AeroGarden Tabletop Grow Light User Guide
- June 9, 2024
- AeroGarden
Table of Contents
AeroGarden Tabletop Grow Light
A Solution for Plant Lighting
Go on, level up your house plant game with our innovative grow light system customizable to your plant’s needs.
Assembly Instructions
- Insert bottom of post into base. Turn base upside down and, using a phillips head screwdriver (not included), lightly screw in the post with the two screws provided. Do not overtighten.
- Once installed, turn the base right-side up and screw the LED light hood into the top of the post. Tighten gently.
- Connect the power cord adapter to the receiver at the bottom of the post and plug in to start your 10-hour Light ON cycle. Your grow light will now turn ON and OFF automatically.
- Touch anywhere on the top of the light hood to manually turn on/dim/off your light. To unlock more features (light modes, custom lights schedules, and more), download the AeroGarden App on the App Store” or Google PlayM store.
Tips and Tricks
- For best results, maintain a minimum of 4″ between the grow light and the top of your plant.
- To change when your light comes ON each day, unplug your light and plug it back in at your desired start time.
- AeroGarden Grow Lights provide customization for your plants. Experiment with light cycles, light modes, and dimming levels that work for you and your plants.
Unlock Additional Settings Through the AeroGarden App!
- Easy on/off
- Customizable 100-0% light dimming
- Customizable on/off light schedule, including adjustable length of time
- Customizable sunrise/sunset setting that provides a gentle change of your grow light to Simulate sunrise and sunset
- 4 light modes to choose from: full spectrum, white, warm, and cool. Full Spectrum mode is the recommended default and provides optimal plant health. Additional light modes offer more color customizations and provide light for increased plant health.
What’s Included
- LED light hood (10W)
- Post
- Power adapter
- Metal base (2) screws
Not included: phillips head screwdriver
Good to Know
- Connect your grow light to the AeroGarden app to unlock additional features. Download the AeroGarden
- App on the App Store” or Google PlayH store.
- Your grow light will start its light ON cycle the moment it is plugged in.
- Preset light cycle is 10 hours ON and 14 hours OFF in a 24 hour cycle, turning on at the same time every day
- Set custom light cycles in the app.
- Your grow light’s post is about 24 inches long when fully extended.
- To avoid damage, do not collapse or extend your post by pulling or pushing on the LED hood.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
When using the AeroGarden Grow Light, basic precautions should always be
followed. Read all instructions before using your Aero Garden” product.
DANGER!- To reduce the risk of electric shock:
-
The Grow Light has a specific plug. Do not change or modify the plug in any way
-
Always unplug the Grow Light from electrical outlet before cleaning
WARNING! – to reduce risk of burns, fire, electric shock, or injury to persons: -
Unplug the Grow Light from outlet before putting on or taking off parts
-
Please take proper precautions when operating a Grow Light near or by individuals requiring close Supervision, including children
-
Use the Grow Light only for its intended use as described in its instructions
-
Never operate the Grow Light if it has a damaged cord or plug, if it’s not Working properly, it it has been dropped and damaged, or if it has been dropped in water. If any of these conditions OCcur, contact www.aerogarden. com/contact-us or your country’s local distributor for instructions
-
Keep cord away from heated surfaces
-
Never operate furnishing with air openings blocked. Keep air openings free of lint, hair, and the like
-
Never drop or insert any object into any electrical openings
-
Do not use outdoors
-
Do not operate where aerosol (spray) products are being used or where Oxygen IS being administered
-
Do not touch moving parts, or hot parts, such as lights, reflective surfaces, and the like
-
To disconnect, remove plug from outlet
-
Do not place or submerge base, cord, plug, or light hood in water or other liquid to clean it
-
Do not allow water to contact hot LED Grow Light
-
Use only approved and supplied parts and accessories. Use of any other kind of accessory Is not recommended.
-
Do not use the Grow Light for reasons other than its intended purpose
-
This product iS for commercial applications
-
This product is intended for household and residential use only. This Oduct If supply cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified technician in order to avoid hazard.
-
Electrical wiring must be in accordance with local regulations
-
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knoOwledge, unless they have been given supervision or instruction concerning use of appliance by a person responsible for their safety
-
Children should be supervised to ensure that they do not play with the appliance
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful Interference, and (2) this device must accept any interterence received, incuding interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: Ihis equipment has been tested and found to comply with the limits for a dass B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance WIth the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Lonnect the equipment into an outlet on a circuit different from that to which the receiveris connected.
- Consult the dealer or an experienced radio/ IV technician tor help.
The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC’S RF exposure guidelines, this equipment should be installed and operated with a minimum distance of Z0cm between the radiator and your body.
LIMITED WARRANTY
WHAT IS COVERED – Ihis warranty covers any defects in materials or workmanship, with the exceptions stated below.
HOW LONG COVERAGE LASIS – This warranty runs for one (0) year on the AeroGarden LED Grow Light from the date of original purchase, for the original purchaser/user.
WHAT IS NOT COVERED – The warranty shal not apply to problems arising from: normal wear, failure to adhere to enclosed operating instructions; serial numbered products if the serial number has been removed or defaced; products subject to negligence, acident, improper use, maintenance or storage; products damaged by circumstances beyond AeroGrow lnternational Inc.s control; loss or damage to removable parts; or products modified (including, but not limited to, modifications through the use of unauthorized parts or attachments) or repaired by anyone other than AeroGrow International, Inc., or its designee. Ihis warranty exdudes all incidental or consequential damages.
WHAT AEROGROW WILL DO -AeroGrow International, Inc, at is an option, will repair any defect in materials or workmanship or will eplace this product with ones of similar features and price. AeroGrow International, nc. s sole obligation and your exclusive remedy under this warranty shall be limited to such repair or replacement
TO RETURN THIS PRODUCT – For any questions or concerns, or for more information, visit our website at www.aerogarden.com. Our customer service representatives are available via Live Chat and Email. Please do not return any product without contacting AeroGrow for return authorization. Unauthorized returns, as well as C0.0. shipments, will be refused. For more information regarding returns, please see the Returns section at www.AeroGarden.com Due to continuing improvements, actual product may difer slightly from the product described herein. Some states do not allow the exdlusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This waranty gives you specific legal rights, and you may have other legal rights that vary from state to state.
AeroGrow International, Inc., P.O. Box 18450, Boulder, C0 80308-1450 2022 AeroGrow International, Inc. www.aerogarden.com AGTBIO01/02 Designed in Boulder, CO. Made In China. Sold by: The Scotts Company 1411 Scottslawn Road, Marysville, OH 43041 App Store is a trademark of Apple Inc. Google Play is a trademark of Google LLC
Electrical Ratings
- Adapter Input: 100-240VAC, 50/60Hz
- Adapter Output: 12VDC, 1.2A
- Grow Light Input : 12VDC, 0.9A
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>