PUREROYI IP68 Waterproof 1.32 Inch Military Tactical Fitness Watch Tracker User Manual
- June 9, 2024
- PUREROYI
Table of Contents
IP68 Waterproof 1.32 Inch Military Tactical Fitness Watch Tracker
USER MANUAL
SMARTWATCH
Instructions
Watch client download
Scan the QR code below to download and install it to the watch client.
http://fitcloud.hetangsmart.com/qrcode/
Touch all: Slide down to enter the status setting bar, slide up to view the
notification, slide left to enter the main function interface, and slide right
to enter the split-screen menu;
BACK KEY
Short press: Short press on the dial interface to enter the main menu, double-
click on the main menu Interface to switch the menu style, short press on
other interfaces to return to the dial
Long press ： Power on/off (4-5S)
SPORT KEY
Short press: Screen on/off, short press on other interfaces to return to the
dial
Long press: Enter the sports list (6-7S)
Watch charging and activation
It can be activated by charging before using the watch for the first time;
The magnetic charger used is attached to the metal contact on the back of the
watch, and the other end of the charging cable is connected to the 5V1A USB
charging head or
computer USB interface.
BIuetooth connection guide -Android
-
Open the FitCloudPro application.
-
Find it in the list of searched devices.
At the bottom of the page, click Start Search for a device with the device name Raptor 2 and click the right link. -
During the connection process, the phone screen shows that you want to pair with Raptor Call. Check the box to allow access to contacts and call history and click on pairing.
Bluetooth connection guide -IOS
-
Open the FitCloudPro application
-
Find It In the list of searched devices.
At ths bottom of the page, click Start Search for a device with the device name Raptor 2 and click the right link. -
Click to pair with Raptor 2.
-
The watch’s dial interface swipe down into the status settings bar and click the headset icon to enter Bluetooth 5.0 pairing mode.
-
Go to iPhone Settings-Bluetooth interface and select parallel connection of the device named Raptor Call. After the watch is successfully bound, everytime the client is opened In the future, the watch will automatically connect with the mobile phone, and the data can be synchronized by pulling down the client data page.
Function Introduction
Dial Setting
Press and hold the dial interface for 3 seconds to enter the dial switching
interface, slide left and right to switch the dial to be selected, and click
the selected dial to switch the
dials of difierent styles in the watch;
After the Bluetooth connection is successful, enter the APP- dial library-dial
center-custom dial;
Step Counting
Total number of steps in 24 hours and the number of steps taken in each period
can be recorded.
More detailed data can be viewed in the mobile APP
Heart Rate
Before monitoring the heart rate, first make sure that the watch is properly
worn on the wrist (the best position is one finger wide above the wrist bone).
The heart rate etection requires that the watch be worn tightly to avoid
light leakage and cannot be efiectively detected, and then enter the heart
rate detection. During the detection process, the wrist is required to remain
stationary. When entering the heart rate measuremant Intarface, the bottom
green light lights upto start measuring.When the easurement is completed in
about 45 seconds, there will be a vibration reminder. If you are prompted to
“not waar your watch”, you need to wear your watch again. Enter the heart
rate icon interface to measure the current heart rate value;
Display the current value of the heart rate interface and the heart rate
status of each period; More detailed information analysis and data records
can be viewed on the APP side ： Sleep
You can record and display the total sleep duration and the duration of deep
sleep and shallow sleep. More detailed information analysis data records can
be viewed on the mobile APP; Audio Mode
After the audio mode is turned on , you can enter
- Call record: which can record the calls that have been made
- Common contacts: you can communicate with common contacts by phone.
- Dial-up: you can dial any phone you need to contact;
Sports Mode
Click on the exercise interface to enter the exercise interface, which
supports walking, running, mountaineering, cycling, basketball, swimming,
badminton, football, elliptical machine, yoga, table tennis, rope skipping,
tennis, baseball, rugby, hula hoop, golf, long jump, sit-ups, and volleyball
20 sports modes to choose from. Start the exercise, it will display data
such as time, steps, heart rate, calories, mileage, etc. More detailed
information analysis and data records can be viewed on the mobile APP;
Blood Pressure
Before blood pressure monitoring, first make sure that the watch is property
worn on the wrist (the best position is one finger wide above the wrist bone).
Blood pressure testing requires tight wearing to avoid light leakage and
cannot be efiectively detected, and then enter the blood pressure testing.
During the testing process, the wrist is required to remain stationary. When
entering the blood pressure measurement interface,when the bottom lights up
and starts measuring for 30-60 seconds, there will be a vibration reminder
when the measurement is completed. This measurement is based on PPG
technology.
Enter the blood pressure Icon Interface to measure the current blood pressure
value;
More detailed information analysis and data records can be viewed on the APP
side;
Blood oxygen
Before blood oxygen monitoring, first make sure that the watch is properly
worn on the wrist (the best position is one finger wide above the wrist bone).
Blood oxygen testing requires that the watch be worn tightly to avoid light
leakage end cannot be efiectively detected, and then enter the blood oxygen
testing. During the testing process, the wrist is required to remain
stationary. When entering the blood oxygen measurement interface,When the
bottom lights upand starts measuring for 30-60 seconds, there will be a
vibration remlnder when the measurement is completed. This measurement is
based on PPG technology. Enter the blood oxygen icon interface to measure the
current blood oxygen value;
Display the current value of the blood oxygen interface and the blood oxygen
status of each period;
Mors detailed information analysis and data records can be viewed on the APP
side;
Weather
After the watch is connected to the APP, this weather interface will display
the real-time weather temperature and weather type;
Show the weather of the day and the weather of the next three days;
The weather information needs to be connected to the APP to get data. If the
connection is opened for a long time, the weather information will be updated;
Music Control
After the watch is connected with the APP, it can control the pause and start
of the mobile music player, volume adjustment and song switching;
When the mobile phone plays music, you can use the watch to control the mobile
phone to play/pause, the previous song and the next song.
Timer
In the timer function, the system presets the common time duration, users can
click the corresponding time duration to quickly time, or click the custom
button to set the time.
Clicking the Start button stops the timer. Clicking the Pause button stops the
timer, and clicking the Reset button starts the timer at zero.
Alarm Clock
In the APP, you can set the smart alarm clock of the watch.
You can set a single alarm clock, a ring clock, and up to five alarms.
After the set time arrives, the watch will display the alarm clock icon and
vibrate;
Message Push
The watch can receive push notifications and call alerts from the cell phone
and reject them, and set the push option switch in the APP.
After the watch is connected to APP, the watch can receive the corresponding
push messages after the push messages are turned on in APP, and up to 15
recent messages can be saved. Other Functions
Other functions of the watch include: stopwatch, mobile phone search, female ,
settings,etc.
Set Up
Settings include menu styles ( screen displayer, battery, vibration intensity,
language, QR code, password, system).
Sedentary Reminder
Can be opened in APP [Device>Sedentary Reminder], after opening, you can set
the start time, end time, do not disturb period.
Frequently asked question and answers
Why can’t take a hot bath with my watch?
– The bath temperature is relatively high, which will produce a lot of water vapor;
Why can’t the watch receive the message push?
– Android phone settings:
– 1.Confirm that the message push switch is turned on at the mobile APP end;
– 2.The confirmation message can be displayed normaly on the mobile phone
notification bar, and the watch message is pushed by obtaining the mobile
phone notification bar message; If there is no message in the mobile phone
notification bar, the watch will not be able to receive the push; (You need to
find the notification settings in the mobile phone settings and turn on the
notification switches of WeChat, QQ, phone, SMS and mobile phone clients)
– 3.Turn on the accessibility setings of the watch (Find the auxiliary
function in the phone settings, and open the customer auxiliary function
settings on the watch side)
– Apple mobile phone set:
– 1.Confirm that the message push switch is turned on at the mobile phone
client;
– 2.Confirm that the mobile phone message can be displayed normaly in the
notification bar; (You need to find the notification setings in the mobile
phone settings and turn on the notification switches of WeChat, QQ, phone,
SMS and mobile phone clients)
Does the watch need to be charged when first receive it and how long does
it usually take to charge?
– Generally the first time you receive the watch power is full and does not
need to be charged, it usually takes 2-3 hours to be fully charged.