control outlet and my remote transmitter?
The maximum distance between your wireless remote control outlet and your remote transmitter is 100 feet.
How many codes can I set up for my wireless remote control outlet?
You can program up to 3 codes for your wireless remote control outlet.
Are there three grounded outlets on this?
There is only one outlet and a 2-foot-long wire for the remote control. We have a 6-inch corded remote with three outlets.
Can I use many of them with different remotes separately? I intended to utilize seven of them, each with a remote control.
As long as you can get the various channels, none of the ones I have a conflict with one another. I have seven of their gadgets, six of which have a single outlet and a remote for each outlet, and one of which has a remote with three buttons that can operate three different outlets. As long as you can receive several channels, everything works well with no interference. They are all worn and some are next to one another in my garage.
I wish to have three independent controllers; I don’t want one remote to switch on all three at once. Can I get three of these?
It is, indeed. If you buy three of these remote-control outlets, you may use one remote to turn on or off one outlet while the other two are controlled independently.
Will a Ridgid 14-gallon shop vac that I bought at Home Depot work with this?
As long as you don’t exceed the unit’s 15 AMP rated limit, you may use it to remotely power anything.
Can I use the outlet indoors in a bedroom while keeping it on my carpeted floor?
The outlet shouldn’t be placed on the carpet, in my opinion. Do not do that, please. The merchandise should ideally be kept two feet from the ground.
Why are there two buttons on the remote?
Both buttons are in the ON position. You may remotely operate the switch in the other rooms without maintaining line of sight by using the separate ON/OFF button.
How bright are the LEDs on the transmitter and receiver?
Both the receiver and the transmitter’s leds are bright, making it easy to see the operational condition.
May I select the channel I require so I can use a single remote to turn on and off all of my devices?
May I get three of these so that I can control three different plugs separately? I don’t want one remote to turn on all three at once; instead, I want to associate each remote with a different plug so that I can operate each socket independently.
Can a garage door opener be powered by this?
It will give the opener electricity, but it won’t let a door open or close. That would necessitate a system that operated similarly to the opening controls, which ought to be included in your opener. The control system will not be replaced by this.