V-TAC VT-407 LED Track Light Instruction Manual
- June 9, 2024
- V TAC
Table of Contents
V-TAC VT-407 LED Track Light Instruction Manual
WEEE Number: 80133970
TECHNICAL DATA
STRUCTURE & SIZE
INSTALLATION DIAGRAM
Installation instructions:
- Switch off the power.
- Fix the lamp into the track and turn adaptor slide switch. (picture 1)
- Adjust the illumination angle of the luminaire.(picture 2)
- Switch on the power if above steps done properly without any mistakes.(picture 3)
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installing and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
INSTALLATION REQUIREMENT
- Install only by certified electrician.
- Please connect with the driver properly before connecting main supply.
- Proper grounding should be ensured throughout installation.
- The lighting should be located in dry area.
INSTALLATION INSTRUCTIONS
- Switch off the power.
- Install and Fix the fixture according to the steps below.
- Connect the power (220-240V) if all steps are done properly with no mistakes.
In case of any query/issue with the product, please reach out to us at:
support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest
dealers. V-TAC EUROPE LTD
Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B