V-TAC 7670 Outdoor Wall Lamp Instruction Manual
- June 9, 2024
- V TAC
Table of Contents
V-TAC 7670 Outdoor Wall Lamp Instruction Manual
TECHNICAL DATA:
| SKU No. | 7513 |
|---|---|
| Input Voltage | AC:220-240V, 50Hz |
| Holder | E27 15W(MAX) |
| Protection Rating | IP44 |
| Unit size | 90x250x100mm |
INSTALLATION DIAGRAM:
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installing and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING
- Ensure that the power is switched off before installation.
- Install only by certified electrician.
- Keep this manual handy for future references.
INSTALLATION INSTRUCTION
- Drill two holes on the wall and insert two plastic expansion bolts in it.
- Fix the plastic plate on the plastic expansion piece with self-tapping screws.
- Connect the supply leads with terminal.
- Open the lamp and install the bulb in the lamp
- Fix the lamp body on the plate and tighten the screws.
- Switch on and test.