CEARTRY Treadmill 300 lb Capacity Under Desk Instruction Manual

CEARTRY Treadmill 300 lb Capacity Under Desk

TREADMILL DIAGRAM

SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

This treadmill is intended for in-home use only; do not use this treadmill in a commercial or institutional setting.
WARNING: All EXERCISERS MUST READ ALL INSTRUCTIONS BEFORE USING THE TREADMILL.

• Heart rate monitoring systems may be inaccurate for some individuals. Over-exercising may result in serious injury or death. If you feel faint, stop exercising immediately.
• Equipment should be immediately taken out of use if it fails to work properly or when a warning is presented electronically.

WE STRONGLY recommends seeing a physician for a complete medical exam before undertaking an exercise program, particularly if the user has a family history of high blood pressure or heart disease, is over the age of 45, smokes, has high cholesterol, is obese or has not exercised regularly in the past year. Additionally, we recommend consulting a fitness professional on the correct use of this product. If at any time while exercising the user experiences faintness, dizziness, pain or shortness of breath, he or she must stop immediately.

WARNING:

• To reduce the risk of electrical shock, always unplug this product before cleaning or attempting any maintenance activity. Do not handle the plug with wet hands.

• Do not move the equipment by lifting the console. Do not use the console as a handlebar during a workout.

• Keep equipment stable on flat ground.

• Replace warning labels that may be worn, damaged or m1ssmg.

• Replace any non-working or damaged components; remove the unit from service until repair is performed.

• Risk of personal injury-crushing hazard when treadmill is in operation. Keep feet, hands, and fingers away from moving parts.

• To reduce the risk of bums, fire, electric shock or injury, it is imperative to connect each product to a properly grounded electrical outlet.
  A risk of electrical shock may result from improper connection of the equipment grounding conductor. Check with a qualified electrician if you are unsure about proper grounding techniques. Do not modify the plug provided with this product. If it will not fit an electrical outlet, have a proper outlet installed by a qualified electrician. Your fitness product must be properly grounded to reduce risk of shock if the treadmill malfunctions. Your treadmill is equipped with an electrical cord, which includes an equipment grounding conductor and a grounding plug. The plug must be inserted into an outlet that has been properly installed and grounded in accordance with all local codes and ordinances.

• To reduce the risk of bums, fire and electric shock or injury to persons, follow these instructions:

  • This appliance should never be left unattended when plugged in.
  • Do not use any type of extension cord with this product.
  • Unplug it from the outlet when not in use and before any servicing.
  • Do not operate the equipment while being covered with a blanket, plastic, or anything that insulates or stops airflow

CAUTION:

• Health related injuries may result from incorrect or excessive use of exercise equipment.
• Any changes or modifications to this equipment could void the product warranty.
• To disconnect, tum power OFF at the ON/OFF switch if applicable, then remove plug from electrical outlet.
• Never operate the product if it has a damaged power cord or electrical plug, or if it has been dropped, damaged, or even partially immersed in water.
• Position this product so the power cord plug is accessible to the user.
• Keep the power cord away from heated surfaces. Do not pull the equipment by the power cord or use the cord as a handle. Do not run the power cord along the side or under the treadmill.
• If the electrical supply cord is damaged it must be replaced by the manufacturer, an authorized service agent, or a similarly qualified person to avoid a hazard.
• Do not use this product in areas where aerosol spray products are being used or where oxygen is being administered. Such substances create the danger of combustion and explosion.
• Close supervision is necessary when used near children under the age of 15, or disabled persons.
• Do not use this product outdoors, near water, while wet, or in areas of high humidity including extreme temperature changes.
• Never insert objects into any openings in this product. If an object should drop inside, tum off the power, unplug the power cord from the outlet and carefully retrieve it.
• Never place liquids of any type directly on the unit except in the accessory tray or bottle holders. Containers with lids are recommended.
• Wear shoes with rubber or high traction soles. Do not use shoes with heels, leather soles, cleats or spikes. Make sure no stones are embedded in the soles. Do not use this product in bare feet. Keep all loose clothing, shoelaces and towels away from moving parts.
• Do not reach into or underneath the unit, or tip it on its side during operation.
• Use correct ergonomic positioning while running on treadmill.
• Do not allow animals on or near the equipment while in operation.
• Use the side handrails whenever additional stability is required. In case of emergency, such as tripping, the side handrails should be grabbed and the user should place his/her feet on the side platforms. The front handlebars should be used to grasp the heart rate sensors or to rest the hand on while operating the activity zone keys, but not for stability, emergency, or continuous use.
• Do not exceed maximum user weight of300lbs.
• Do not use if you have a cold or fever.
• When using this exercise machine, basic precautions should always be followed.
• Use this equipment only for its intended use as described in this manual.
• Allow only trained personnel to service this equipment.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.

Allow only one person at a time on the equipment while it’s operating. It is the sole responsibility of the owner/operator to ensure regular and scheduled maintenance is performed.
To avoid injury, stand on the side rails before starting the treadmill.
A void exiting treadmill while leaving the tread belt in motion.
Never walk or jog backwards on the treadmill.

GROUNDING INSTRUCTIONS

This product must be grounded, if it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER:
Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.
Do not remove the motor cover or you may risk injury due to electric shock.
This model is for use on a nominal I I OV circuit and has a grounding plug. Make sure the product is connected to an outlet having the same configuration as the plug. No adaptor should be used with this product.

PARAMETERS & PACKAGE CONTENTS

REMOTE CONTROL

Remarks: The receiving dimension of the remote control is 2-5 meters.

DISPLAY PANEL GUIDE

LED Digital Display (Keys display as shown above)

1. SPEED
2. TIME
3. DISTANCE
4. CALORIES

Modes: Manual & Auto

• Manual mode: Speed and Time Adjustable
• Auto mode: 12 preset programs

Parameter

1. Voltage: 110V/60HZ
2. Minimum Speed: 0.5MPH
3. Maximum Speed: 4MPH
4. Maximum Workout Time per usage: 99 minutes
5. Maximum Calories Burning per usage: 990 Cal

MODES: AUTO & COUNTDOWN

Auto Mode
Before workout, check the cord and power switch. Display shows under standby. Press P button, Select one of the 12 presets and then press the start key, and there will be a 3 second count down and the workout will begin.
The display will show speed, time, distance, and calorie in loop.
You can adjust the speed by pressing the speed+- key.

The diagram above describes the 12 different modes available (Pl-P12). In each mode, the speed will automatically change every few minutes.
Display window shows 0:00 under standby, display window will show Pl
…………. P12 when pressing “P” key. Pressing “Time+-” key will adjust workout time. After setting it up, system will enter default state: 3 second count down, then start running.
Time Countdown (Hl) – Press and hold “P” key, display window will show1 1 Hl”, enter time countdown workout schedule.

Distance Countdown (H2) – Press and hold “P” key, display window will show” H2″, enter distance countdown.
Calorie Burning Countdown (H3) – Press and hold “P” key, display window will show “H3 “, enter calorie countdown workout schedule.

MAINTENANCE

Lubrication
The running belt must be lubricated with the specialized silicone lubricant after certain period of time. Lubrication helps to keep the machine in good working condition.

Suggested Lubricating time

• Every 5 Months – if Workout Time is less than 3 hours weekly
• Every 2 Months – if Workout Time is between 4-7 hours weekly
• Every Month – if Workout Time is more than 7 hours weekly

Methods of Lubrication
To check whether your treadmill needs lubrication, you can flip the running belt over, and feel whether the material is dry or not. If you sense a dry running belt, then it means your treadmill needs lubrication.

How to Lubricate (see picture below)
Unplug the treadmill. Lift the running belt up from the base, then put the silicone lubricant under the running belt and apply the lubricant on the belt, as well as on both sides of the treadmill frame. Then allow the treadmill selfoperating at the lowest speed for 5 minutes to make sure the lubricant distributes throughout the frame.

Running Belt Gets Loose or Slides
Every treadmill has the elastic tendency set, but it will become loose after using it for a period of time. If the belt gets loose or slide back and forth, you can turn the adjusting screws at the rear end. Try to tum them clockwise 1/4 circle (90 degrees) to adjust the running belt (repeat if necessary).
But don’t make it too tight, or it will overload the motor and causing it to malfunction.

Running Belt Deviating (Running to the sides)
Running belt may run off center due to user,s foot steps or uneven floor. If the deviation exists, you can adjust it with a 6 mm Allen wrench to adjust the screws at the rear end.

If the belt deviates to right, then you need to adjust the belt to the left to fix it. (Vice versa, adjust the belt to the right if it is deviating to the left.) Firstly, please allow the treadmill to self-operate at the lowest speed, then use the allen wrench to tum to the right or to the left screw clockwise( depends on which side it’s deviating, 1-3 circles to start with). After you see the belt running back to the center, adjust the screws on both sides to fine-tune the alignment by tuning 1/4 circle (90 degree), until the belt running at the center.
Caution: Don’t make the belt too tight, or it will overload the motor and causing it to malfunction. If the belt is not running off center. You can tum both screws counter clockwise to loosen the belt if it is too tight. Tum them clockwise if the belt is skidding or loose.

TROUBLESHOOT & SOLUTIONS

local power voltage is unstable with much high peak voltage

2. Wrong preset wheel diameter value ; 3.Control panel is under malfunction;

| 1. Need to add a filter  regulator to keep voltage stable ;

2. Reset the wheel diameter value to fit the rated voltage;

3. Replace a new control panel.

E03| Product over-curren t protection| 1. The product is over loaded;

2. There is foreign matter stuck in motor or rolling axe;

3. The roller is not lubricated enough and the resistance increases.

4. Control panel is under malfunction;

5. The motor is under malfunction and the resistance increases.

| 1. Reduce load, do not let it over

rated load;

2. Take out the foreign matter; 3.lncrease lubricant.

4.Change a new control panel 5.Change a new moto

E04| Motor

malfunction

| 1. Motor is disconnected

2. Motor is open circuit, broken; 3.Control panel is open circuit, broken;

| 1. Reconnect and make motor

lines firmer;

2. Change a new motor 3.Change a new control panel

E06| Signal error| 1. Main single wire is lose between up and down control panel.

2. Main single wire is broken between up and down control panel.

3. Electrical head is broken;

4. Control panel is broken ;

| 1. Reconnect the signal line ; 2. Change a new signal line ; 3.Change a new electrical head; 4.Change a new control panel ;
E07/—| Emergency stop device is disconnecte d| 1. Emergency stop device is not in the right place;

2. The induction line of emergency stop device is broken;

3. The interface of electrical head is broken ;

| 1. Put the emergency stop device on the right place

2. Change a new induction line; 3.Change a new electrical head;

EOC| Explosion-p roof

protection

| Power transistor is breakdown, control penal is malfunction;| Change a new control panel;

Contact Us!

Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!

E-mail
service@abv-supreme.fun

Contact Us!
Dear Customer, Thanks for buying from us.
lf you have questions or quality problems during the installation and use,please kindly contact us through Amazon message(or email to us: service @abv-supreme.fun). We will reply you within 24 hours and solve your problem as soon as we can.

Returns Policy!
We offer a returns policy equivalent to Amazon.com’s.
Ensure you enclose the correct and complete item when making a return.
The correct item must be returned to receive a refund. It can take up to 15 days for an item to reach us once you return it. Once the item is received at our fulfillment center, it takes 2 business days for the refund to be processed and 3-5 business days for the refund amount to show up in your account.

Warranty!
The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion.

References

• Amazon.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>