FULLRIVER BATTERY 942-0009 Industrial Battery Charger User Guide
- June 9, 2024
- FULLRIVER BATTERY
Table of Contents
FULLRIVER BATTERY 942-0009 Industrial Battery Charger
OVERVIEW
-
Solid Red – Charger Fault. See display panel for details.
-
Flashing Amber – Caution. External error condition. See display panel for details.
-
Flashing Green – USB port active
-
Solid Green- Safe to remove USB flash drive.
-
Solid Blue – AC power available.
-
Flashing Green – Low state of charge.
-
Solid Green – High state of charge.
-
Flashing Green – High state of charge.
-
Solid Green- Charge complete.
Selecting a Charge Profile
- Disconnect AC input from the charger, or from the wall outlet. Wait 30 seconds for the input relay to open. (See Figure 1)
- While reconnecting the AC input, press and hold the Select Charge Profile Button. Hold the button until Error Indicator is on and Battery Charging Indicator starts flashing.
- Press and release the Select Charge Profile Button to advance through charging profiles loaded on the charger. The selected charging profile will be displayed up to three times (e.g. “P-0-1- 1” for Profile 11). (See Figure 2)
- Once desired to charge profile is displayed, press and hold the button for 10 seconds to Confirm selection and exit Profile Selection Mode. (See Figure 3)
- Press the Select Charge Profile Button to check that the desired profile is selected.
For more information, visit the Delta-Q support page:
www.delta-q.com/support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>